• Transactions of the Korean Society of Automotive Engineers
• /
• v.2 no.6
• /
• pp.110-116
• /
• 1994

In this research, the tensile strength of molded parts and pressure distribution were analyzed to study the cavity filling stage and packing stage in injection molding. The measurement of cavity pressure was obtained by a data acquisition system with the installation of transducers in the cavity. Molded parts were tested by a universal testing machine to obtain the tensile strength. For the experimental work, the tensile strength of molded parts increased with longer packing time and exact freezing time of the gate was obtained by a cavity pressure curve. In addition, the effect of packing did not occur and tensile strength was almost constant after early 1.5 sec of the freezing time of gate. Density tended to be higher about 0.2% due to a larger degree of mold temperature and melt temperature. Also, changing pressure in the cavity was effectively sensed. Thereafter, the possibility of the development of pattern recognition expert system was confirmed on the basis of the experimental results.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.53 no.3
• /
• pp.168-174
• /
• 2004

On-line monitoring system(OMS) has been developed for the pumped storage generator/motor The OMS is applied to diagnosis of the PD(partial discharge) activity of stator insulation, the shorted-turn of rotor winding and the variation of the air-gap between stator and rotor. The OMS consists of DAS(data acquisition system), main server system, gateway and display PC. The DAS measures the PD, the shorted-turn and air-gap from three sensors installed on the generator/motor. The gateway controls the data which sent by DAS. The main server system saves the data, analyzes the data and conducts the diagnostic algorithm. The display PC shows the diagnostic results of partial discharge, shorted-turn and air-gap. Field tests were conducted using PDA(partial discharge analyzer). The results of the OMS and PDA measurements can be directly correlated with normalized quantity number(NQN), PD magnitude(Qm) and PD pattern.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2002.10a
• /
• pp.421-424
• /
• 2002

The 3-D measurement using a sinusoidal grating pattern projection is very attractive because of its high measuring speed and high sensitivity. When a sinusoidal amplitude grating was projected on an object, the surface-height distribution of the object is translated into a phase distribution of the deformed grating image. The phase-acquisition algorithms are so sufficiently simple that high-resolution phase maps using a CCD camera can be generated in a short time. The PMP technique is discussed, and the analysis of the systematic errors, the calibration procedure designed to determined the optimal setting of the measurement parameters is illustrated. Results of measurements and calibrations on the measurement plane objects are described.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2014.01a
• /
• pp.23-24
• /
• 2014

본 논문에서는 최근 모바일 기기에서 많이 사용되고 있는 마름모 패턴의 터치스크린패널(TSP; Touch Screen Pannel)에서 정확한 터치 위치를 획득하는 방법을 제안한다. 가로와 세로로 배치된 ITO 투명전극필름은 사용자의 터치로 인하여 변화된 정전용량(mutual capacitance)을 측정하여 터치위치를 파악한다. 그러나 터치패턴의 모양과 손가락의 크기에 따라서 측정되는 상호정전용량의 값에 차이가 발생하며 이 차이는 터치위치 계산에 영향을 미쳐서 정확한 터치위치를 획득하기 어렵게 한다. 이러한 결과로 TSP 상에서 직선을 그어도 측정된 터치 값은 S자 형태로 나타난다. 본 논문에서는 이러한 문제를 완화하기 위하여 Matlab 상에서 터치상황을 시뮬레이션하고 이를 이용하여 터치위치를 보상하여 보다 더 정확한 터치위치를 구하는 방법을 제안한다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.10A
• /
• pp.853-858
• /
• 2003

In the EUROCOM communication system, it defines frame structures as data rate. each frame includes a synchronization bit as frame alignment signal. In my paper proposes a FAS detector for determining state of synchronization as compare received data with FAS pattern, also presents a new detection method for synchronization secession which can decide acquisition state of synchronization with searching a synchronization channel through entire channels in frame.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2011.11a
• /
• pp.244-246
• /
• 2011

컬러 구조광을 이용한 깊이 정보 획득 시스템에서 구조광의 패턴의 색상 정보를 정확하게 추출하는 것이 중요하다. 본 논문에서는 시변화 가시구조광 시스템을 위한 색상 패턴을 해석하는 방법에 대해서 제안한다. 제안하는 방법은 시변화 가시구조광의 패턴이 투사된 영상으로부터 투사된 색상 정보를 추출하고, 추출된 색상 정보로부터 색상 패턴의 ID를 추출한다. 추출된 정보는 물체에 대한 깊이 정보로 계산될 수 있다. 패턴 ID를 빠르고 정확하게 추출하기 위해 최초의 원 패턴 정보를 기반으로 하여 Look-up 테이블을 구성하고, 이 테이블 정보를 이용하여 초기 패턴 ID 정보를 추출한다. 이후 추출된 패턴 ID에 대해서 신뢰도를 바탕으로 비어있는 정보를 채워준다. 본 논문의 실험에서는 제안하는 방법이 기존의 방법에 비해 정확하면서도 빠르게 색상 패턴 정보를 찾을 수 있음을 보여준다.

• The Journal of Korean Physical Therapy
• /
• v.13 no.3
• /
• pp.727-734
• /
• 2001

The purpose of this study was to obtain the information of the home treatment state for children with delayed development and to identify stress and coping pattern in mothers of the children. Data were collected from 211 mothers of delayed developmental children(DDC) by means of structured questionnaires. The results of this study were that in the home treatment mothers had technical insufficiencies to treat their children. so they had a difficulties in treating their children at home. But the home treatment were effective and mothers were assisted by their family and others in their treatment. The mothers had stress by anxiety of prognosis. hurts, responsibility, technical insufficiencies and negligent in housework. And acquisition of home treatment technique, the existence of assistant, and emotion in treatment also influenced on stress in the mother. The coping pattern in the stress were regular medical examination. communication with medical team and other mothers with DDC, faith of recovery and treatment. confidence in home treatment, family coorperation. and leisure time without concern for treatment. The younger mother received the more help from other mothers with DDC. And the mothers with severe, complex DDC had the more help from faith of recovery. Regular medical examination and faith of recovery were helpful coping pattern in mothers who had no treatment skill. Confidence in family coorperation and leisure time without concern for treatment were particularly helpful in mothers whose treatment duration is longer, and home treatment was not effective.

• Korean Journal of Remote Sensing
• /
• v.38 no.4
• /
• pp.343-353
• /
• 2022

An attempt to derive the surface temperature from the Korea Multi-purpose Satellite (KOMPSAT)-3A mid-wave infrared (MWIR) data acquired over the southern California on Nov. 14, 2015 has been made using the MODerate resolution atmospheric TRANsmission (MODTRAN) radiative transfer model. Since after the successful launch on March 25, 2015, the KOMPSAT-3A spacecraft and its two payload instruments - the high-resolution multispectral optical sensor and the scanner infrared imaging system (SIIS) - continue to operate properly. SIIS uses the MWIR spectral band of 3.3-5.2 ㎛ for data acquisition. As input data for the realistic simulation of the KOMPSAT-3A SIIS imaging conditions in the MODTRAN model, we used the National Centers for Environmental Prediction (NCEP) atmospheric profiles, the KOMPSAT-3Asensor response function, the solar and line-of-sight geometry, and the University of Wisconsin emissivity database. The land cover type of the study area includes water,sand, and agricultural (vegetated) land located in the southern California. Results of surface temperature showed the reasonable geographical pattern over water, sand, and agricultural land. It is however worthwhile to note that the surface temperature pattern does not resemble the top-of-atmosphere (TOA) radiance counterpart. This is because MWIR TOA radiances consist of both shortwave (0.2-5 ㎛) and longwave (5-50 ㎛) components and the surface temperature depends solely upon the surface emitted radiance of longwave components. We found in our case that the shortwave surface reflection primarily causes the difference of geographical pattern between surface temperature and TOA radiance. Validation of the surface temperature for this study is practically difficult to perform due to the lack of ground truth data. We therefore made simple comparisons with two datasets over Salton Sea: National Aeronautics and Space Administration (NASA) Jet Propulsion Laboratory (JPL) field data and Salton Sea data. The current estimate differs with these datasets by 2.2 K and 1.4 K, respectively, though it seems not possible to quantify factors causing such differences.

• Journal of the Korean Society for Precision Engineering
• /
• v.18 no.11
• /
• pp.51-57
• /
• 2001

A light beam reflected from a machined surface generally containes information concerning about its surface roughness. This study examines and proposes a surface roughness measurement technique for on-machine measurement of machined surfaces. The technique is based on the measurement of a reflected laser beam pattern and the statistical analysis of its light intensity distribution. The surface roughness was found to be closely related to the standard deviation of the light intensity on the primary axis of the reflected pattern. An image acquisition device is made up of a laser diode, a half mirror, a screen, and a CCD camera. The exact image with the primary and secondary axes of a reflected laser beam pattern is calculated through such image processing algorithm as thresholding, edge detection, image rotation, segmentation, etc. A median filter and a surrounding light correction algorithm are improve the image quality and reduce the measuring error. Using the developed measuring device the effect of screen materials and workpiece and workpiece materials was investigated. Experimental results regarding to relatively high-quality surfaces machined by grinding, polishing, lapping processes have shown the measurement error is within 10% in the range of $0.1{mu}m~0.8{\mu}m R_q.$Therefore, the proposed method is thought to be effectively used when quick measurements is needed with workpieces fixed on the machine.

• MALSORI
• /
• no.67
• /
• pp.61-77
• /
• 2008

The purpose of this study is to blow the characteristics of disfluency in childhood. The subjects were 144 normal children at the age of between 3 to 8 years who lived in Seoul. All the subjects provided spontaneous conversational speech samples during free-play interactions with their friends. We investigated the patterns and the frequency of disfluency and its relevance with subject's age, speaking rate and MLU(mean length of utterance). The results of this study can be summarized as follows. (1) There was no difference in the frequency of disfluency with the speaker's age or speaking rate. (2) Interjection was the most frequently occurring pattern of disfluency. (3) Prolongation, revision, interjection increased with age while part-word repetition, single-syllable word repetition, multi-syllable word repetition decreased gradually. (4) A significant effect of MLU on the frequency of disfluencies were demonstrated. The regression analysis has shown that more disfluencies occurred in utterances of children whose MLU is longer.