• Journal of Advanced Marine Engineering and Technology
• /
• v.30 no.1
• /
• pp.65-72
• /
• 2006

Heat transfer augmentation in heat exchangers has received much attention in recent years, mainly due to energy efficiency and environmental considerations. Many active and Passive techniques are currently being employed in heat exchangers, with some inserts providing a cost-effective and efficient means of augmenting heat transfer. The Purpose of this paper is to determine the pressure loss and heat transfer characteristics of a heat exchanger using static mixing technology. Experimental measurements were taken on two set-ups: a single tube heat exchanger and a shell-tube heat exchanger with two static mixing inserts. It was concluded that the static mixing inserts resulted in an increase in the pressure loss and heat transfer characteristics as can be expected.

• Journal of the Korean Society of Safety
• /
• v.12 no.3
• /
• pp.139-146
• /
• 1997

In this study, centrifugal model tests were performed to investigate the behavior of excavated earth retaining wall with the depth of excavation and different types of wall(aluminum, steel panel). Jumunjin standard sand was used for foundation soil. The raining method was adopted to form the required relative density of the model ground. The lateral earth pressure measured from tests were compared with estimated active earth pressure by Rankine's theory. The test results have shown that the earth pressure acting on the retaining wall and the rotation displacement of the wall are influenced by the depth of excavation and the type of wall. It was found from the test results that the deformation of the wall increases with the depth of excavation.

• Ocean Systems Engineering
• /
• v.2 no.1
• /
• pp.17-31
• /
• 2012

This study investigated the behavior of a non-isothermal $CO_2$ bubble formed through a leak process from a high-pressure source in a deep sea. Isenthalpic interpretation was employed to predict the state of the bubble just after the leak. Three modes of mass loss from the rising bubble were demonstrated: dissolution induced by mass transfer, condensation by heat transfer and phase separation by pressure decrease. A graphical interpretation of the last mode was provided in the pressure-enthalpy diagram. A threshold pressure (17.12 bar) was identified below which the last mode was no longer present. The second mode was as effective as the first for a bubble formed in deep water, leading to faster mass loss. To the contrary, only the first mode was active for a bubble formed in a shallow region. The third mode was insignificant for all cases.

• Journal of the Korean Society for Precision Engineering
• /
• v.22 no.5 s.170
• /
• pp.138-143
• /
• 2005

Recently, automobile manufacturers regarding stability, economic environmental-friendly problems by the development of automobile, environmental problem as designing the exhaust system. Increasingly strict environmental regulations to lower fuel consumption and reduce emission. Also to reduce the noise and the vibration of the automobile. According to develop variable type muffler, dual muffler and active intelligence exhaust system unit. Improvement in engine performance and fuel consumption rate demand information of pressure fraction and heat characteristics. To be able to determine these factor for we experiment on each case of exhaust system unit. In this study, how back pressure is distributed in flow-through in exhaust system and how to design exhaust system flexibleness, efficiency and combustion charateristics influenced by back pressure. This study furnish basic data for engineers, technicians.

• The Bulletin of The Korean Astronomical Society
• /
• v.44 no.1
• /
• pp.75.3-75.3
• /
• 2019

Understanding how ram pressure stripping (RPS) affects the star formation activity of cluster galaxies is one of the important issues in astrophysics. To examine whether we can identify any discernible trend in the star formation activity of galaxies undergoing ram pressure stripping, we study the star formation properties of galaxies in the Virgo cluster for which high-resolution HI images are available. We first classify galaxies in the Extended Virgo Cluster Catalog into different stages of RPS based on their HI morphology, HI deficiency, and location in phase space. We then examine various star formation activity indicators of these galaxies, which include starburstiness, g - r color, and WISE [3.4]-[12] color. No noticeable enhancement in star formation was identified for galaxies undergoing early or active stripping. Our results suggest that star formation activity at best seems to be enhanced locally in such galaxies, making it challenging to detect with integrated photometry. With the combination of HI deficiencies and locations in phase space, we were instead able to capture the overall quenching of star formation activity with increasing degree of ram pressure stripping, which agree with previous studies.

• The Bulletin of The Korean Astronomical Society
• /
• v.44 no.1
• /
• pp.77.2-77.2
• /
• 2019

NGC 4522 is one of the best-known examples among the Virgo galaxies undergoing active ram pressure stripping. There have been a number of detailed observational and theoretical studies on this galaxy to constrain its stripping and star formation history. However, the impact of ram pressure on the multi-phased ISM, in particular molecular gas which plays an important role in star formation, is still not fully understood. NGC 4522, as a system where the extra-planar molecular gas is identified, is an ideal case to probe in depth how ram pressure affects molecular gas properties. Aiming to get more theoretical insights on the detailed stripping process of multi-phased ISM and its consequences, we have conducted simulations using the TIGRESS which could reproduce the realistic ISM under comparable conditions as NGC 4522. In this work, we compare the fraction of gas mass to stellar mass, star formation rates and gas depletion time scales of NGC 4522 with those measured from the simulations, not only inside the disk but also in the extra-planar space.

• Journal of Korean Physical Therapy Science
• /
• v.19 no.2
• /
• pp.63-71
• /
• 2012

Purpose : This study aimed to acquire a basic knowledge about lumbar stability and inquire into exercise approach of pressure biofeedback unit for lumbar stability. Methods : This study was composed with reviewed theory of lumbar stability and several books and articles for exercise using pressure biofeedback unit. Results : The stability of lumbar should work symmetrical with passive, active, control subsystem in neutral zone, and local muscles should be using for stability. Especially, selective using of transverse abdominis work for lumbar stability importantly. The control of using pressure biofeedback unit may important not only examination but treatment. Conclusion : The stability of lumbar need co-contraction of specific local muscle and training for timing as well as using pressure biofeedback unit for accurate control may use for examination and therapedic approach.

• Journal of rehabilitation welfare engineering & assistive technology
• /
• v.10 no.1
• /
• pp.47-57
• /
• 2016

In this paper, we measured human body signals in order to verify a active harness system that we developed for gait and balance training. The experimental procedure was validated by tests with 20 healthy male subjects. They conducted motions of Activities of Daily Living(ADL)(Normal Walking, Stand-to-Sit, Sit-to-Stand, Stair Walking Up, and Stair Walking Down) according to body weight support rates (0%, 30%, 50% of subjects' body weight). The effectiveness of the active harness system is verified by using the results of foot pressure distribution. In normal walking, the decrease of fore-foot pressure, lateral soleus muscle and biceps femoris muscle were remarkable. The result of stand-to-sit results motion indicated that the rear-foot pressure and tibialis anterior muscle activities exceptionally decreased according to body weight support. The stair walking down show the marked drop of fore-foot pressure and rectus femoris muscle activities. The sit-to-stand and stair walking up activities were inadequate about the effect of body weight support because the velocity of body weight support system was slower than male's activity.

• The Journal of Traditional Korean Medicine
• /
• v.15 no.1
• /
• pp.128-144
• /
• 2006

This Study aims at looking into the use of oriental medical services in treating hypertension. The first objective to be explored through this study is the morbidity caused by the disease, classifying them by age, gender, and occupation. The second is to determine the regular use of anti-hypertensive medicine and their efficacy in controlling blood-pressure. The third is to investigate the use-rate and satisfaction of oriental medical service. 838 households across the country, were asked to answer questionnaires for the period of time from Apr. to Jun. 2005. The conclusion from the survey can be summarized as following. The age of which the first medical diagnosis of hypertension were made showed lower in males, those with higher education and income. The study showed females were more active in blood-pressure control, with their frequent monitoring of blood-pressure for the past year. With age, people in under 50 age group proved to be less active. The management of high blood pressure was more effective in group with regular dosage compared to group with irregular use of anti-hypertensive medication, but their difference was minimal. Also, group with no medication showed signs of blood-pressure control. The use of oriental medical service for the past year, were more frequent in groups with lower education, either low or high income, old age, females and occupations in agriculture, forestry and fishing industry. Results were similar in both general population and high blood-pressure patient group. Females, people over 51 years old and with lower education showed more intentions in utilizing oriental medical services in the future. Results were similar in both general population and high blood-pressure patient group. It is necessary to offer a more accurate information on oriental medical treatments. Also, a systematic reform to reduce the patient's share of the treatment cost, as well as, heightening public awareness on the infirmity of present blood-pressure management system is crucial.

• Journal of KSNVE
• /
• v.11 no.3
• /
• pp.401-409
• /
• 2001

Passive type mufflers installed on every car haute inherent problem of lowering engine power and fuel efficiency caused by backpressure which is byproduct of complex internal structure. Recent improvements like installing a calve to change exhaust gas path depending on power requirement and rpm have only marginally improved performance. Tremendous amount of recent research works on active exhaust noise control have failed to commercialize because of numerous physical and economical reasons. In this paper, a unique seal-active muffler using difference of transmission paths is presented. In this system exhaust pipe is divided into two and joined again downstream. Exhaust noise is reduced by destructive interference when two-divided noise join again with transmission paths'difference which is half of the wavelength of a main noise frequency. One divided path has a sliding mechanism to change length thereby transmission path length difference is adjusted to entwine rpm change. The proposed system has minimal backpressure and does not need a secondary sound source like a speaker so it can overcome many problems of failed active noise control methods. We have verified proposed system's superior performance by simulation and comparison experiment with passive mufflers.