• 벤처혁신연구
• /
• 제6권4호
• /
• pp.113-131
• /
• 2023

인수합병 후 통합(post-merger integration; PMI)이 M&A 성공에 있어 매우 중요한 역할을 담당하고 있다. 따라서 본 연구는 PMI에 대한 선행 연구들을 바탕으로 PMI 과정에서 피인수기업 구성원에 대한 의사소통과 '인식된 불확실성 감소', '조직만족도' 그리고 '조직신뢰' 간의 관계를 살펴보고 인수기업과 피인수기업 간의 '사업영역의 일치도'의 조절 효과를 중심으로 조사하고자 한다. 본 연구는 연구목적을 달성하기 위하여 각 변수 간의 관계에 대한 가설을 설정하고 실증분석을 진행하였다. 자료는 중국 내에 인수 기업에서 근무하는 피인수기업의 구성원을 대상으로 설문조사를 실시하여 최종 317개 설문지를 수집하였고 실증분석을 실시하였다. 연구 결과, 의사소통은 피인수기업 구성원들이 인식한 불확실성 감소, 직무만족도 그리고 조직신뢰에 긍정적인 영향을 미친다는 것과 인수기업과 피인수기업 간의 사업영역의 일치도는 의사소통과 '인식된 불확실성' 간의 관계를 약화시킨다는 것을 확인하였다. 의사소통과 직무만족도 및 조직신뢰 간의 긍정적인 관계에서 조절변수가 강화시키는 효과가 확인되지 않고, 오히려 약화시키는 조절효과를 밝혀냈다. 이러한 연구 결과를 토대로 본 연구는 PMI 과정에서 피인수기업 구성원들과의 의사소통 전략은 통합의 성패에 의미를 가지며, M&A 유형에 따른 차별화된 인적자원관리 방안에 대한 제시와 같은 실무적인 시사점을 제시하였다.

• 제어로봇시스템학회논문지
• /
• 제4권2호
• /
• pp.246-255
• /
• 1998

This paper presents a novel method for real-time malfunction detection of plasma etching process using EPD signal traces. First, many reference EPD signal traces are collected using monochromator and data acquisition system in normal etching processes. Critical points are defined by applying differentiation and zero-crossing method to the collected reference signal traces. Critical parameters such as intensity, slope, time, peak, overshoot, etc., determined by critical points, and frame attributes transformed signal-to symbol of reference signal traces are saved. Also, UCL(Upper Control Limit) and LCL(Lower Control Limit) are obtained by mean and standard deviation of critical parameters. Then, test EPD signal traces are collected in the actual processes, and frame attributes and critical parameters are obtained using the above mentioned method. Process malfunctions are detected in real-time by applying SPC(Statistical Process Control) method to critical parameters. the Real-time malfunction detection method presented in this paper was applied to actual processes and the results indicated that it was proved to be able to supplement disadvantages of existing quality control check inspecting or testing random-selected devices and detect process malfunctions correctly in real-time.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2003년도 ICCAS
• /
• pp.1727-1731
• /
• 2003

In this paper we proposed backward fuzzy Petri-net to diagnoses faults in power systems by using the time sequence information of protection system. As the complexity of power systems increases, especially in the case of multiple faults or incorrect operation of protective devices, fault diagnosis requires new and systematic methods to the reasoning process, which improves both its accuracy and its efficiency. The fuzzy Petri-net models of protection system are composed of the operating process of protective devices and the fault diagnosis process. Fault diagnosis model, which makes use of the nature of fuzzy Petri-net, is developed to overcome the drawbacks of methods that depend on operator knowledge. The proposed method can reduce processing time and increase accuracy when compared with the traditional methods. And also this method covers online processing of real-time data from SCADA (Supervisory Control and Data Acquisition)

• 한국CDE학회논문집
• /
• 제18권2호
• /
• pp.104-112
• /
• 2013

Computer-based modeling and simulation (M&S) techniques have become an essential component in the development of new weapons systems. M&S techniques provide a means to simulate military training, strategies, military doctrines, and weapons acquisition processes. This paper proposes a small scale engagement scenario generation method. This work also includes a process for scenario generation and visualization. The proposed scenario generation methodology employs the Timed-FSA (finite state automata) and DFS (depth first search) algorithms. The proposed scenario generation method is verified using a one-on-one combat engagement scenario between two submarines. In addition, we suggest a scenario generation process including whole scenario generation and scenario visualization.

• 대한기계학회논문집
• /
• 제17권9호
• /
• pp.2214-2222
• /
• 1993

With the use of the NC machine tool, the unmanned production system has been growing recently in the manufacturing field. This there are problems with monitoring adequate tool fracture during the cutting process efficiently. This study was planned and carried out to discover a way of monitoring tool condition in NO-LINE systems during the cutting process. The acquisition of data in cutting force and tool wear has been made in the section examined, to extract the RMS value of the cutting force as specific factors in the cutting process. The fluctuation of the RMS characteristics. From the results, it has been shown that the fluctuation of the RMS values for the cutting force has a close relation to flank wear.

• 전기학회논문지
• /
• 제63권3호
• /
• pp.418-424
• /
• 2014

A large number of wire rope has been used in various industries such as cranes and elevators. When wire used for a long time, wire defects occur such as disconnection and wear. It leads to an accident and damage to life and property. To prevent this accident, we proposed a wire rope fault detection system in this paper. We constructed the whole system choosing the leakage fault detection method using hall sensors and the method is simple and easy maintenance characteristics. Fault diagnosis and analysis were available through analog filter and amplification process. The amplified signal is transmitted to the computer through the data acquisition system. This signal could be obtained improved results through the digital filter process.

• 지식경영연구
• /
• 제5권2호
• /
• pp.53-65
• /
• 2004

Organizations continue to invest heavily in the acquisition of knowledge management systems (KMS). The overriding belief is that KMS-task fit will become more productive. A survey of users was conducted to better understand the factors that affect KMS-task fit to better explain KMS performance perspective on knowledge circulation process. This involves stating the research hypotheses among the following constructs: the characteristics of KMS, the fitness of task characteristics, and KMS performance. The findings indicate that the characteristics of KMS positively affect the fitness of task characteristics. The fitness of task characteristics are affecting KMS performance. The results of this study suggest that task-technology fit could be the basis for a strong diagnostic tool to evaluate whether KMS in a given organization are meeting user needs.

• 산업경영시스템학회지
• /
• 제2권2호
• /
• pp.1-4
• /
• 1979

In order to cope with the violent environment of surrounding enterprises, development of new products, advance to other industry field, unification or abolition of factories and rationlization of labor are needed. But production process being made quality and using process after shipment are the things that we have to think about, first of all and to practice always. Insurance problem of reliability, that is, the positive quality maintenance that has being presented many debate issues recently, will be studied. The accident of nuclear power-plant in America, in connection with reliability maintenance and human engineering, will be analyzed. But as its accident details is not announced, in this study, it is a sort of method of methodology to be studied this paper rather than studying the fact of the accident. Therefore this study will be done as follows, For reliability study. 1. Investigation of problems. 2. Quality maintenance activity and reliability maintenance activity 3. Reliability acquisition in production process, 4. Reliability maintenance after shipment. 5. Conclusion. In addition to stating above, it is sure that liberalization of trade, interchange between nations and strengthening of international competition ability, etc. need high quality. But possibility that quality maintenance or reliability aquisition needs understanding and cooperation of consumer, will be stated.

• 한국가시화정보학회지
• /
• 제8권4호
• /
• pp.48-53
• /
• 2010

Water-uptake through roots, is an essential process of the water flow in plants. Its visualization is very useful for understanding sap flow dynamics at whole plant level. In this study, the tips of Arabidopsis' root hairs were excised and exposed to repeated dehydration and rehydration processes. The water-refilling through individual xylem vessels was visualized using the synchrotron X-ray micro-imaging technique. The high temporal resolution ($2\;{\mu}m$) and beam intensity of the X-ray source allowed to acquisition of consecutive X-ray images of the water-refilling process up to 10 frames/sec. Various flow patterns were observed and the ascending speed of the water-air interfaces was analyzed. The relation between the water-rising height and ascending speed was also analyzed. The present results would provide better alternative for investigating sap flows in roots.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1996년도 추계학술대회 논문집
• /
• pp.841-845
• /
• 1996

Reverse engineering enables a fast creation of CAD model from an existing part without any technical drawing or digital data. This method of data acquisition is necessary in several industrial applications when the modification of an existing product design has to be performed and verified afterwards. In this paper, the surface of an existing ship propeller was measured by a tactile measuring system and the acquired point data of the surface were used for modeling of a solid model in CAD system. By using LOM and casting processes, an aluminum propeller for functional test was manufactured and then its accuracy was measured by a laser scanner and compared with the origin릴 CAD data. As the results show, the use of LOM as a rapid prototyping process and casting as a secondary process delivers a functional prototype propeller which can be used for test purposes.