• 생태와환경
• /
• 제38권spc호
• /
• pp.8-11
• /
• 2005

Carbon stable isotope ratios of producers varied in lake ecosystems. In tile present study, we tried to estimate the seasonal variations of carbon isotope ratios of phytoplankton and benthic diatoms in a strongly acidic lake ecosystem. Lake Katanuma is a volcanic, strongly acidic lake (average pH of 2.2), located in Miyagi, Japan. Only two algal species dominate in Lake Katanuma; Pinnularia acidojaponica as a benthic diatom, and Chlamydomonas acidophila as a green alga. Carbon isotope values of P. acidojaponica varied seasonally, while those of particulate organic matter, which were mainly composed of C. acidophila remained fairly stable. The differences suggested that $CO_2$ gas was more frequently limited for P. acidojaponica than C. acidophila, since high density patches of benthic diatoms were sometimes observed on the lake sediment. Generally, carbon concentration mechanisms (CCMs)of microalgae can fix bicarbonate in lakes, and affect the carbon isotope values of microalgae. While, in Lake Katanuma, CCMs of the microalgae may scarcely function because of high $CO_2$ gas concentration and low pH. This is the reason for low seasonal amplitude of carbon isotope values of phytoplankton relative to those in other lakes.

• 생태와환경
• /
• 제38권4호통권114호
• /
• pp.435-438
• /
• 2005

We observed the physical, chemical, and biological characteristics of an acidic lake, Lake Katanuma, from 1998 to 2002 at weekly or biweekly intervals, except during the winter. This volcanic lake has a dimictic thermal pattern. In summer, the volcanic heat supply at the lake bottom results in weak thermal stratification. In 1998, 1999, and 2002, short-term holomixis was observed during the stratification period, when the anoxic, hydrogen sulfide-rich water from the hypolimnion spread across the entire lake. In contrast, distinct short-term holomixis did not occur during the stratificatlon period in 2000 and 2001. However, the early onset of the autumn turnover in August 2000 and 2001 caused anoxic conditions to persist throughout the entire water column for more than 2 weeks. The anoxic and hydrogen sulfide-rich conditions affected population densities of chironomid larvae (Chironomus acerbiphilus) and planktonic algae (Chlamydomonas acidophila), both dominant species in Lake Katanuma. Thus, the interannual variations of limnological characteristics influenced the seasonal population changes of these species.

• 상하수도학회지
• /
• 제12권2호
• /
• pp.59-66
• /
• 1998

The feasibility of usage of sludge from water treatment plant and chalk from schools and institutes was investigated to remove the phosphorus in the lakes which induce the eutrophication every year. In this study phosphorus removal efficiencies of sludge and chalk were investigated by changing various factors. Higher phosphorus removal efficiency using larger particle size of chalk was observed which means that the surface area is not an important factor in removing phosphorus in aqueous phase. The proper shaking time and temperature were 2 hours and $25^{\circ}C$, respectively. The removal efficiency using sludge from water treatment plant was almost 100%, which is similar to those of CaO and $Ca(OH)_2$. It means that sludge can be reused in removing phosphorus. It was also found that chalk was better in removing phosphorus under alkaline condition and sludge was better under acidic condition. About 75% phosphorus removal efficiency was observed using sludge from the water sample in Lake Sihwa.

• Structural Monitoring and Maintenance
• /
• 제11권3호
• /
• pp.187-202
• /
• 2024

For the problems of high compressibility and low strength of peat soil formed by lake-phase deposition in Dianchi Lake, microbial-induced calcium carbonate deposition (MICP), phyto-urease-induced calcium carbonate deposition (EICP) and phyto-urease-induced calcium carbonate deposition combined with lignin (EICP combined with lignin) were used to reinforce the peat soil, the changes in mechanical properties of the soil before and after the reinforcement of the peat soil were experimentally investigated, and the effect and mechanism of peat soil reinforcing by the three reinforcing techniques were tested and analyzed using X-ray diffraction (XRD) and scanning electron microscope (SEM). The results show that: compared to the unreinforced remolded peat soil specimens, the unconfined compressive strength (UCS), cohesion and internal friction angle of the specimens reinforced by MICP, EICP and EICP combined with lignin techniques have been greatly improved, and the permeability resistance has been improved by two, two and three orders of magnitude, respectively; the different methods of reinforcing generate different calcium carbonate crystalline phases, with the EICP combined with lignin technique generating the most stable calcite, and the MICP and EICP techniques generating a mixed phase of calcite and spherulitic chalcocite. Analyses showed that for peat soil reinforcement, the acidic environment of peat soil inhibited the growth and reproduction of bacteria, EICP technology was superior to MICP technology, and the addition of lignin solved the defect of the EICP technology that did not have a "nucleation site", so EICP combined with lignin reinforcement was preferred for the improvement of peat soil.

• Environmental Engineering Research
• /
• 제10권3호
• /
• pp.105-111
• /
• 2005

The applicability of the USEPA's (United States Environmental Protection Agency) three criteria of enhanced coagulation (criterion 1-TOC level less than 2 mg/l. before chlorination; criterion II-% requirement of TOC removal; criterion III-point of diminishing return) for Korean waters was evaluated in this study. This study also investigated an effect of enhanced coagulation on turbidity removal, and attempted to identify the best coagulant for enhanced coagulation. Three different waters were used in this study: one river water and two lake waters. five different coagulants were used: alum, liquid alum, PACl, ferric chloride with and without water. Results of this study showed that all three criteria were achievable for the tested waters. For these waters, controlling criterion was found to be different depending upon raw water characteristics. When initial Toe level was low(< 4 mg/L), criterion I (< 2 mg/L) could be the controlling criterion. As TOC level increased, criterion II (% TOC removal) became the controlling criteria. It was possible to achieve different goals of turbidity and TOC removals. Although the optimum region of TOC removal was more acidic than that of turbidity removal, there was no conflict between these two removals. The best coagulant was found to be different depending upon the evaluation tool: maximum and optimum removal. ferric chloride was more effective than alum in terms of the maximum TOC removal, while Al-based coagulant such as alum or PACl was the best coagulant in terms of the optimum TOC removal.

• Journal of Microbiology and Biotechnology
• /
• 제29권5호
• /
• pp.765-775
• /
• 2019

A new ${\alpha}$-amylase-encoding gene (amySL3) of glycoside hydrolase (GH) family 13 was identified in soda lake isolate Alkalibacterium sp. SL3. The deduced AmySL3 shares high identities (82-98%) with putative ${\alpha}$-amylases from the genus Alkalibacterium, but has low identities (<53%) with functionally characterized counterparts. amySL3 was successfully expressed in Escherichia coli, and the recombinant enzyme (rAmySL3) was purified to electrophoretic homogeneity. The optimal temperature and pH of the activity of the purified rAmySL3 were determined to be $45^{\circ}C$ and pH 7.5, respectively. rAmySL3 was found to be extremely halophilic, showing maximal enzyme activity at a nearly saturated concentration of NaCl. Its thermostability was greatly enhanced in the presence of 4 M NaCl, and it was highly stable in 5 M NaCl. Moreover, the enzyme did not require calcium ions for activity, and was strongly resistant to a range of surfactants and hydrophobic organic solvents. The major hydrolysis products of rAmySL3 from soluble starch were maltobiose and maltotriose. The high ratio of acidic amino acids and highly negative electrostatic potential surface might account for the halophilic nature of AmySL3. The extremely halophilic, calcium-independent, and surfactant-resistant properties make AmySL3 a promising candidate enzyme for both basic research and industrial applications.

• Journal of Microbiology and Biotechnology
• /
• 제27권12호
• /
• pp.2119-2128
• /
• 2017

Citrinin (CIT) is a toxic secondary metabolite produced by fungi belonging to the Penicillium, Aspergillus, and Monascus spp. This toxin has been detected in many agricultural products. In this study, a strain Y3 with the ability to eliminate CIT was screened and identified as Cryptococcus podzolicus, based on the sequence analysis of the internal transcribed spacer region. Neither uptake of CIT by cells nor adsorption by cell wall was involved in CIT elimination by Cryptococcus podzolicus Y3. The extracellular metabolites of Cryptococcus podzolicus Y3 stimulated by CIT or not showed no degradation for CIT. It indicated that CIT elimination was attributed to the degradation of intracellular enzyme(s). The degradation of CIT by C. podzolicus Y3 was dependent on the type of media, yeast concentration, temperature, pH, and initial concentration of CIT. Most of the CIT was degraded by C. podzolicus Y3 in NYDB medium at 42 h but not in PDB medium. The degradation rate of CIT was the highest (94%) when the concentration of C. podzolicus Y3 was $1{\times}10^8cells/ml$. The quantity of CIT degradation was highest at $28^{\circ}C$, and there was no degradation observed at 3$5^{\circ}C$. The study also showed that acidic condition (pH 4.0) was the most favorable for CIT degradation by C. podzolicus Y3. The degradation rate of CIT increased to 98% as the concentration of CIT was increased to $20{\mu}g/ml$. The toxicity of CIT degradation product(s) toward HEK293 was much lower than that of CIT.

• 대한환경공학회지
• /
• 제31권3호
• /
• pp.203-207
• /
• 2009

최근 산업화에 따른 다양한 신종 미량유해물질의 등장과 지속적인 오염물질의 증가로 수질오염의 심각성과 그 위해성에 대한 관심이 커지고 있다. 특히 응집공정을 통하여 유기오염물질 제거를 좀 더 효율적으로 증가시킬 수 있는 방법들이 모색되고 있다. 본 연구는 도시하수 및 호소수를 대상으로 실험하였다. 응집공정에 사용하기 위해 응집 보조제로서 사용될 수 있는 지르코늄 실리케이트($ZrSiO_4$)의 특성을 연구 하였다. 응집공정에서의 지르코늄 실리케이트의 주입방법에 따른 유기물 제거율을 PDA (Photometric Dispersion Analyzer)를 통하여 평가하였다. 지르코늄 실리케이트는 pH 7에서 zeta-potential이 -32.22 mv였고 산성에 가까울수록 낮은 음(-)전하 값을 보였으며 지르코늄 실리케이트를 주입하지 않은 도시하수보다 주입하였을 때 $UV_{254}$ 값이 더 높은 특성을 나타내었다. 또한 PDA실험을 통하여 확인한 결과 지르코늄 실리케이트의 주입은 floc의 성장을 도와주는 것을 확인할 수 있었다. Alum을 이용한 응집공정에 대한 지르코늄 실리케이트의 주입방법을 선 주입, 동시 주입, 후 주입의 3가지 방법으로 실험을 수행하였다. 실험 결과 Alum과 지르코늄 실리케이트를 함께 주입한 경우 Alum을 단독으로 주입한 경우보다 유기물 제거율이 15% 이상 증가하였다. 특히 Alum 20 mg/L과 지르코늄 실리케이트 10 mg/L를 함께 사용한 경우 90% 이상의 높은 유기물제거율을 보였다. PAC (Poly Aluminium Chloride)와 PACS (Poly Aluminium Chloride Silicate)를 응집제로 이용하는 경우에도 지르코늄 실리케이트를 함께 주입 시 $COD_{Cr}$의 제거효율이 15% 이상 향상되었다. 결과적으로 지르코늄 실리케이트를 응집제와 동시에 주입한 방법이 전, 후로 주입한 경우보다 $COD_{Cr}$ 제거효율이 5~10% 높게 나타났으나, 용존성 물질은 시주입 시, 더 낮은 제거효율을 보였다.