• International Journal of Aeronautical and Space Sciences
• /
• 제17권3호
• /
• pp.285-295
• /
• 2016

A contact strip shape of a high speed train pantograph system was optimized with CFD to increase the aerodynamic performance and stability of contact force, and the results were validated by a wind tunnel test. For design of the optimal contact strip shape, a Kriging model and genetic algorithm were used to ensure the global search of the optimal point and reduce the computational cost. To enhance the performance and robustness of the contact strip for high speed pantograph, the drag coefficient and the fluctuation of the lift coefficient along the angle of attack were selected as design objectives. Aerodynamic forces were measured by a load cell and HWA (Hot Wire Anemometer) was used to measure the Strouhal number of wake flow. PIV (Particle Image Velocimetry) was adopted to visualize the flow fields. The optimized contact strip shape was shown a lower drag with smaller fluctuation of vertical lift force than the general shaped contact strip. And the acoustic noise source strength of the optimized contact strip was also reduced. Finally, the reduction amount of drag and noise was assessed when the optimized contact strip was applied to three dimensional pantograph system.

• 대한기계학회논문집
• /
• 제16권1호
• /
• pp.13-21
• /
• 1992

본 연구에서는 구조-음향모드 연성계수를 이용하여 심각한 소음문제가 발생하 는 경우의 효과적인 소음저감 방안을 제시하고, 제작된 차실모델에 대한 소음저감 시 뮬레이션을 수행한 후 그 결과를 실험치와 비교함으로써 수립된 소음저감 방안의 신뢰 도와 유용성을 확인하였다.

• 비파괴검사학회지
• /
• 제28권3호
• /
• pp.292-301
• /
• 2008

A linearized model for hysteretic acoustic nonlinearity of imperfectly joined interface is proposed and analyzed by using Coulomb damping to investigate the characteristics of the reflection and transmission coefficients for harmonic waves at the contact interface. Closed crack is modeled as non welded interface that has nonlinear discontinuity condition in displacement across its boundary. Based on the hysteretic contact stiffness of the contact interface, the reflected and transmitted waves are determined by deriving the tractions on both sides of the interface in terms of the discontinuous displacements across the interface. It is found that the amplitudes of the reflected and transmitted waves are dependent on the frequency and the hysteretic stiffness. As the frequency of the incident wave increases, the higher reflection and lower transmission are obtained. It also shows that the hysteresis of the interface increases the reflection coefficient, but reduces the transmission coefficient. A fatigue crack is also made in aluminum specimen to demonstrate these characteristics of the reflection and transmission of contact interfaces.

• 한국해양공학회지
• /
• 제22권1호
• /
• pp.53-57
• /
• 2008

Friction welding was performed to investigate mechanical properties for Ni-base superalloy with 15 mm diameter solid bar. The main friction welding parameters were selected to endure good quality welds on the basis of visual examination, tensile tests, impact energy test, Vickers hardness surveys of the bond of area and heat affected zone. And then, the nondestructive technique to evaluate the weld quality was carried out by acoustic emission(AE) and ultrasonic attenuation coefficient. The tensile strength of the friction welded joint was shown up to 90 % of the Alloy718 base metal under the condition of the heating time over 5 sec. The optimal welding conditions were n=2,000 rpm, $P_1=200$ MPa, $P_2=200$ MPa, $t_1=8$ sec and $t_2=5$ sec when the total upset length was 4.4 mm.

• 대한후두음성언어의학회지
• /
• 제19권2호
• /
• pp.123-127
• /
• 2008

Background and Objectives: Smoking has been identified as one of the main determinants of negative changes on the larynx histology. The purpose of this study is to investigate the voice characteristics and correlation between voice parameters of the smokers with vocal polyp or nodule or both of them. Materials and Method: MPT, $F_0$, jitter, shimmer, NHR of Korean /a/ vowel from 54 smokers and 50 nonsmokers diagnosed as vocal polyp or nodule were analyzed. A Computerized Speech Lab (4400) was for the analysis of each voice sample and statistical analysis was done by one-way ANOVA and Pearson correlation coefficient. Result and Conclusion: It showed that we can find difference between smokers and nonsmokers group in MPT, $F_0$, jitter, shimmer were different except NHR. each group shows difference in correlation coefficient between MPT, $F_0$, jitter, shimmer.

• Ocean Systems Engineering
• /
• 제14권2호
• /
• pp.101-114
• /
• 2024

Seafloor sediment mapping is an essential research topic in shallow coastal waters, especially in port development, benthic habitat mapping, and underwater communications. The seafloor sediments can be interpreted by collecting sediment samples directly in the field using a grab sampler or corer. Another method is optical, especially using underwater cameras and videos. Both methods each have weaknesses in terms of area coverage (mechanic) and accurate positioning (optic). The latest technology used to overcome it is the acoustic method (echosounder) with Global Navigation Satellite System (GNSS) Real Time Kinematic (RTK) positioning. Therefore, in this study will propose the classification of seafloor sediments in coastal waters using acoustic method that is Multibeam Echosounder (MBES) multi-frequency with five frequency (200 kHz, 250 kHz, 300 kHz, 350 kHz, and 400 kHz). In this study, the deep neural network (DNN) used the bathymetric multi frequency, bathymetric difference inters frequencies, and bathymetric features from 5 (five) frequencies as input layer and 4 (four) sediment types in 74 (seventy-four) sample sediment as output layer to make a seafloor sediment map. Results of sediment mapping using the DNN method show an overall accuracy of 71.6% (significant) and a kappa coefficient of 0.59 (moderate). The distribution of seafloor sediment in the study area is mainly silt (41.6%), followed by clayey sand (36.6%), sandy silt (14.2%), and silty sand (7.5%).

• 한국음향학회지
• /
• 제25권5호
• /
• pp.246-256
• /
• 2006

평면파 반사 계수는 수중에서의 음파에너지에 관한 해저 바닥의 모든 정보를 담고 있고 음향 해석 모델의 입력 값으로도 사용할 수 있는 음향학적 물리량이다. 본 연구에서는 실험실 수조 환경에서 입자 매질 ( 세 종류의 유리구슬, 모래 )의 평면파 반사 계수, 음속 및 감쇠계수를 측정했다. 반사 실험은 수조의 한계를 고려해 $28{\sim}53^{\circ}$의 입사각과 중심 주파수 100kHz의 협대역 신호를 이용해 수행했다. 자기 교정법 (Self-calibration method)을 이용해 측정된 자료로부터 반사 계수를 계산했고 측정된 반사 계수의 경향 및 실험의 불확실성을 서술했다. 입자 매질의 음속 및 감쇠계수는 거리 수신 신호간의 회귀분석을 통해 계산했다. Biot 이론을 이용해 측정된 음속과 감쇠계수로부터 다공율과 침투율을 추정하고 실제 지질학적 측정값과의 유사성을 확인했다. 최종적으로 추정된 다공율, 침투율을 이용해 이론적 인 반사 계수를 계산하고 반사 실험의 측정값과 비교했다. 본 실험 결과는 Biot 이론으로 일관성 있게 입자 매질의 음향학적 물성을 설명할 수 있음을 입증한다.

• 비파괴검사학회지
• /
• 제22권6호
• /
• pp.621-626
• /
• 2002

The amplitude of a back-wall echo depends on the reflection coefficient of the interface between a transducer and a test material when using contact pulse-echo ultrasonic testing. A couplant is used to transmit ultrasonic energy across the interface, but has an influence on the amplitude of the pulse-echo signal. To investigate the couplant effect on pulse-echo ultrasonic testing, back-wall echoes are measured by using various couplants made of water and glycerine in a carbon and austenitic stainless steel specimens. The amplitude of the first back-wall echo and the apparent attenuation coefficient increases with the acoustic impedance of the couplant. The couplant having a higher value of the transmission coefficient is more effective for flaw detection. The reflection coefficient should be known in order to measure the attenuation coefficient of the test material.

• 대한기계학회논문집B
• /
• 제20권5호
• /
• pp.1649-1660
• /
• 1996

The flow around a circular cylinder was controlled by an acoustic excitation issued from a thin slit along the cylinder axis. The static pressure distributions around the cylinder wall and flow characteristics in the near wake have been measured. Experiments were performed under three cases of Reynolds number, 7.8 * 10$\^$4/, 2.3 * 10$\^$5/ and 3.8 * 10$\^$5/. The effects of excitation frequency, sound pressure level and the location of the slit were examined. Data indicate that the excitation frequency and the slit location are the key parameters for controlling the separated flow. At Re$\_$d/, = 7.8 * 10$\^$4/, the drag is reduced and the lift is generated to upward direction, however, at Re$\_$d/, =2.3 * 10$\^$5/ and 3.8 * 10$\_$5/, the drag is increased and lift is generated to downward direction inversely. It is thought that the lift switching phenomenon is due to the different separation point of upper surface and lower surface on circular cylinder with respect to the flow regime which depends on the Reynolds number. Vortex shedding frequencies are different at upper side and lower side. Time-averaged velocity field shows that mean velocity vector and the points of maximum intensities are inclined to downward direction at Re$\_$d/ = 7.8 * 10$\^$4/, but are inclined to upward direction at Re$\_$d/ = 2.3 * 10$\^$5/.

• 지질공학
• /
• 제11권3호
• /
• pp.279-294
• /
• 2001

지하구조물 건설시에 구조물의 안정성을 확보하거나 우물을 굴착할 때 충분한 양의 지하수를 확보하기 위해서는 정확한 수리적 매개변수를 알아내는 것이 필수적이다. 본 연구에서는 금정산 화강암지역에 시추된 6개 시험공의 여러 심도에서 수압시험을 실시하고, Moye식과 Hvorslev식을 이용하여 수리전도도를 구하였다. 또한 수리전도도와 텔레뷰어검층 및 시추코어자료로부터 얻어진 단열빈도를 서로 비교하고, 이들간의 상관성을 구하였다. 그 결과, 대부분의 시험공에서 텔레뷰어 자료가 시추코어자료보다 수리전도도와의 상관성이 높으나, 상관계수는 0.5미만이다. 이것은 연구지역 화강암의 수리전도도가 단열빈도뿐만 아니라 단열의 간극, 길이, 연결성, 방향, 경사도 그리고 충전물 등과도 복합적으로 관련됨을 암시한다.