• The korean journal of orthodontics
• /
• 제26권3호
• /
• pp.291-299
• /
• 1996

Orthodontic force is a mechanical stress controlling both of tooth movement and skeletal growth. The mechanical stress stimulate bone cells that may exert some influence on bone remodeling. The purpose of this study was to evaluate the difference in cellular activity depending on mechanical stresses such as compressive and tensile force by determining the alkaline phosphatase(ALP) activity. A clonal osteogenic cell line MC3T3-E1 was seeded into a 24-well plate($2{\times}10^4/well$). At the confluent phase, a continuous compressive hydrostatic pressure($25g/cm^2$, $300g/cm^2$) and continuous tensile hydrostatic pressure($-25g/cm^2$, $-300g/cm^2$) were applied for 4, 6, 10, 14, 18, 20 days respectively by a diaphgragm pump. At the end of the stimulation period, cell layers were prepared for ALP activity assay. The ALP activity of the compressive group increased more than that of the tensile group at same force magnitude, whereas the cells responded to a similar pattern regardless of the type of mechanical stress The ALP activity of the compressive and tensile group turned into the level of the control group as the length of time increased. These results indicated that a mechanical stress may be more effective on cellular activity during active cellular proliferation and differentiation periods. The time to achieve maximum ALP activity was delayed as the mechanical stress increased in both the compressive and the tensile group. Accordingly, the magnitude of the stress rather than the type of mechanical stress may have more influence on cellular activity.

• Korean Journal of Psychosomatic Medicine
• /
• 제21권2호
• /
• pp.140-146
• /
• 2013

Objectives: We compared the characteristics of the pain threshold and pain experience between demented group and non-demented group. Methods: This study was part of Gangwon projects for early detection of dementia in 2010. We recruited 8302 local resident ages over 65 years old. Of theses, 1259 people who scored low MMSE were selected and 365 of them completed CERAD-K(Consortium to Establish a Registry for Alzheimer's disease). Finally, 90 in non-demented group and 57 in demented group(mild to moderate Alzheimer's disease) were analyzed. Pain threshold was experimentally measured by pressure algometer and we investigated the pain experience, by Brief pain inventory (BPI), a self-report test. Results: In the demographic characteristics, there are more female, higher ages, lower education in the demented group. There was no significant difference between the two groups in the pain threshold. On the BPI results, 'shoulder pain', 'the number of pain' and 'interference of working' were significantly more prevalent in non-demented group. However, there are no significant differences between the groups in the 'pain severity', 'prevalence of pain' and 'pain treatment'. Conclusions: Demented group report less pain experience but, still perceived pain. It support previous studies that patient with dementia have increased pain tolerance but preserved pain threshold. Thus, active pain assessment and treatment for patients with dementia is needed.

• Journal of Chest Surgery
• /
• 제29권5호
• /
• pp.477-486
• /
• 1996

Endogenous analgesic systems are known to be activated by peripheral noxious stimulation as well as arterial carbon dioxide elevation. In the present study, neuronal Activities in the rostral ventrolateral med- ulla were identified and classified in according to their rhythmic activities, and their responses to noxious peripheral nerve stimulations before and after elevating the arterial carbon dioxide partial pressure were investigated Using extracellular recording technic, a total of 53 spontaneously active neurons were recorded from the rostral ventrolateral medulla in u-chloralose anesthetized cats. These were classified as cardiovascular (28), respiratory (16), both cardiovascular and respiratory (2) and noncardiovascular - nonrespiratory (7). - Among the 28 cardiovascular neurons eleven showed increased activities during arterial hypercapnia, thirteen showed decreased responses, and four showed no change. Nine respiratory neurons showed increased responses to arterial hypercapnia, six showed decreased responses and one showed no change. neither of the cardiovascular and respiratory neurons showed significant change in its activity during ar- terial hypercapnia, however, four of the noncardiovascular - nonrespiratory neurons exhibited decreased their activities in response to arterial hypercapnia while two exhibited increased activities. Arterial hypercapnia increased the responses of cardiovascular neurons to peripheral nerve stimulation with C-inteniity, while not changing the responses to Ak_stimulation significantly . From the above results it was conclllded that during arterial hypercapnia, some cardiovascular neurons and respiratory neurons have increased activities as well as increased reponses to C-Hber stimulation.

• Applied Chemistry for Engineering
• /
• 제21권3호
• /
• pp.343-348
• /
• 2010

The surface of low density polyethylene (LDPE) film was oxyfluorinated under different reaction conditions to introduce hydroperoxide groups and change surface characteristics. Hydroperoxide functional groups created by oxyfluorination were used as active sites for graft polymerization with hydrophobic monomer, acryl amide (AM), and hydrophilic monomer, methyl methacrylate (MMA) to carry out the second modification of the LDPE film surface. The surface properties of the OFPE films and grafted OFPE films were characterized by 1,1-diphenyl-2-picrylhydrazyl (DPPH) radical scavenging method, ATR-IR, contact angle measurement and DSC. From the results of DPPH method, the amount of hydroperoxide groups on the oxyfluorinated LDPE film continuously increased as the total pressure in the oxyfluorination and the partial pressure of fluorine gas increased. The water contact angle and surface free energy measurements showed that hydrophilic liquid (water) contact angle on LDPE film surface decreased with hydrophilic AM grafting and hydrophobic liquid (methylene diiodide) contact angle on LDPE film surface decreased with hydrophobic MMA grafting. These were attributed to AM or MMA monomer grafting and the wettability of LDPE filmsurface to hydrophilic and hydrophobic liquids were improved.

• Journal of the Korean GEO-environmental Society
• /
• 제14권7호
• /
• pp.19-29
• /
• 2013

Analysis via classical soil mechanics theory is either ineffective or inappropriate for fully describing stress distribution or failure conditions in cold regions, since mechanical properties of soils in cold regions are different from those reported in the classical soil mechanics theory. Therefore, collecting and analyzing technical data, and systematic and specialized research for cold regions are required for design and construction of the structure in cold regions. Freezing and thawing repeat in active layer of permafrost region, and a loading condition affecting the structure changes. Therefore, the reliable analysis of mechanical properties of frozen soils according to various conditions is prerequisite for design and construction of the structure in cold regions, since mechanical properties of frozen soils are sensitive to temperature condition, water content, grain size, relative density, and loading rate. In this research, the direct shear apparatus which operates at 30 degrees below zero and large-scaled low temperature chamber are used for evaluating shear strength characteristics of frozen soils. Weathered granite soil is used to analyzed the shear strength characteristics with varying freezing temperature condition, vertical confining pressure, relative density, and water content. This research shows that the shear strength of weathered granite soil is sensitively affected by various conditions such as freezing temperature conditions, normal stresses, relative densities, and water contents.

• Nuclear Engineering and Technology
• /
• 제47권3호
• /
• pp.293-305
• /
• 2015

In this paper, we suggest the conceptual design of a water-cooled reactor system for a low-pressure inherent heat sink nuclear desalination plant (LIND) that applies the safety-related design concepts of high temperature gas-cooled reactors to a water-cooled reactor for inherent and passive safety features. Through a scoping analysis, we found that the current LIND design satisfied several essential thermal-hydraulic and neutronic design requirements. In a thermal-hydraulic analysis using an analytical method based on the Wooton-Epstein correlation, we checked the possibility of safely removing decay heat through the steel containment even if all the active safety systems failed. In a neutronic analysis using the Monte Carlo N-particle transport code, we estimated a cycle length of approximately 6 years under 200 $MW_{th}$ and 4.5% enrichment. The very long cycle length and simple safety features minimize the burdens from the operation, maintenance, and spent-fuel management, with a positive impact on the economic feasibility. Finally, because a nuclear reactor should not be directly coupled to a desalination system to prevent the leakage of radioactive material into the desalinated water, three types of intermediate systems were studied: a steam producing system, a hot water system, and an organic Rankine cycle system.

• Nuclear Engineering and Technology
• /
• 제45권5호
• /
• pp.605-612
• /
• 2013

Removal of decay heat from an operating reactor during a prolonged station blackout condition is a big concern for reactor designers, especially after the recent Fukushima accident. In the case of a prolonged station blackout condition, heat removal is possible only by passive means since no pumps or active systems are available. Keeping this in mind, the AHWR has been designed with many passive safety features. One of them is a passive means of removing decay heat with the help of Isolation Condensers (ICs) which are submerged in a big water pool called the Gravity Driven Water Pool (GDWP). The ICs have many tubes in which the steam, generated by the reactor core due to the decay heat, flows and condenses by rejecting the heat into the water pool. After condensation, the condensate falls back into the steam drum of the reactor. The GDWP tank holds a large amount of water, about 8000 $m^3$, which is located at a higher elevation than the steam drum of the reactor in order to promote natural circulation. Due to the recent Fukushima type accidents, it has been a concern to understand and evaluate the capability of the ICs to remove decay heat for a prolonged period without escalating fuel sheath temperature. In view of this, an analysis has been performed for decay heat removal characteristics over several days of an AHWR by ICs. The computer code RELAP5/MOD3.2 was used for this purpose. Results indicate that the ICs can remove the decay heat for more than 10 days without causing any bulk boiling in the GDWP. After that, decay heat can be removed for more than 40 days by boiling off the pool inventory. The pressure inside the containment does not exceed the design pressure even after 10 days by condensation of steam generated from the GDWP on the walls of containment and on the Passive Containment Cooling System (PCCS) tubes. If venting is carried out after this period, the decay heat can be removed for more than 50 days without exceeding the design limits.

• Journal of Korean Medicine Rehabilitation
• /
• 제25권1호
• /
• pp.45-52
• /
• 2015

Objectives To check marker content for appropriate quality control of Woohwangchungsimwon sterilized to ensure microbiological safety and to observe antioxidant activity for any changes in efficacy. Methods To measure any effects of sterilization on the effective compounds, 8 ingredients of Woohwangchungsimwon were screened for any changes in marker content using HPLC-DAD. Using the colorimetric method on the microplate reader any changes in total phenolic compound and flavonoid levels were observed. Antioxidant activity was measured using the DPPH, ABTS, and FRAP. Results Of the ingredients of Woohwangchungsimwon, 8 were subject to quantitative analysis before and after sterilization. 21.6 mg and 1.93 mg of Glycyrrhizin was found in Glycyrrhiza uralensis Fischer pre and post sterilization, respectively. Decursin found in Angelica gigas Nakai increased from 0.16 mg to 0.29 mg after sterilization. Bilirubin found in Gallstone of Bostaurusvar. domesticus increased from 0.24 mg to 0.33 mg. Cinnamic acid found in Cinnamomum cassia Blume increased from 0.02 mg to 0.05 mg. Ginsenoside Rb1 found in Panax ginseng C. A. Meyer decreased from 0.02 mg to 0.14 mg. Paeoniflorin found in Paeonia lactiflora Pallas increased from 1.05 mg to 1.13 mg. Amygdalin found in Armeniacae Amarum Semen increased from 2.68 mg to 2.83 mg. L-muscone found in Musk increased from 0.63 mg to 0.76 mg. As for total phenolic compound and total flavonoid content, there was a 1.22 and 4.15-fold increase. DPPH and ABTS increased by 20.45% and 20.69%, respectively. FRAP activity was 2.78 times more active post stabilization. Conclusions This study confirmed that high temperature high pressure steam sterilization, a method used to ensure microbiological safety of Woohwangchungsimwon, does not affect marker content; in other words, does not affect quality of the Woohwangchungsimwon. It could also be seen that total phenolic compound and flavonoid content increased after sterilization. An antioxidant activity test showed that there was significantly increased activity of antioxidants.

• Journal of the Korean GEO-environmental Society
• /
• 제18권7호
• /
• pp.13-20
• /
• 2017

Soil nailing is ground reinforcement method using the shear strength of ground and the pullout shear resistance force of nail. It is mainly used for reinforcement of cut slopes, earth retaining structures and retaining walls, etc. It may be designed considering the pullout resistance of nail in the case of earth retaining structure and retaining wall, but it should be designed considering not only pullout resistance but also shear and bending resistance in the case of slope. However, conservative designs considering only pullout resistance are being done and most of the studies are about increasing pullout resistance by improving of material, shape and construction method of nail. Actually, Shear bending deformations occur centering on the active surface in ground reinforced with the nail. The grout with relatively low strength is destroyed and separated from the reinforcing material. As a result, the ground is collapsed while reducing the frictional resistance rapidly. Therefore, it is necessary to develop the method to increase the shear resistance while preventing separation of nail and grout body. In this study, an experimental study was conducted on new soil nailing method which can increase shear resistance by forming protrusions through pressurized grouting after installing a packer on the outside of deformed bar.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 한국전기전자재료학회 2008년도 하계학술대회 논문집 Vol.9
• /
• pp.169-169
• /
• 2008

To keep pace with scaling trends of CMOS technologies, high-k metal oxides are to be introduced. Due to their high permittivity, high-k materials can achieve the required capacitance with stacks of higher physical thickness to reduce the leakage current through the scaled gate oxide, which make it become much more promising materials to instead of $SiO_2$. As further studying on high-k, an understanding of the relation between the etch characteristics of high-k dielectric materials and plasma properties is required for the low damaged removal process to match standard processing procedure. There are some reports on the dry etching of different high-k materials in ICP and ECR plasma with various plasma parameters, such as different gas combinations ($Cl_2$, $Cl_2/BCl_3$, $Cl_2$/Ar, $SF_6$/Ar, and $CH_4/H_2$/Ar etc). Understanding of the complex behavior of particles at surfaces requires detailed knowledge of both macroscopic and microscopic processes that take place; also certain processes depend critically on temperature and gas pressure. The choice of $BCl_3$ as the chemically active gas results from the fact that it is widely used for the etching o the materials covered by the native oxides due to the effective extraction of oxygen in the form of $BCl_xO_y$ compounds. In this study, the surface reactions and the etch rate of $Al_2O_3$ films in $BCl_3/Cl_2$/Ar plasma were investigated in an inductively coupled plasma(ICP) reactor in terms of the gas mixing ratio, RF power, DC bias and chamber pressure. The variations of relative volume densities for the particles were measured with optical emission spectroscopy (OES). The surface imagination was measured by AFM and SEM. The chemical states of film was investigated using X-ray photoelectron spectroscopy (XPS), which confirmed the existence of nonvolatile etch byproducts.