• Journal of the Korean Society of Combustion
• /
• v.21 no.2
• /
• pp.29-37
• /
• 2016

This study described the experimental investigations of combustion instability in a model gas turbine combustor. Strong coupling between pressure oscillations and unsteady heat release excites a self-sustained acoustic wave, which results in a loud and annoyed sound, and may also lead to a structural damage to the combustion system. In this study, in order to examine the combustion instability phenomenon of a dual swirling combustor configuration, the information of heat release and pressure fluctuation period with respect to the variation in both thermal power and combustor length was collected experimentally. As a result, the fundamental acoustic frequency turned out to increase with the increasing thermal power without respect to the combustor length. The frequency response to the combustor length was found to have two distinct regimes. In a higher power regime the frequency significantly decreases with the combustor length, as it is expected from the resonance of gas column. However, in a lower power regime it is almost insensitive to the combustor length. This insensitive response might be a result of the beating phenomenon between the interacting pilot and main flames with different periods.

• Journal of Hydrogen and New Energy
• /
• v.29 no.5
• /
• pp.538-548
• /
• 2018

The thermo-acoustic instability in the combustion process of a gas turbine is caused by the interaction of the heat release mechanism and the pressure perturbation. These acoustic vibrations cause fatigue failure of the combustor and decrease the combustion efficiency. This study is to develop a segmented dynamic thermo-acoustic model to understand combustion instability of gas turbine. Therefore, this study required a dynamic analysis rather than static analysis, and developed a segmented model that can analyze the performance of the system over time using the Matlab/Simulink. The developed model can confirm the thermo-acoustic combustion instability and exhaust gas concentration in the combustion chamber according to the equivalent ratio change, and confirm the thermo-acoustic combustion instability for the inlet temperature and the load changes. As a result, segmented dynamic thermo-acoustic model has been developed to analyze combustion instability under the operating condition.

• 한국연소학회:학술대회논문집
• /
• 1999.10a
• /
• pp.11-20
• /
• 1999

Acoustic pressure response and NO formation of hydrogen-air diffusion flames at various pressures are numerically studied by employing counterflow diffusion flame as a model flame let in turbulent flames in combustion chambers. The numerical results show that extinction strain rate increases linearly with pressure and then decreases, and increases again at high pressures. Thus, flames are classified into three pressure regimes. Such non-monotonic behavior is caused by the change in chemical kinetic behavior as pressure rises. Acoustic pressure response in each regime is investigated based on the Rayleigh criterion. At low pressures, pressure-rise causes the increase in flame temperature and chain branching/recombination reaction rates, resulting in increased heat release. Therefore, amplification in pressure oscillation is predicted. Similar phenomena are predicted at high pressures. At moderate pressures, weak amplification is predicted. Emission index of NO shows similar behaviors as to the peak-temperature variation with pressure.

• Proceedings of the KSME Conference
• /
• 2003.11a
• /
• pp.320-325
• /
• 2003

Acoustic-Pressure Response of diluted hydrogen-air diffusion flames is investigated numerically by adopting a fully unsteady analysis of flame structures. In the low-pressure regime, the amplification index remains low and constant at low frequencies. As acoustic frequency increases, finite-rate chemistry is enhanced through a nonlinear accumulation of heat release rate, leading to a high amplification index. Finally, the flame responses decrease at high frequency due to the response lag of the transport zone. For a medium-pressure operation and low-frequency excitation, the amplification index is low and constant. It then decreases at moderate frequencies. As frequency increases further, the amplification index increases appreciably due to an intense accumulation effect.

• Journal of Biomedical Engineering Research
• /
• v.31 no.5
• /
• pp.385-394
• /
• 2010

Automatic gain control(AGC) is used in hearing aids to compensate for the hearing level as to reduced dynamic range. AGC is consisted of the main 4 factors which are compression threshold, compression ratio, attack time, and release time. This study especially focus on each individual need for optimum release time parameters that can be changed within 7 certain range such as 12, 64, 128, 512, 2094, and 4096ms. To estimate the effect of various release time in AGC, twelve normal hearing and twelve hearing impaired listeners are participated. The stimuli are used by one syllable and sentence which have the same acoustic energy respectively. Then, each of score of the word recognition score is checked in quiet and noise conditions. As a result, it is verified that most people have the different best recognition score on specific release time. Also, if hearing aids is set by the optimum release time in each person, it is helpful in speech recognition and discrimination.

• Journal of the Society of Naval Architects of Korea
• /
• v.56 no.1
• /
• pp.94-101
• /
• 2019

Underwater acoustic power should be measured in a free field, but it is not easy to implement. In practice, the measurement could be performed in a reverberant field such as a water-filled steel tank and concrete tank. In this case, the structure and the acoustic field are strongly or weakly coupled according to material properties of the steel and water. So, characteristics of the water tank must be investigated in order to get the accurate underwater acoustic power. In detail, modal frequencies, mode shapes of the structure and frequency response functions of the acoustic field could represent the characteristics of the reverberant water tank. In this paper, the structure-acoustic coupling has been investigated on a reverberant water tank numerically and experimentally. The finite element analysis has been carried out to estimate the structural and acoustical modal parameters under the dry and water-filled conditions, respectively. In order to investigate the structure-acoustic coupling effect, the numerical analysis has been performed according to the structure stiffness change of the water tank. The acoustic frequency response functions were compared with the numerical analysis and acoustic exciting test. From the results, the structural modal frequencies of the water-filled condition have been decreased compared to those of the dry condition in the low frequency range. The acoustic frequency response functions under the coupled boundary conditions showed different patterns from those under the ideal boundary conditions such as the pressure release and rigid boundary condition, respectively.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.46 no.3
• /
• pp.232-238
• /
• 2010

The moving ranges and behavior of four wild abalones, Haliotis discus hannai, were measured by an acoustic telemetry technique. The shape of the sea bottom of the experimental area was surveyed by a bathymetry system and three self-recording type acoustic receivers were used for monitoring the behavior and measuring the movement range. The abalones (WA1-WA4) attached acoustic tags were released and measured the movement during ten months. Three abalones (WA1, WA3 and WA4) were successively detected around the released point during the experiment and were moved to the V2 area where water depth is deeper than the V1 area. The change of inhabitation depth was also detected from the depth sensor of WA4. As the result, abalones were moved to deeper water area accordance with the decrease of the water temperature. The moved ranges of abalones were approximately 200 - 400m from the release point.

• Phonetics and Speech Sciences
• /
• v.4 no.2
• /
• pp.61-70
• /
• 2012

The current study observes the durational interaction of tautosyllabic consonants and vowels in the word-initial position of English and Korean child-directed speech (CDS). The effect of phonological laryngeal contrasts in stops on the following vowel duration, and the effect of the intrinsic vowel duration on the release duration of preceding stops in addition to the acoustic realization of the contrastive segments are explored in different prosodic contexts - phrase-initial/medial, focal accented/non-focused - in a marked speech style of CDS. A trade-off relationship between Voice Onset Time (VOT), as consonant release duration, and voicing phonation time, as vowel duration, reported from adult-to-adult speech, and patterns of durational variability are investigated in CDS of two languages with different linguistic rhythms, under systematically controlled prosodic contexts. Speech data were collected from four native English mothers and four native Korean mothers who were talking to their one-word staged infants. In addition to the acoustic measurements, the transformed delta measure is employed as a variability index of individual tokens. Results confirm the durational correlation between prevocalic consonants and following vowels. The interaction is revealed in a compensatory pattern such as longer VOTs followed by shorter vowel durations in both languages. An asymmetry is found in CV interaction in that the effect of consonant on vowel duration is greater than the VOT differences induced by the vowel. Prosodic effects are found such that the acoustic difference is enhanced between the contrastive segments under focal accent, supporting the paradigmatic strengthening effect. Positional variation, however, does not show any systematic effects on the variations of the measured acoustic quantities. Overall vowel duration and syllable duration are longer in English tokens but involve less variability across the prosodic variations. The constancy of syllable duration, therefore, is not found to be more strongly sustained in Korean CDS. The stylistic variation is discussed in relation to the listener under linguistic development in CDS.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.21 no.11
• /
• pp.1527-1537
• /
• 1997

Extinction characteristics and acoustic response of hydrogen-air diffusion flames at various pressures are numerically studied by employing counterflow diffusion flame as a model flamelet in turbulent flames in combustion chambers. The numerical results show that extinction strain rate increases linearly with pressure and then decreases, and increases again at high pressures. Thus, flames are classified into three pressure regimes. Such nonmonotonic behavior is caused by the change in chemical kinetic behavior as pressure rises. The investigation of acoustic-pressure response in each regime, for better understanding of combustion instability, shows different characteristics depending on pressure. At low pressures, pressure-rise causes the increase in flame temperature and chain branching/recombination reaction rates, resulting in increased heat release. Therefore, amplification in pressure oscillation is predicted. Similar phenomena are predicted at high pressures. At moderate pressures, weak amplification is predicted since flame temperature and chain branching reaction rate decreases as pressure rises. This acoustic response can be predicted properly only with detailed chemistry or proper reduced chemistry.

• Journal of Power System Engineering
• /
• v.9 no.1
• /
• pp.5-13
• /
• 2005

Acoustic emission(AE) is defined as the transient elastic waves thar are generated by the rapid release of energy. The advantage of AE is that very early crack growth can be detected well before a highly stressed component may fail. At present, an exact diagnosis is the most reliable means for determining the soundness of structures during power plant operations. AE monitoring has been applied successfully in power plants to determine mechanical problems, pressure vessel integrity and external valves leaks, vacuum leaks, the onset of cavitation in pumps and valves, the presence of flow(or no flow) in piping and heat exchange equipment, etc. Acoustic emission(AE) technology has recently strengthened its application base, and practitioners' understanding of the technique's fundamentals. This paper introduces the methods of a survey and assessment on AE monitoring applications in nuclear, fossil and hydraulic power plant. The main objective of this paper was to obtain information on various applications of AE technology in power plant.