• 전기학회논문지
• /
• 제59권11호
• /
• pp.2073-2082
• /
• 2010

The 4-th generation of mobile communication aims to realize global, fast and mobile communication service. The satellite communication charges a key role in this field. In this study, an OTM(On-The-Move) antenna which is mounted on ground vehicles and is used for mobile communication between vehicle and satellite was addressed. Since vehicles move during communication, active antenna line-of-sight stabilization is a core technology to guarantee high satellite communication quality. Stabilization of a satellite tracking antenna which consists of 2-DOF gimbals, an elevation gimbal over an azimuth gimbal, was considered in this study. Various disturbance torques such as static and dynamic mass imbalance torques, variation of moment of inertia according to elevation angle, friction torque related to vehicle motion, equivalent disturbance torque due to antenna roll motion, etc. were analyzed. As a robust stabilization control, rate feedback with sliding mode control and position feedback with proportional+integral control was suggested. To compensate antenna roll motion, a supplementary roll rate feed forward control was included beside of the feedback control loop. The feasibility of the analysis and the proposed control design were verified along with some simulation results.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2005년도 춘계학술대회 논문집 디스플레이 광소자 분야
• /
• pp.96-99
• /
• 2005

As the demand of internet networks using backbone communication systems recently increased, the researches on the high-speed wideband optical communication systems are required. For high-speed optical communication systems, asymmetric sampled grating distributed feedback laser diodes (DFB-LDs) are developed and the reliability of DFB-LDs is examined. The reliability of DFB-LDs is performed by monitoring I-V and L-I characteristics and two degradation phenomena related to the electrical characteristics of LDs are observed during the life tests. The first degradation phenomenon by increasing the reverse current is considered as a formation of leakage current path enough to prevent lasing operation in lateral blocking layer near active region of lasers. The second degradation phenomenon by decreasing the forward current is considered as activation of non-radiative Auger recombination process by thermal energy and the second degradation phenomenon is recovered after the off-test period at room temperature Eventually, evaluating the reliability of DFB LDs can allow us to improved the manufacturability in high-volume manufacturing.

• 한국소음진동공학회논문집
• /
• 제18권11호
• /
• pp.1185-1191
• /
• 2008

This paper presents an approach to define an optimal piezoactuator length to actively control structural vibration. The optimal ratio of the piezoactuator length against the beam length when a pair of piezoceramic actuator and accelerometer is used to suppress unwanted vibration with direct velocity feedback(DVFB) control strategy is not clearly defined so far. It is well known that DVFB control can be very useful when a pair of sensor and actuator is collocated on structures with a high gain and excellent stability. It is considered that three different collocated Pairs of piezoelectric actuators (20, 50 and 100 mm long) and accelerometers installed on three identical clamped-clamped beams($30{\times}20{\times}1mm$). The response of each sensor-actuator pair requires strictly positive real(SPR) property to apply a high feedback gain. However the length of the piezoactuator affects the SPR property of the sensor-actuator response. Intensive simulation and experiment show the effect of the actuator length variation is strongly related with the frequency range of the SPR property. Thus an optimal length ratio was suggested to obtain relevant performance with a good stability under the DVFB strategy.

• 반도체디스플레이기술학회지
• /
• 제22권4호
• /
• pp.161-165
• /
• 2023

This paper designed a voltage feedback driving circuit to compensate for the characteristic deviation of the Active Matrix Organic Light Emitting Diode driving Thin Film Transistor. This paper describes a stable and fast circuit by applying charge sharing and polar stabilization methods. A 12-inch Organic Light Emitting Diode with a Double Wide Ultra eXtended Graphics Array resolution creates a screen distortion problem for line parasitism, and charge sharing and polar stabilization structures were applied to solve the problem. By applying Charge Sharing, all data lines are shorted at the same time and quickly positioned as the average voltage to advance the compensated change time of the gate voltage in the next operation period. A buffer circuit and a current pass circuit were added to lower the Amplifier resistance connected to the line as a polar stabilization method. The advantage of suppressing the Ringing of the driving Thin Film Transistor can be obtained by increasing the stability. As a result, a circuit was designed to supply a stable current to the Organic Light Emitting Diode even if the characteristic deviation of the driving Thin Film Transistor occurs.

• 한국정보통신학회논문지
• /
• 제17권10호
• /
• pp.2395-2402
• /
• 2013

본 논문에서는 40MHz의 대역폭과 개선된 선형성을 가지는 active-RC channel selection filter (CSF)가 제안된다. 제안되는 CSF는 5차 butterworth 필터로써 한 단의 1차 low pass 필터와 두 단의 biquad 기반의 2차 low pass 필터, 그리고 DC offset 제거를 위한 DC 피드백 회로로 구성된다. CSF의 선형성을 개선하기 위해 스위치로 사용되는 MOSFET의 body를 source 노드로 연결한다. 설계된 CSF의 대역폭은 10MHz, 20MHz, 그리고 40MHz로 선택될 수 있으며, 전압 이득은 0dB에서 24dB까지 6dB의 단위로 조정된다. 제안된 CSF는 1.2V 40nm의 1-poly 8-metal CMOS 공정에서 설계된다. 설계된 CSF가 40MHz의 대역폭과 0dB의 gain을 가질 때, OIP3는 31.33dBm이고 in-band ripple은 1.046dB, IRN는 39.81nV/sqrt(Hz)로 시뮬레이션 검증되었다. CSF의 면적과 전력소모는 각각 $450{\times}210{\mu}m^2$와 6.71mW 이다.

• 한국산학기술학회논문지
• /
• 제20권3호
• /
• pp.570-575
• /
• 2019

능동 머플러는 자동차 머플러의 배기소음을 저감하기 위하여 능동 소음 제어 기법을 적용하여 구현된다. 기존의 보편적인 Filtered_x LMS 알고리즘은 음향 궤환이 존재할 경우 제어필터의 차수가 매우 커지고 수렴성이 악화되는 문제가 있다. 이를 보완할 수 있는 Recursive LMS 알고리즘은 적응필터의 적응과정에서 쉽게 발산할 수 있어 적용이 제한되어 왔다. 본 논문에서는 수렴 성능과 계산량 부담이 개선되도록 1차 경로와 2차 경로 전달함수의 구조를 IIR 필터로 설계하였으며 IIR 필터 구조의 단점인 안정성 확보를 위해 안정화 필터 알고리즘을 적용하였다. 안정화 필터 알고리즘은 적응과정 중에 음향 궤환에 해당하는 전달함수의 극점이 발산하는 것을 방지하기 위하여 극점을 단위원 내부로 끌어 당기는 역할을 수행한다. 이러한 방법으로 능동 머플러 시스템의 계산량 절감과 수렴성능을 향상시킬 수 있다. 제안한 시스템의 유용성을 보이기 위하여 가변 환경인 디젤 엔진의 배기음향을 대상으로 기존의 Filtered_x LMS 알고리즘과 제안한 시스템과의 성능을 비교하여 그 우수성을 보였으며, 계산량은 절반 이하, 수렴 특성은 4배 이상의 성능을 보였다.

• ETRI Journal
• /
• 제25권3호
• /
• pp.149-155
• /
• 2003

A self-pulsating multisection distributed-feedback laser diode (DFB LD) can potentially realize all-optical clock extraction. This device generally consists of three sections, two DFB sections and one waveguide section. The most important variable in this device is detuning, which is the relative spectral position between the stop bands of two DFB sections. We fabricated a novel structure in which two gratings were located one over and one under the active layers. Each grating structure was independently defined in processing so that detuning, which is the prerequisite for self-pulsation, could be easily controlled. Observing various self-pulsating phenomena in these devices under several detuning conditions, we characterized the phenomena as dispersive Q-switching, mode beating, and self-mode-locking.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2005년도 춘계학술대회논문집
• /
• pp.494-497
• /
• 2005

Direct velocity feedback (DVFB) control with a collocated distributed actuator and point sensor pair is known that it offers a good stability with high performance when the control strategy is applied at the suppression of structural vibration. Also decentralized control method introduced to offer to reduce implementaion effort and malfunction due to failure in sensors and actuators of control system has become an important position in DVFB. In this paper, the decentralized control is compared with centralized control in terms of vibrational velocity reduction in a clamped-clamped beam.

• 한국공작기계학회논문집
• /
• 제14권3호
• /
• pp.32-37
• /
• 2005

Several types of smart materials and control scheme are available to adjust the structure actively in various external disturbances. A control scheme was introduced for a specific material. But the effectiveness of the control scheme has some limitation according to the choice of the smart materials and the response of the structure. The ER(Electrorheological) fluid is adequate for a large control force, and the PZT(lead zirconate titanate) patches are suitable for small but arbitrary control force at any point of the structure. It can be used for active control of structure by changing the dynamic characteristics of the structure. But it has some difficulty in suppressing the excited vibration in broad band. To compensate this resonance of the controlled structure, a hybrid controller was constructed using PPF(Positive position feedback) control with PZT and ER fluid control.

• 천문학회보
• /
• 제41권2호
• /
• pp.29.5-30
• /
• 2016

(1) The correlation between the mass of supermassive black holes (SMBHs) and the properties of their host galaxies suggests that SMBHs and host galaxies are closely linked in their formation and evolution. While the exact origin of their relationship is still under debate, theoretical models often invoke feedback from active galactic nuclei as a crucial mechanism for establishing the BH-host correlation. In the first part of my talk, I will present our efforts to find observational sign of the AGN feedback in young luminous AGNs. (2) While intermediate-mass black hole (IMBH) is thought be cosmologically important class to understand the link between stellar mass black holes and SMBHs, it is extremely rare in the present-day Universe. In the second part of this talk, I will report a Gemini/GMOS-N IFU study of an ultraluminous X-ray source in NGC 5252, which is a possible candidate of an off-nuclear non-stellar black hole.