• 한국세라믹학회지
• /
• 제36권10호
• /
• pp.1087-1093
• /
• 1999

Bioglass which is one of the surface active bionmaterials has a good biocompatibility but a poor mechanical strength, In the present work therefore two types of fluoride-containing bioglasses were coated on an alumina to improve mechanical strength. Crystallization of the coating layer and the hydroxyapatite formation on the bioactive glass coatings in tris-buffer solution were studied. When bioactive glass coated alumina was heat-treated Na2CaSi3O8 crystal was formed on the layer at lower temperature while wollastonite(CaSIO3) was obtained at higher temperature. Hydroxyapatite forming rate on the coating layer with Na2CaSi3O8 crystal was delayed with SiO2 contents in glass composition. However the hydroxyapatite was developed in 20minutes regardless SiO2 contents when the coating layer crystallized into wollastonite. More amount of P3+ ions were leached out of the coating layer with wollastonite than that with Na2CaSi3O8 crystal while Na+ and Ca2+ ions were leached out more easily from the Na2CaSi3O8 crystal containing coating layer.

• 한국세라믹학회지
• /
• 제30권5호
• /
• pp.339-346
• /
• 1993

Inproving laser efficiency, optimum content of Nd3+ which is active ion and effect of Cr3+ as a sensitizer are investigated in 60SiO2.30Li2O.10CaO host glass. The glasses are fabricated with the addition of Nd3+, Cr3+ and then optical properties such as absorption spectrum, fluorescence spectrum and fluorescence lifetime were studied. Finally, lasing efficiency was measured. From this study, optimum content of Nd2O3 appeared to be 3.5wt% and it was observed that the energy absorbed by optical exicitation of the Cr3+ is transfered to the Nd3+. Addition of Cr2O3 tend to improve characteristic of laser oscillation for the laser glass.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2010년도 제39회 하계학술대회 초록집
• /
• pp.248-248
• /
• 2010

We have demonstrated new functionalities of Ag-doped chalcogenide glasses based on their capabilities as solid electrolytes. The influence of silver on the properties of the newly formed materials is regarded in terms of diffusion kinetics, and Ag saturation is related to the composition of the hosting material. Silver saturated in chalcogenide glass has been used in the formation of solid electrolyte, which is the active medium in the programmable metallization cell (PMC) device. In this paper, we investigated the optical properties of Ag-doped chalcogenide thin film by He-Ne laser beam exposure, which is concerned with the Ag-doping effect of PMCs before or after annealing. Chalcogenide bulk glass was fabricated by a conventional melt quenching technique. Amorphous chalcogenide and Ag thin films were prepared by e-beam evaporation at a deposition rate of about $4\;{\AA}/sec$. As a result of resistance change with laser beam exposure, the resistance abruptly dropped from the initial value of $1.4\;M{\Omega}$ to the saturated value of $400\;{\Omega}$.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2009년도 9th International Meeting on Information Display
• /
• pp.513-516
• /
• 2009

The cross-talk, which occurs due to the phosphor decay time, is a critical problem in the 3D PDP TV. First, we investigated the factors that affected the cross-talk in waveforms. After the investigation, we designed the driving waveforms for the 3D PDP TV. We also obtained a better result by controlling the driving timing of 3D active glasses.

• KIEAE Journal
• /
• 제3권3호
• /
• pp.51-58
• /
• 2003

This Study aims to evaluate the interior atmospheres of atrium by glass colours. For the purpose, the 1/50 scale model of one-sided atrium was made and images of interior atmospheres were pictured under clear sky conditions. And then, questionnaire surveys were conducted on K university students in department architecture engineering. The survey results were analyzed by SPSS program. Frequency and correlation analysis were performed. As results, clear glass is chosen as the most preferred glass colour in any seasons. And, green and blue glasses are preferred in the order. And then, it is revealed that the main variables affecting satisfaction of interior atmospheres are a little changed by thermal senses of seasons. These variables are "bright", "neat", "warm", "comfort", "stable", "active", "static", "elegant" and "cool" through correlation analysis.

• 한국세라믹학회지
• /
• 제38권9호
• /
• pp.839-845
• /
• 2001

원자력발전소에서 발생하는 폐수지, 잡고체, 붕산폐액을 유리화 하기 위하여 폐기물별 조성을 바탕으로 유리조성 연구를 수행하였다. 폐수지, 잡고체를 각각 유리화 할 수 있는 두 개 의 후보유리 RG-1과 DG-1 그리고 폐수지, 잡고체, 붕산폐액을 혼합하여 처리할 수 있는 후보유리 MG-1을 개발하였다. 각 후보유리에 대해 운전변수, 고화체 품질, 가용 효과를 평가하였으며 일부 특성들은 실험실적으로 확인하였다. 운전 변수 가운데 유리의 점도와 전기 전도도는 세 후보유리 모두 적정운전 범위값 내에 만족하였으며 밀도, 화학적 견고성, 상안정성 등 고화체의 품질 또한 우수하였다. 개발한 유리 조성 연구를 바탕으로 폐수지, 잡고체, 혼합폐기물을 유리화 할 경우 감용비는 각각 21, 89, 75로 평가되었다.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2011년도 춘계학술발표대회
• /
• pp.53.1-53.1
• /
• 2011

Bioactive glass powders were synthesized by hydrothermal chemical route by the use of ultrasonic energy irradiation. We used sodalime, calcium nitrate tetra hydrate and di ammonium hydrogen phosphate as the precursor material to synthesize $SiO_2$ rich bio-active glass materials. The $SiO_2$ content was varied in the precursor mixture to 60, 52 and 45 mole%. Dense compacts were obtained by microwave sintering at $1,100^{\circ}C$. Mechanical properties were characterized for the fabricated dense bioactive glasses and were found to be comparable with conventional CaO-$SiO_2$-$Na_2O$-$P_2O_5$ bioactive glass. Detailed biocompatibility evaluation of the glass composition was investigated by in-vitro culture of MG-63 cell and mesenchyme stem cell. Cell adhesion behavior was investigated for both of the cell by one cell morphology for 30, 60 and 90 minutes. Cell proliferation behavior was investigated by culturing both of the cells for 1, 3 and 7 days and was found to be excellent. Both SEM and confocal laser scanning microscopy were used for the investigation. Western blot analysis was performed to evaluate the bimolecular level interaction and extent and rate of specific protein expression. The ability to form biological apatite in physiological condition was observed with simulated body fluid (SBF). In-vivo bone formation behavior was investigated after implanting the materials inside rabbit femur for 1 and 3 month. The bone formation behavior was excellent in all the bioglass compositions, specially the composition with 60% $SiO_2$ content showed most promising trend.

• Archives of Plastic Surgery
• /
• 제42권6호
• /
• pp.776-782
• /
• 2015

It is believed that surgery on human immunodeficiency virus (HIV)-positive patients is dangerous and should be avoided due to the possibility of postoperative infection of the patients or HIV occupational transmission to the medical staff. We discuss here the preparations and measures needed to conduct surgery safely on HIV-positive patients, based on our experience. We performed sex reassignment surgery on two HIV-positive patients from January 2013 to January 2015. Both of them were receiving highly active antiretroviral therapy and were asymptomatic, with a normal CD4 count ($>500cells/{\mu}L$). The HIV-RNA was undetectable within the bloodstream. All the staff wore protective clothing, glasses, and three pairs of protective gloves in the operating room because of the possibility of transmission. Prophylactic antibiotics were administered to the patients, and antiviral therapy was performed during their perioperative course. Neither of the patients had postoperative complications, and none of the medical staff experienced accidental exposure. Both patients had satisfactory surgery outcomes without complications. HIV-positive patients can undergo surgery safely without increased risk of postoperative complications or HIV transmission to the staff through the proper use of antibiotics, active antiretroviral therapy, and supplemental protective measures with post-exposure prophylaxis for the staff in case of HIV exposure.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1999년도 추계학술대회 논문집
• /
• pp.383-386
• /
• 1999

The importance of rechargeable lithium cells has been emphasized. So a large variety of materials has been discovered and evaluated for use as reversible cathodes and electroyltes. This paper examines the charge/discharge properties and the charge/discharge cycling life of Li$_2$O-P$_2$O-V$_2$O$_{5}$Li cells. In audition, DTA tests were carried out on Li$_2$O-P$_2$O-V$_2$O$_{5}$ glass. As a result the best performance was achieved when 0.3Li$_2$O-0.1P$_2$O$_{5}$-0.6V$_2$O$_{5}$Li cells was mixed with SP270. that is discharge capacity of 240mAh/g have been achieved. In addition this battery exhibited good cycling performance. Considering these results we expected utilization of the Li$_2$O-P$_2$O-V$_2$O$_{5}$ glass as a cathode material in a secondary battery.y battery.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2009년도 제38회 동계학술대회 초록집
• /
• pp.301-301
• /
• 2010

In order to enhance the efficiency of the organic solar cells, the effects of plasma surface treatment with using $CF_4$ and $O_2$ gas on the anode ITO were studied. The polymer solar cell devices were fabricated on ITO glasses an active layer of P3HT (poly-3-hexylthiophene) and PCBM ([6,6]-phenyl C61-butyric acid methyl ester) mixture, without anode buffer layer, such as PEDOT:PSS layer. The metallic electrode was formed by thermally evaporated Al. Before the coating of organic layers, ITO surface was exposed to plasma made of $CF_4$ and $O_2$ gas, with/without heat treatment. In order to identify the effect the surface treatment, the current density and voltage characteristics were measured by solar simulator and the chemical composition of plasma treated ITO surface was analyzed by using X-ray photoelectron spectroscopy(XPS). In addition, the work function of the plasma treated ITO surface was measured by using ultraviolet photoelectron spectroscopy(UPS). The effects of plasma surface treatment can be attributed to the removal organic contaminants of the ITO surface, to the improvement of contact between ITO and buffer layer, and to the increase of work function of the ITO.