• Elastomers and Composites
• /
• v.44 no.2
• /
• pp.175-181
• /
• 2009

The solution polymerization was conducted to synthesize pressure sensitive adhesive for polarizer film using acrylic monomers. 2-Ethylhexyl acrylate, butyl acrylate, acrylic acid were used as acrylic monomers, benzoyl peroxide as initiator, ethyl acetate as solvent. The ratio of monomers was 2-ethylhexyl acrylate: butyl acrylate: acrylic acid = 25:50:3.6 reflecting $-40^{\circ}C$ of glass transition temperature in the pressure sensitive adhesive. The amount of initiator was determined as 0.09% to monomer considering wetting power and initial tackiness. The ratio of monomer to solvent was determined as 1:1.7 considering wetting power and transmissivity. The transmissivity of pressure sensitive adhesive increased with decreasing both viscosity and molecular weight due to reducing of refractive index by low entanglement between molecules. In the measurement of pot life, it was found that the storage stability was good at 1:1.7 of monomer: solvent without large change of viscosity during 200 min.

• Elastomers and Composites
• /
• v.53 no.3
• /
• pp.150-157
• /
• 2018

Fatigue properties of rubber are one of the most important characteristics in the rubber industry. In this study, the fatigue properties of MREs (magneto-rheological elastomers) based on NR (natural rubber), EPDM (ethylene-propylene diene monomer), and AEM (ethylene/acrylic elastomer) were investigated. For comparison, MREs with a Shore hardness of 60A were prepared. According to the relative results, the fatigue properties of EPDM MRE were the worst. Thus, we investigated methods to improve the fatigue properties of EPDM MRE by varying the carbon black content and curing systems of EPDM as the matrix of the MRE. Dynamic properties were measured using a fatigue tester and an RPA (rubber process analyzer), and the XPS (X-ray photoelectron spectroscopy) was used to analyze the curing system of the EPDM matrix. According to the results, the Payne effect increased and the fatigue resistance decreased as the carbon black content increased. In case of the curing system, the CV (conventional vulcanization) system was superior to the EV (efficient vulcanization) system in terms of the fatigue resistance. This was because the number of flexible bonds in the case of the CV system was higher than that in the case of the EV system. However, the EV system showed excellent mechanical properties because it had many monosulfidic bonds with strong binding energy.

• Elastomers and Composites
• /
• v.14 no.2
• /
• pp.83-102
• /
• 1979

The purpose of this dissertation is to study some of the vulcanization characteristics of rubber-bound antioxidants such as G-1, [N-(3-methacryloyloxy-2-hydroxypropyl)-N'-phenyl-p-phenylene diamine] and acryl, acrylamide & acrylester substituted hindered phenols. The influence of these antioxidants upon vulcanization characteristics in NR and SBR compounds in the presence of vulcanizing accelerators such as MSA, TT, DM, M & D was evaluated by means of Oscillationg Disk Cure Meter. The comparison was also made between the influence of rubber-bound antioxidants and that of conventional non-reactive antioxidants such as N-alkyl substituted PADA series. Regarding the influence of reactive type antioxidant G-1 mixed with accelerator TT upon vulcanization characteristics, rapid onset of vulcanization and higher degree of cross-linking were discovered, whereas in the case of accelerator M and DM, the result was slow onset of vulcanization and lesser degree of cross-linking. The comparison of vulcanizing characteristics among acrylic substituted hindered phenols as antioxidants was made under several vulcanization accelerator systems. Under such systems, MSA-S combined accelerator caused the onset of vulcanization to slow down and lowered the degree of cross-linking. Finally in the case of hindered phenol derivatives containing longer substituent, the delayed onset of vulcanization and the lowered degree of cross-linking could be discerned.

• Elastomers and Composites
• /
• v.45 no.4
• /
• pp.272-279
• /
• 2010

Starch is an environmental-friendly natural source, more interests are attracted to use starch for synthesis of composites and coating sols. Starch-acrylic coating sols for architectural materials were synthesized by emulsion polymerization. The structures of synthesized materials were characterized by using Infrared spectra, $^1H$-NMR spectra, and physical characteristics were investigated by X-ray diffraction, foaming test, whiteness test, gloss test and tensile strength test. XRD results showed that starch in starch-acrylic copolymer matrix was in an amorphous state. Starch-acrylic emulsion was compounded with 1%, 3%, 5% foaming agent (n-pentane) and 60% $CaCO_3$ solution. The results showed that starch and foaming agent could increase the foamability. Tensile strength increased with the enhancement of starch and foaming agent concentration. But whiteness and gloss decreased with increase of starch and foaming agent concentration.

• Elastomers and Composites
• /
• v.43 no.4
• /
• pp.221-229
• /
• 2008

Starch as matrix polymer was used to do graft copolymerization with 2-ethylhexylacrylate, methyl methacrylate and acrylic acid. The polymerization was carried out by radical emulsion polymerization with increasing contents of starch. When 0.174% of $\alpha$-amylase as enzyme for starch was added, it was found that it made the best stable emulsion. The glass transion temperature of the polymerized material was increased with starch contents. The particle size and viscosity of the emulsion increased with starch contents due to the increased hydroxy group. Peel strength also increased with contents of starch because the enhanced hydroxy group caused to increase affinity between substrate surface and polymer materials. However, the initial tackiness decreased with starch contents owing to film hardness by higher glass transion temperature.

• Elastomers and Composites
• /
• v.12 no.1
• /
• pp.55-64
• /
• 1977

ethylene과 methylacrylate 그리고 가교(架橋) 영향(影響)을 미치는 Carboxyl 기(基)로 구성(構成)되어 있는 이 공중합체(共重合體)는 내열(耐熱) 그리고 내유성(耐油性)인 새로운 등급(等級)의 탄성체(彈性體로) 상품화(商品化) 되었다. 이 탄성체(彈性體)의 가황물(加黃物)은 Chlorosulfonated Polyethylene과 실리콘고무 중간(中間)인 고온(高溫)에서 물리적(物理的) 특성(特性)을 만족(滿足)시켜주는 고무로써 특(特)히 내유(耐油), 내(耐)오존성(性) 그리고 내후성(耐侯性)에 우수하며 동시(同時)에 저온(低溫)에서도 훌륭한 성질(性質)을 유지(維持)하는 탄성체(彈性體)이다.

• Journal of Technologic Dentistry
• /
• v.14 no.1
• /
• pp.133-138
• /
• 1992

The base of a metal base denture that is made of acrylic resin base and metal in lined by soft liner named silicon rubber and its merits are as follows. 1. It has a good retention and fastness. 2. It has a good comfort and stability. 3. It is easy to mix various kinds of base materials. 4. It is easy to repair. 5. The pressure of bone and mucosal tissue is decreased and bite force is dispersed.

• Elastomers and Composites
• /
• v.36 no.3
• /
• pp.195-200
• /
• 2001

Ultraviolet photografting of acrylic acid onto low density polyethylene was characterized using XPS and contact angle measurement. Effects of surface modification at LDPE and aluminum on LDPE/Al laminate were also investigated. Contact angle decreased significantly at initial state arid tends to level off with increasing UV irradiation time. The improvement of hydrophilicity was due to the presence of acrylic acid on LDPE surface. Graft of acrylic acid onto LDPE was also identified from O1s/C1s ratios in XPS spectrum. Adhesion strength of LDPE-g-AAc/Al laminate showed about 30 times higher than LDPE/A1 system and it could be attributed to the increase of polarity of LDPE surface. Chemical treatment of Al surface using sulfuric acid/sodium dichromate also increased the adhesion strength of LDPE/Al laminate. Adhesion strength of LDPE/Al laminate decreased significantly under acetic acid.

• Clean Technology
• /
• v.15 no.3
• /
• pp.180-185
• /
• 2009

The ethylene-propylene rubber (EPDM) scrap generated from automobile weatherstrip manufacturing process was used to make a thermoplastic elastomer through blending with polypropylene. The surface activated EPDM powder was obtained by the high temperature and shear pulverizer. The addition of surfactant resulted in more surface activated EPDM powder and the optimum loading amounts of surfactant was 1.5 phr. Maleic anhydride was grafted onto polypropylene by reactive blending to give functionalized polypropylene. The wetting property between EPDM scrap and polypropylene was improved by the addition of poly (ethylene-co-acrylic acid) as a compatibilizing agent. Poly(ethylene-co-acrylic acid) decreased the surface tension of polypropylene and thus would contribute to the wettability with EPDM powder.

• Polymer(Korea)
• /
• v.29 no.2
• /
• pp.156-160
• /
• 2005

$\alpha,\omega-Vinyl$ poly (dimethyl-methylphenyl) siloxane prepolymer (VPMPS ) was prepared by the equilibrium polymerization of octamethylcyclotetrasiloxane $(D_4)$, 1,3,5-trimethyl-1,3,5-triphenylcyclotrisiloxane $(D_3^{Me,Ph)$, and 1,1,3,3-tetramethyl-1,3-divinyldisiloxane (MVS). And also, of $\alpha,\omega-hydrogen$ poly(dimethyl-methyl)siloxane prepolymer (HPDMS) as end blocker was prepared from octamethylcyclotetrasiloxane $(D_4)$, 1,3,5-trimethylcyclotrisiloxane $(D_3^:Me,H})$, and 1,1,3,3-tetramethyldisiloxane (MS). Nickel ferrite nanoparticles having spinel magnetic material was prepared by the sol-gel method using PAA as a chelating agent. Poly(organosiloxane) rubber nanocomposite containing silica and nickel ferrite ultrafine powder modified with 1,3-divinyltetramethyldisilazane (VMS) was prepared by compounding VPMPS, HPDMS, and catalyst in high speed dissolver. The mechanical properties, heat dissipating away characteristics, and volume resistivities for POX-30 and POX-50 were measured.