• Archives of Pharmacal Research
• /
• 제24권3호
• /
• pp.229-233
• /
• 2001

This Paper deals with the development of a technology for making a hydrophilic gel of Polyethylene oxide reception in which radiating ability is employed to cause cross-linking of Polymers in a water solution. The gel of polyethylene oxide was shown to be nontoxic contain 5-50% of polymer and be useful in composite medicinal forms along with biologically active substances including Bac. subtilis proteases. Proteases immobilized in the gel possess high thermal stability and proteolytic activity and are readily applied in medicine. The effect of immobilized proteolytic and glucolytic enzymes of Bac. subtillis (Immozimase) on the warm ischemia-reperfusion (I/R) which can cause hepatic and jejunum injury was also studied. These enzymes were immobilized on water-soluble polymer polyethylene glycol by means of an electron beam. The number of degraanulated mast cells as well as serum ALT after I/R in the group with Immozimase was decreased to almost half as compared with the control group. Pretreatment with Immozimase resulted in significant reduction of hepatic and gut neutrophil accumulation as compared with control animals. It was concluded that Immozimase has a protective effect for hepatic and gut ischemia/reperfusion, and this effect seems to be associated with prevention of leukocyte accumulation .

• 토지주택연구
• /
• 제2권4호
• /
• pp.407-413
• /
• 2011

본 논문에서는 콘크리트 보의 표면에 부착된 CFRP (Carbon Fiber Reinforced Plastic) 보강재의 박리 손상 진단을 위한 구조 건전성 모니터링 기법을 소개한다. 이를 위해 압전 능동 센서를 이용한 셀프센싱 회로 기반의 다중 스케일 계측 기법이 적용되었다. 다중 스케일 계측 시스템으로부터 셀프센싱 임피던스 계측을 통한 주파수 영역 구조 응답 및 셀프센싱 유도 초음파 계측을 통한 특정 주파수에서의 구조 응답을 획득할 수 있다. 박리 손상의 정량화를 위하여 임피던스 및 유도 초음파 신호로부터 추출된 손상 특성을 이용하여 2차원 손상 지수를 도출하고 이를 지도학습 기반 확률론적 패턴인식 기법에 적용하였다.

• Journal of Periodontal and Implant Science
• /
• 제50권6호
• /
• pp.418-434
• /
• 2020

Purpose: The purpose of the present study was to evaluate the effect of silica-calcium phosphate composite (SCPC) granules on bone regeneration in extraction sockets. Methods: Ten patients were selected for a split-model study. In each patient, bone healing in SCPC-grafted and control ungrafted sockets was analyzed through clinical, radiographic, histomorphometric, and immunohistochemical assessments 6 months postoperatively. Results: A radiographic assessment using cone-beam computed tomography showed minimal ridge dimension changes in SCPC-grafted sockets, with 0.39 mm and 1.79 mm decreases in height and width, respectively. Core bone biopsy samples were obtained 6 months post-extraction during implant placement and analyzed. The average percent areas occupied by mature bone, woven bone, and remnant particles in the SCPC-grafted sockets were 41.3%±12%, 20.1%±9.5%, and 5.3%±4.4%, respectively. The percent areas of mature bone and woven bone formed in the control ungrafted sockets at the same time point were 31%±14% and 24.1%±9.4%, respectively. Histochemical and immunohistochemical analyses showed dense mineralized bundles of type I collagen with high osteopontin expression intensity in the grafted sockets. The newly formed bone was well vascularized, with numerous active osteoblasts, Haversian systems, and osteocytes indicating maturation. In contrast, the new bone in the control ungrafted sockets was immature, rich in type III collagen, and had a low osteocyte density. Conclusions: The resorption of SCPC granules in 6 months was coordinated with better new bone formation than was observed in untreated sockets. SCPC is a resorbable bone graft material that enhances bone formation and maturation through its stimulatory effect on bone cell function.

• 센서학회지
• /
• 제28권3호
• /
• pp.157-163
• /
• 2019

The LiDAR sensor, which is widely regarded as one of the most important sensors, has recently undergone active commercialization owing to the significant growth in the production of ADAS and autonomous vehicle components. The LiDAR sensor technology involves radiating a laser beam at a particular angle and acquiring a three-dimensional image by measuring the lapsed time of the laser beam that has returned after being reflected. The LiDAR sensor has been incorporated and utilized in various devices such as drones and robots. This study focuses on object detection and recognition by employing sensor fusion. Object detection and recognition can be executed as a single function by incorporating sensors capable of recognition, such as image sensors, optical sensors, and propagation sensors. However, a single sensor has limitations with respect to object detection and recognition, and such limitations can be overcome by employing multiple sensors. In this paper, the performance of an eight-channel scanning LiDAR was evaluated and an object detection algorithm based on it was implemented. Furthermore, object detection characteristics during daytime and nighttime in a real road environment were verified. Obtained experimental results corroborate that an excellent detection performance of 92.87% can be achieved.

• The Journal of Advanced Prosthodontics
• /
• 제14권3호
• /
• pp.143-149
• /
• 2022

PURPOSE. Masticatory loading triggers active bone remodeling, altering alveolar bone mineral density (BMD). While dental implants are placed to bear masticatory loading, their influence on changing bone properties has not been fully investigated. Objective of this pilot study was to examine whether the dental implantation has an effect on BMD distribution of bone by comparing dentate, edentulous, and edentulous patients with implants. MATERIALS AND METHODS. Cone beam computed tomography (CBCT) images of 19 partially edentulous patients (Dent), 19 edentulous patients (Edent), and 16 edentulous patients who received implants in the mandible (Edent+Im), were obtained. CBCT images were also obtained from 5 patients within Edent+Im group, before implant placement and after implant loading. Basal cortical bone region of the mandible was digitally isolated. A histogram of gray levels proportional to BMD was obtained to assess mean, histogram standard deviation (HSD), fifth percentile of low and high values (Low₅ and High₅) of the BMD distribution. Multivariate analysis of variance and paired t-test were used to compare the BMD parameters among the 3 dental status groups and between pre- and post-implantation, respectively. RESULTS. Edentulous patients with implants had significantly greater HSD and High₅ values compared to edentulous patients (P < .013). All other comparisons were not significant (P > .097). Mean, HSD, and High₅ values significantly increased after receiving implants (P < .022). CONCLUSION. The current findings suggested that receiving dental implants promoted oral bone mineralization for edentulous patients. The longitudinal investigation could provide valuable information on understanding the effects of implantation on the behavior of oral bone quality.

• 전기전자학회논문지
• /
• 제26권2호
• /
• pp.211-218
• /
• 2022

본 논문에서는 저궤도 위성 원격측정데이터 신호 수신을 위한 S-대역 위상배열안테나를 제안하였다. 제안된 안테나는 16개의 부배열 조립체, 16개의 능동회로모듈, 수직 급전회로망 및 제어/전원반으로 구성되며 고각 방향으로 빔틸트가 수행된다. 개발된 안테나는 고각 축과 위성 궤적을 일치시키고 개구 중심을 위성 궤적 상의 최대 고각을 바라보도록 하여 정밀한 위성 추적을 수행하였다. 저궤도 위성의 궤적은 위성점 계산을 통하여 정확하게 산출하였다. 위성 추적 시험은 최대 고각을 기준으로 ±30° 범위에서 수행되였다. 위성 추적 시험 결과 최대 고각에서의 S/N비는 16.5 dB이고 Eb/No는 13.3 dB를 얻었다. 수행된 위성 추적 결과는 사전 시스템 분석 결과와 잘 일치함을 확인하였다.

• Journal of Periodontal and Implant Science
• /
• 제53권5호
• /
• pp.388-401
• /
• 2023

Purpose: This study investigated the accuracy of free-hand implant surgery performed by an experienced operator compared to static guided implant surgery performed by an inexperienced operator on an anterior maxillary dental model arch. Methods: A maxillary dental model with missing teeth (No. 11, 22, and 23) was used for this in vitro study. An intraoral scan was performed on the model, with the resulting digital impression exported as a stereolithography file. Next, a cone-beam computed tomography (CBCT) scan was performed, with the resulting image exported as a Digital Imaging and Communications in Medicine file. Both files were imported into the RealGUIDE 5.0 dental implant planning software. Active Bio implants were selected to place into the model. A single stereolithographic 3-dimensional surgical guide was printed for all cases. Ten clinicians, divided into 2 groups, placed a total of 60 implants in 20 acrylic resin maxillary models. Due to the small sample size, the Mann-Whitney test was used to analyze mean values in the 2 groups. Statistical analyses were performed using SAS version 9.4. Results: The accuracy of implant placement using a surgical guide was significantly higher than that of free-hand implantation. The mean difference between the planned and actual implant positions at the apex was 0.68 mm for the experienced group using the free-hand technique and 0.14 mm for the non-experienced group using the surgical guide technique (P=0.019). At the top of the implant, the mean difference was 1.04 mm for the experienced group using the free-hand technique and 0.52 mm for the non-experienced group using the surgical guide technique (P=0.044). Conclusions: The data from this study will provide valuable insights for future studies, since in vitro studies should be conducted extensively in advance of retrospective or prospective studies to avoid burdening patients unnecessarily.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2008년도 International Meeting on Information Display
• /
• pp.1261-1262
• /
• 2008

Laser-based crystallization techniques are ideally-suited for forming high-quality crystalline Si films on active-matrix display backplanes, because the highly-localized energy deposition allows for transformation of the as-deposited a-Si without damaging high-temperature-intolerant glass and plastic substrates. However, certain significant and non-trivial attributes must be satisfied for a particular method and implementation to be considered manufacturing-worthy. The crystallization process step must yield a Si microstructure that permits fabrication of thin-film transistors with sufficient uniformity and performance for the intended application and, the realization and implementation of the method must meet specific requirements of viability, robustness and economy in order to be accepted in mass production environments. In recent years, Low Temperature Polycrystalline Silicon (LTPS) has demonstrated its advantages through successful implementation in the application spaces that include highly-integrated active-matrix liquid-crystal displays (AMLCDs), cost competitive AMLCDs, and most recently, active-matrix organic light-emitting diode displays (AMOLEDs). In the mobile display market segment, LTPS continues to gain market share, as consumers demand mobile devices with higher display performance, longer battery life and reduced form factor. LTPS-based mobile displays have clearly demonstrated significant advantages in this regard. While the benefits of LTPS for mobile phones are well recognized, other mobile electronic applications such as portable multimedia players, tablet computers, ultra-mobile personal computers and notebook computers also stand to benefit from the performance and potential cost advantages offered by LTPS. Recently, significant efforts have been made to enable robust and cost-effective LTPS backplane manufacturing for AMOLED displays. The majority of the technical focus has been placed on ensuring the formation of extremely uniform poly-Si films. Although current commercially available AMOLED displays are aimed primarily at mobile applications, it is expected that continued development of the technology will soon lead to larger display sizes. Since LTPS backplanes are essentially required for AMOLED displays, LTPS manufacturing technology must be ready to scale the high degree of uniformity beyond the small and medium displays sizes. It is imperative for the manufacturers of LTPS crystallization equipment to ensure that the widespread adoption of the technology is not hindered by limitations of performance, uniformity or display size. In our presentation, we plan to present the state of the art in light sources and beam delivery systems used in high-volume manufacturing laser crystallization equipment. We will show that excimer-laser-based crystallization technologies are currently meeting the stringent requirements of AMOLED display fabrication, and are well positioned to meet the future demands for manufacturing these displays as well.

• 대한전자공학회논문지
• /
• 제18권4호
• /
• pp.21-26
• /
• 1981

전자선 가열 증착장치를 사용하여, 결정면이 (100)이고 비저항이 2∼4(Ω·cm) 인 N형 Si단결정기판 위에 10∼20A정도의 얇은 절연층을 형성하고, 이 위에 약 1000A의 SnO2 또는 ITO를 증착시켜 SIS 태양전지를 만들고, 이들의 특성을 조사하였다. 절연 산화피막형성을 위한 가장 적합한 온도 및 시간은 공기중에서 각각 500℃ 및 5분이었다. SnO2나 ITO를 Si 기관위에 증착한 후, 공기중에서 행한 열처리 조건은, SnO2/n-Si 태양전지의 경우 300℃에서 10분간이고, ITO/n-Si 태양전지의 경우는 300℃, 20분이 적합함을 알 수 있었다. AMI(100mW/㎠) 상태에서 측정한 SnO2/n-Si 태양전지의 개방전압(Voc), 단락전류(Jsc), 충실도(FF) 및 효율(η)은 각각 0.4V, 34mA/㎠, 0.44 및 6.0%(활성영역 효율, 6.9%)이었고, ITO/n-Si 태양전지의 경우는 각각 0.44V, 36mA/㎠, 0.53 및 8.45%(활성영역 효율, 9.71%)였다.

• 한국전자파학회논문지
• /
• 제21권8호
• /
• pp.872-879
• /
• 2010

본 논문은 차량 번호판용 RFID 태그 안테나의 인식 거리를 향상시키기 위한 최적 지향성 설계에 대해서 기술하고 있다. 제안된 수동형 안테나의 지향성 패턴은 미앤더 선로의 위치와 태그 안테나가 부착되는 범퍼의 크기에 의해 결정된다. 계산된 지향성 패턴과 인식 거리의 타당성을 입증하기 위하여 태그 안테나를 제작하고 전파 암실에서 측정을 행하였다. 능동형과 수동형 안테나의 측정된 방사 패턴의 최대 지향성 이득은 각각 2.32 dBi와 3.1 dBi로 관측되었다. 수동형 태그 안테나의 최대 인식 거리는 차량 진행 방향(방위각 $0^{\circ}$)을 기준으로 ${\pm}45^{\circ}$의 빔 방향에서 약 8.5 m로 측정되었다.