• Applied Chemistry for Engineering
• /
• v.10 no.3
• /
• pp.331-335
• /
• 1999

The transition metal oxides have been of interest as bifunctional electrocatalysts for bifunctional air electrodes. The amorphous citrate precursor (ACP) process has been optimized to prepare perovskite (La0.6Ca0.4CoO3) and pyrochlore (Pb2Ru2O6) powders with high surface area, and consequent improvement of The electrocatalytic performance in an air electrode with thermal treatment. PTFE -bonded gas diffusion electrodes loaded with perovskitc and pyrochlore catalysts showed good bifunctional performances. The electrodes were fairly stable up to 100 hour in the galvanostatic mode at ${\pm}25mA/cm^2$, from which these electrodes offer promise as practical bifunctional air electrodes.

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2003.11a
• /
• pp.388-394
• /
• 2003

To handle the high level radioactive materials such a spent fuel, the master-slave manipulators (MSM) are widely used as a remote handling device in nuclear facilities such as the hot cell with sealed and shielded space. In this paper, the Digital Mockup which simulates the remote operation of the Advanced Conditioning Process(ACP) is developed. Also, the workspace and the motion of the slave manipulator, as well as, the remote operation task should be analyzed. The process equipment of ACP and Maintenance/Handling Device are drawn in 3D CAD models using IGRIP. Modeling device of manipulator is assigned with various mobile attributes such as a relative position, kinematics constraints, and a range of mobility, The 3D graphic simulator using the external input device of space ball displays the movement of manipulator. To connect the external input device to the graphic simulator, the interface program of external input device with 6 DOF is deigned using the Low Level Tele-operation Interface(LLTI). The experimental result shows that the developed simulation system gives much-improved human interface characteristics and shows satisfactory response characteristics in terms of synchronization speed. This should be useful for the development of work's education system in the virtual environment.

• Journal of Digital Contents Society
• /
• v.5 no.1
• /
• pp.22-27
• /
• 2004

To handle the high level radioactive materials such a spent fuel, the master-slave manipulaters (MSM) are wide1y used as a remote handling device in nuclear facilities such as the hot cell with sealed and shielded space. In this paper, the Digital Mockup which simulates the remote operation of the Advanced Conditioning Process(ACP) is developed. Also, the workspace and the motion of the slave manipulator, as well as, the remote operation task should be analyzed. The process equipment of ACP and Maintenance/Handling Device are drawn in 3D CAD model using IGRIP. Modeling device of manipulator is assigned with various mobile attributes such as a relative position, kinematics constraints, and a range of mobility. The 3D graphic simulator using the extermal input device of spare ball displays the movement of manipulator. To connect the exterral input device to the graphic simulator, the interface program of external input device with 6 DOF is deigned using the Low Level Tele-operation Interface(LLTI). The experimental result show that the developed simulation system gives much-improved human interface characteristics and shows satisfactory reponse characteristics in terms of synchronization speed. This should be useful for the development of work`s education system in the environment.

• Korean Journal of Materials Research
• /
• v.11 no.3
• /
• pp.184-184
• /
• 2001

The effect of neutral ligand(L) on the precursor characteristics of (hfac)Cu(I)-L and on Cu MOCVD Process was studied. The neutral ligands of (hac)Cu(I)-L$_{x}$, such as ATMS(allytrimethylsilane), VTMS(vinyltrimethylsilane), VCH(vinylcyclohexane), MP(4-methyl-1-pentene), ACP(allylcyclopentane), and DMB(3,3-dimethyl-1-butene) were investigated. When the dissociation temperature of Cu(I)-L bond is low, low temperature deposition below $100^{\circ}C$ is possible and the resistivity of the film is low. But thermal stability of the precursor is low in this case. The resistivity is almost the same regardless of L at the deposition temperature range of $125~175^{\circ}C$. The resistivity is increased as the molecular weight of L becomes higher above $225^{\circ}C$ The vapor pressure of the precursor was closely related to the boiling point of L, the lower the boiling point of L, the higher the vapor pressurere.

• Korean Journal of Materials Research
• /
• v.11 no.3
• /
• pp.185-190
• /
• 2001

The effect of neutral ligand(L) on the precursor characteristics of (hfac)Cu(I)-L and on Cu MOCVD Process was studied. The neutral ligands of (hac)Cu(I)-L$_{x}$, such as ATMS(allytrimethylsilane), VTMS(vinyltrimethylsilane), VCH(vinylcyclohexane), MP(4-methyl-1-pentene), ACP(allylcyclopentane), and DMB(3,3-dimethyl-1-butene) were investigated. When the dissociation temperature of Cu(I)-L bond is low, low temperature deposition below $100^{\circ}C$ is possible and the resistivity of the film is low. But thermal stability of the precursor is low in this case. The resistivity is almost the same regardless of L at the deposition temperature range of $125~175^{\circ}C$. The resistivity is increased as the molecular weight of L becomes higher above $225^{\circ}C$ The vapor pressure of the precursor was closely related to the boiling point of L, the lower the boiling point of L, the higher the vapor pressurere.

• Journal of Korean Neurosurgical Society
• /
• v.64 no.6
• /
• pp.864-872
• /
• 2021

Objective : The aim of our study is to investigate the cytotoxic, antioxidant, and antimicrobial effects of newly synthesized boron compounds in U87MG glioblastoma cell treatment. Methods : We synthesized boron glycine monoester (BGM) and boron glycine diester (BGD) structures containing boron atoms and determined their cytotoxic activities on glioblastoma by the MTT method. The inhibitory concentration 50 (IC₅₀) value was calculated with GraphPad Prism 5.0 program. The IC₅₀ values were administered 48 hours on U87MG glioblastoma cell. Catalase (CAT), acid phosphatase (ACP) and alkaline phosphatase (ALP) enzyme activity, malondialdehyde (MDA), total glutathione (GSH), and total protein levels were detected using spectrophotometric methods. We determined the antimicrobial activities of BGM and BGD with the disc diffusion method. Results : After 48 hours of BGM and BGD application to U87MG glioblastoma cells, we found the IC₅₀ value as 6.6 mM and 26 mM, respectively. CAT and ACP enzyme activities were decreased in BGM and BGD groups. MDA which is a metabolite of lipid peroxidation was increased in both boron compounds groups. GSH level was reduced especially in BGD group. BGM and BGD have been found to be antimicrobial effects. Conclusion : Boron compounds, especially the BGM, can provide a new therapeutic approach for the treatment of glioblastoma with their anticancer, antioxidant, and antimicrobial effects.

• The korean journal of orthodontics
• /
• v.49 no.4
• /
• pp.254-264
• /
• 2019

Objective: To evaluate the short-term changes in masticatory muscle activity and mandibular movement patterns after orthognathic surgery in skeletal Class III patients with facial asymmetry. Methods: Twenty-seven skeletal Class III adult patients were divided into two groups based on the degree of facial asymmetry: the experimental group (n = 17 [11 male and 6 female]; menton deviation ${\geq}4mm$) and control group (n = 10 [4 male and 6 female]; menton deviation < 1.6 mm). Cephalography, electromyography (EMG) for the anterior temporalis (TA) and masseter muscles (MM), and mandibular movement (range of motion [ROM] and average chewing pattern [ACP]) were evaluated before (T0) and 7 to 8 months (T1) after the surgery. Results: There were no significant postoperative changes in the EMG potentials of the TA and MM in both groups, except in the anterior cotton roll biting test, in which the masticatory muscle activity had changed into an MM-dominant pattern postoperatively in both groups. In the experimental group, the amount of maximum opening, protrusion, and lateral excursion to the non-deviated side were significantly decreased. The turning point tended to be shorter and significantly moved medially during chewing in the non-deviated side in the experimental group. Conclusions: In skeletal Class III patients with facial asymmetry, the EMG activity characteristics recovered to presurgical levels within 7 to 8 months after the surgery. Correction of the asymmetry caused limitation in jaw movement in terms of both ROM and ACP on the non-deviated side.

• Nuclear Engineering and Technology
• /
• v.54 no.11
• /
• pp.4236-4243
• /
• 2022

An industrial nuclear technique based on the use of an X-ray profiler was implemented to estimate the densities or concentrations of sediments present in an Atlantic maritime zone in the areas subjected to dredging under the governance of the Panama Canal Authority (ACP). The sediment profiles show in most areas there is a concentration of between 1.00-1.15 g/cm³ except for one area in particular, the density starts at 1.20 g/cm³ and even reaches values greater than 1.50 g/cm³; therefore, an already consolidated sediment is present, which, depending on the depth found. Values of 1.265 g/cm³, 1.297 g/cm³, 1.185 g/cm³ obtained by ACP previous studies are within the range of 1.20-1.30 g/cm³ measured with the nucleonic gauge. However, it should be noted that during the tests with the X ray profiler, sediment densities values greater than the aforementioned limit were also obtained that varying according at depths close to 12 m and 18 m with values reached up to 1.513 g/cm³ and 1.60 g/cm³, respectively. This demonstrates that sediment accumulation depends on depth. This nucleonic gauge is feasible technique for the study of the sedimentation phenomenon in channel basins and even in other projects nationwide.

• Korean Journal of Ichthyology
• /
• v.23 no.1
• /
• pp.1-9
• /
• 2011

Differentially Expressed Gene (DEG) was obtained from Differential Display Reverse Transcription (DDRT)-PCR using Annealing Control Primer (ACP) to search and clone genes related to developmental stages of Sebastes inermis. By using 120 ACPs, the nucleotide sequences obtained from 16 DEGs showing higher expression in 6-month-old skeletal muscle than 18-month-old ones and from 22 DEGs displaying stronger expression in 18-month-old than 6-month-old were analyzed and BLAST was conducted. The results identified that DEGs shared 69~95% homology with genes of parvalbumin (PVALB), nucleoside diphosphate kinase (NDK) B, tropomyosin (TPM), troponin I (TnI), glyceraldehyde-3-phosphate dehydrogenase (GAPDH), muscle-type creatine kinase (CKM2), small EDRK-rich factor 2 (SERF2), adenosine monophosphate deaminase (AMPD), Trimeric intracellular cation channel type A (TRICA), Rho GTPase-activating protein 15 (ARHGAP15), S-formylglutathione hydrolase (Esterase D; ESD), heat shock protein 70 (hsp70), type 1 collagen alpha 2 (COL1A2), glutathione S-transferase, Mid1-interacting protein 1 (Mid1lip1), myosin light chain 1 (MYL1), sarcoplasmic/endoplasmic reticulum calcium ATPase 1B (SERCA1B), and ferritin heavy subunit (FTH1). Expression pattern by developmental stage of DEG14 and PVALB exhibiting strong expression in 6-month-old skeletal muscle was investigated using real time PCR. Expression was reduced as Sebastes inermis grew. Expression of PVALB gene was extremely low after 6 months of age. Expression of CKM2 showed higher expression in 18-month-old skeletal muscle than in 6-month-old muscles, and increased continuously until 4 years old, after which CKM2 expression became gradually reduced. By analysis of tissue-specific expression patterns of DEG, DEG14 was expressed mainly in skeletal muscle, liver, kidney and spleen tissues, whereas PVALB expression was expressed in skeletal muscle and kidney, but not in liver and spleen tissues. CKM2 was expressed in skeletal muscle, kidney, and spleen tissues, but not in liver tissues. PVALB gene was composed of 110 amino acids, which constituted 659 bp nucleotides. The results reported here demonstrate that the expression patterns of parvalbumin and CKM2 could be used as molecular markers for selecting fishes exhibiting fast growth.

• Journal of radiological science and technology
• /
• v.8 no.2
• /
• pp.47-63
• /
• 1985

This paper was aimed to study the effects of Cobalt-60 gamma ray irradiation on Albino rat blood cells and the activity of enzymes were measured using blood cell auto analyzer (Cell-Dyn 900) and enzyme autoanalyzer (Gilford 3500) respectively. Cobalt-60 gamma rays those are grouped into 200R, 400R, 600R, 800R, 1,000R, 1,200R, 1,300R, 1,400R, 1,500R and 1,600R to the rats of male and female and measured the numeral varieties of blood corpuscles of the rats and the active varieties of enzyme of acid, alkaline phosphatase (ACP, ALP), lactic acid dehydrogenase (LDH), glutamic oxaloacetic transaminase (GOT) and glutamic pyruvic transaminase. (GPT) those came out after 1, 3, 5 or 7 days. The results are summarized as follows: 1. In both case of male and female, the numeral varieties of the erythrocytes, in the 200R group of irradiation showed the minimum value in the 3 days group and a tendency of increase in the 5 and 7 days groups, while the numeral varieties of the leucocytes in every groups of irradiation showed a tendency of a rapid decrease after a day. The numeral varieties of the blood platelet in both case of male and female didn't show generally any great change in a day and 3 days groups, but showed a rapid decreasing appearance after the 5 days. 2. In both case of male and female, the activities of ACP were on the decrease gradually after 3 days of the irradiation and the activities of ALP were on the decrease after 5 days. Similarly in both case of mate and female, the activities of LDH showed the decrease after 3 and 5 days, and the phenomenous of GOT showed an appearance of increase in a day, but decreased after 3 days. As for the GPT activities couldn't find any great change in the male rats in comparison with the control groups, but in the female rats a tendency of the increase in 600R, 800R, 1,000R groups after 3 days. 3. In the case of the irradiation of high quantity of ray more than 1,200R, all rats died after 4 days, and by the irradiation of 1,600R all rats died after 3 days, and it showed the sensitive response of a living body to the irradiation of high quantity.