• Food Science of Animal Resources
• /
• v.43 no.2
• /
• pp.220-231
• /
• 2023

Although omega-3 fatty acids including docosahexaenoic acid (DHA) contain various health-promoting effects, their poor aqueous solubility and stability make them difficult to be induced in dairy foods. The aims of this research were to manufacture casein derivative-based delivery system using acid-induced gelation method with glucono-σ-lactone and to investigate the effects of production variables, such as pH and charged amount of linoleic acid, on the physicochemical properties of delivery systems and oxidative stability of DHA during storage in model milk. Covalent modification with linoleic acid resulted in the production of casein derivatives with varying degrees of modification. As pH was reduced from 5.0 to 4.8 and the charged amount of linoleic acid was increased from 0% to 30%, an increase in particle size of casein derivative-based delivery systems was observed. The encapsulation efficiency of DHA was increased with decreased pH and increased charged amount of linoleic acid. The use of delivery system for DHA resulted in a decrease in the development of primary and secondary oxidation products. An increase in the degree of modification of casein derivatives with linoleic acid resulted in a decrease in the formation of primary and secondary oxidation products than of free DHA indicating that delivery systems could enhance the oxidative stability of DHA during storage in model milk. In conclusions, casein derivatives can be an effective delivery system for DHA and charged amount of linoleic acid played a key role determining the physicochemical characteristics of delivery system and oxidative stability of DHA.

• Food Science of Animal Resources
• /
• v.30 no.1
• /
• pp.95-101
• /
• 2010

Folate loaded WPI (whey protein isolate) nanoparticles were prepared using the cold-induced gelation process. The aim of this work was to investigate the effects of process parameters, such as the concentration of the WPI solution, pH, temperature, etc, on the properties of nanoparticles. The results show that the smallest nanoparticles were obtained when a WPI concentration of 1% was used at a pH of 8.0 (<330 nm). In the case of the concentration of $CaCO_3$, the smallest particles were obtained at a concentration of 5 mM. Alginate produced the smallest mean size with the narrowest particle size distribution, while the largest particles were prepared with k-carrageenan. As the w:o ratio increased, the mean particle size also increased. When the release profile was analyzed, the particles were shown to be stable for more than 6 h at a pH of 1.2, where almost all of the folic acid was released within 2 h in the dissolution media of PBS at a pH of 7.4. Thus, the process parameters appear to be important factors that affect the properties of nanoparticles.

• Food Science of Animal Resources
• /
• v.30 no.5
• /
• pp.746-754
• /
• 2010

Response surface methodology was adopted to model and optimize the effects of microbial transglutaminase (TG) and calcium alginate (CA) systems of various ratios on the gelation characteristics of porcine myofibrillar protein (MP) at various salt levels. The CA system consisting of sodium alginate (SA), calcium carbonate (CC) and glucono-$\delta$-lactone (GdL) showed no remarkable changes in the salt-soluble fraction, and only minor effects on electrostatic interactions were observed. Increasing CA concentration caused acid-induced hydrophobic interactions in MPs, resulting in increased MP gel strength. The TG system, containing TG and sodium caseinate (SC), induced cold-set MP gelation by formation of covalent bonding. The main advantage of the combined system was a higher cooking yield when the MP gel was heated. These results indicated that 0.7% TG combined with 0.8% CA system can form a viscoelastic MP gel, regardless of salt levels.

• Journal of Ginseng Research
• /
• v.45 no.2
• /
• pp.236-245
• /
• 2021

Background: Red ginseng (RG) extract, especially ginsenoside Rg1 and Rb1 fractions has been reported to have antithrombotic activities. However, gastric instability and low intestinal permeability are considered to be obstacles to its oral administration. We hypothesized that stability, permeability, and activities of RG might be improved by encapsulation within nanoparticles (NPs) prepared with antithrombotic coating materials. Methods: RG-loaded chitosan (CS) NPs (PF-NPs) were prepared by complex ionic gelation with the antithrombotic wall materials, polyglutamic acid (PGA), and fucoidan (Fu). The concentrations of PGA (mg/mL, X₁) and Fu (mg/mL, X₂) were optimized for the smallest particle size by response surface methodology. Antithrombotic activities of RG and PF-NPs were analyzed using ex vivo and in vivo antiplatelet activities, in vivo carrageenan-induced mouse tail, and arteriovenous shunt rat thrombosis models. Results: In accordance with a quadratic regression model, the smallest PF-NPs (286 ± 36.6 nm) were fabricated at 0.628 mg/mL PGA and 0.081 mg/mL Fu. The inhibitory activities of RG on ex vivo and in vivo platelet aggregation and thrombosis in in vivo arteriovenous shunt significantly (p < 0.05) increased to approximately 66.82%, 35.42%, and 38.95%, respectively, by encapsulation within PF-NPs. For an in vivo carrageenan-induced mouse tail thrombosis model, though RG had a weaker inhibitory effect, PF-NPs reduced thrombus significantly due to the presence of PGA and Fu. Conclusion: PF-NPs contributed to improve the activities of RG not only by nanoencapsulation but also by antithrombotic coating materials. Therefore, PG-NPs can be suggested as an efficient delivery system for oral administration of RG.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.35 no.4
• /
• pp.309-314
• /
• 2002

Rhtological properties of surimi gel from white fishes by acid (acid surimi) and alkali (alkali surmi) process and effect of chemicals on gelation were investigated by punch and dynamic tests. The breaking force and deformation values of heat-induced gel of acid surimi were less than their values of alkali and conventional surimi gel, and whiteness was greatly decreased, Gel point of acid surimi was decreased but it of alkali surimi was increased with increasing moisture content in the range of 80 to $85\%$. Storage modulus of acid surimi was the highest vaule in pH 6.8, but that of alkali surimi showed high value at neutral and slightly alkali pH. Propylene glycol increased storage modulus in $20\~50^{\circ}C$, hut urea and 2-mercaptoethanol suppressed it. Potassium bromide improved storage modulus in $20~80^{\circ}C$, The results suggest that alkai process is used for making surimi instead of conventional method.

• Journal of Pharmaceutical Investigation
• /
• v.25 no.2
• /
• pp.153-161
• /
• 1995

Alginic acid is a hydrophilic , colloidal polysaccharide obtained from cell wall of seaweed or brown algae and has a broad range of applications. Alginlc acid becomes alginate gel bead due to its cation-induced gelation. Dried alginate beads can be reswollen according to environmental pH. The purpose of this paper is to explore the possible applicability of alginate beads as an oral controlled release system of ibuprofen. In this experiment ibuprofen was incorporated in alginate beads and alginate beads were treated with various methods. Ibuprofen release from alginate beads in phosphate buffer (pH 7.4) was laster than in distilled water and dilute HCl. The release of ibuprofen was more sustained in bead than simple mixture and coprecipitate of ibuprofen and sodium alginate. The dissolution rate of ibuprofen was decreased in using of bead that hardened with formaldehyde. The dissolution rate of the drug from the bead was the fastest in 12 hour dried beads, 1.5%-sodium alginate concentration and 1%-calcium chloride concentration. Sodium alginate bead can be used as a sustaind release drug delivery system of water-insoluble drugs.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.42 no.1
• /
• pp.75-85
• /
• 2016

Pectin, a naturally occurring polysaccharide, has in recent years attracted considerable attention. Its benefits are increasingly appreciated by scientists and consumers due to its safety and usefulness. The chemistry and gel-forming characteristics of pectin have enabled to be used in pharmaceutical industry, health promotion and treatment. Yet, it has been rarely used in cosmetics because of its incompatibility with many cosmetic ingredients, including alcohols, and unstable viscosity of pectin gels under various pH and salt conditions. However, low-molecular-weight pectin oligomers have excellent biological activities, and depolymerization of pectin to produce cosmetic ingredients would be very useful. In this study, we attempted the development of cosmetic ingredients using pectin with an excellent effect on human skin. We developed a bio-conversion process that uses enzymatic hydrolysis to produce pectin hydrolysates containing mainly low-molecular-weight pectin oligomers. Gel permeation chromatography was used to determined the ratio of hydrolysis. The molecular weight of the pectin hydrolysates obtained varied between 200 and 2,700 Da. The two newly developed low-molecular-weight pectin hydrolysates, LMPH A and B, had higher anti-oxidative activities than pectin or D-galacturonic. Exposure to UVB radiation induces apoptotic cell death in epidermal cells. Annexin V binding and propidium iodide uptake were measured by flow cytometry to evaluate UVB-induced cell death in HaCaT cells. Both LMPH A and B reduced UVB-induced cell death and increased cell proliferation by 22% and 30% at 0.5% concentration respectively, while pectin had no significant activity. In conclusion, this study suggests that the newly developed low-molecular-weight pectin hydrolysates can be used as safe and biologically active cosmetic ingredients.