• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2009년도 추계학술대회 논문집
• /
• pp.166-169
• /
• 2009

Poly(benzimidazole-co-aniline) (PBIANI), a self-crosslinked, net-structured, proton conducting polymer has been synthesized for the membrane of high temperature proton exchange membrane fuel cells (HT-PEMFC) with improved proton conductivity and mechanical strength. The stress at break (26$\pm$3MPa)and proton conductivity (167 mS cm-1)of the phosphoric acid doped PBIANI (DPBIANI)membrane is much higher than those of other doped polybenzimidazole(PBI) type membranes.

• Mass Spectrometry Letters
• /
• 제2권1호
• /
• pp.20-23
• /
• 2011

The purpose of this study is to investigate the in vitro metabolism of hesperetin, a bioflavonoid. Hesperetin was incubated with rat liver microsomes in the presence of NADPH and UDP-glucuronic acid for 30 min. The reaction mixture was analyzed by liquid chromatography-ion trap mass spectrometer and the chemical structures of hesperetin metabolites were characterzed based on their MS/MS spectra. As a result, a total of five metabolites were detected in rat liver microsomes. The metabolites were identified as a de-methylated metabolite (eriodictyol), two hesperetin glucuronides, and two eriodictyol glucuronides.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2009년도 9th International Meeting on Information Display
• /
• pp.1557-1559
• /
• 2009

By using optimum doping ratio (10 ~ 20 wt%) of glycerol, the power conversion efficiency (PCE) of organic photovoltaic devices based on poly (3-hexylthiophene) and phenyl-$C_{61}$-butyric acid methyl ester was dramatically increased from 3.23% to 5.03%. Finally, semitransparent organic photovoltaic devices including glycerol doped poly (3,4-ethylenedioxy-thiophene):poly (styrene sulfonate) and thin Ag (< 1 nm) buffer layer typically have shown PCE > 3% with transmittance > 30% in visible ranges.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 추계학술대회 논문집
• /
• pp.529-532
• /
• 2001

We synthesized polypyrrole (PPy) by electrolysis of the pyrrole monomer solution containing support electrolyte KCl and/or p-toluene sulfonic acid sodium salt (p-TS). The electrochemical behavior was investigated using cyclic voltammetry and AC impedance. In the case of using electrolyte p-75, the redox potential was about -0.3 V vs. Ag/AgCl reference electrode, while the potential was about 0 V for using electrolyte KCl. It is considered as the backbone forms a queue effectively by doping p-TS Therefore, it is possible to be arranged regularly. That leads to improvement in the electron hopping. The AC impedance plot gave a tent of betterment of mass transport. PPy doped with p-TS has improved in mass transport, or diffusion. That is because the PPy doped with p-TS has a good orientation, and is more porous than PPy with KCl.

• Mass Spectrometry Letters
• /
• 제14권3호
• /
• pp.104-109
• /
• 2023

Anabolic-androgenic steroids (AAS) are used illegally to enhance muscle development and increase strength and power. In this study, a reliable, and sensitive quantitative method was developed and validated using heptafluorobutyric acid anhydride (HFPA) derivatives for the simultaneous detection of prohibited AAS (testosterone [TS], boldenone [BD], 5α-estrane-3β,17α-diol [EAD]) using gas chromatography-tandem mass spectrometry (GC-MS/MS). For processing the samples, solid phase extraction, methanolic hydrolysis, and liquid-liquid extraction were used. For detection using mass spectrometry, the multiple reaction monitoring (MRM) mode was used with the electron ionization (EI) positive mode. The method was evaluated for selectivity, linearity, lower limit of quantification, intra- and inter-day precision, accuracy, and stability. The results showed that the method was accurate and reproducible for the quantitation of the three steroids. The developed method was finally applied to the analysis of a suspect gelding urine sample received from the Asian Quality Assurance Program (AQAP).

• 한국산학기술학회논문지
• /
• 제12권10호
• /
• pp.4660-4665
• /
• 2011

리튬 흡착제용 신규 전구체인 $Li_{1.6}(MnM)_{1.6}O_4$ (M=Cu, Ni, Co, Fe)을 수열법에 의해 합성한 후에, 물리화학적인 성질을 고찰하였다. XRD와 HRTEM을 이용한 분석 결과로부터 Co를 도핑한 경우에는 본래의 스피넬 구조가 유지되는 반면에, Cu, Ni, Fe를 도핑한 경우에는 구조적인 변화가 발생하는 것을 확인하였다. Co 도핑에 의해 확인된 구조의 안정화는 산처리에 의해 리튬을 침출시킨 후에도 유지되었다. 해수에 함유된 리튬을 흡착하는 효율은 Co가 도핑된 망간 산화물 인 $Li_{1.6}[MnCo]_{1.6}O_4$가 상업적으로 적용 가능한 $Li_{1.33}Mn_{1.67}O_4$ 보다 우수한 특성을 나타내었다. 해수 1g으로부터 흡착되는 Li의 양은 $Li_{1.6}[MnCo]_{1.6}O_4$를 사용했을 경우에 35mg이었고, $Li_{1.33}Mn_{1.67}O_4$을 사용했을 경우에는 16mg 이었다.

• Progress in Superconductivity
• /
• 제9권1호
• /
• pp.62-67
• /
• 2007

The effects of the heat-treatment temperature on the carbon (C) substitution amount, full width at half maximum (FWHM) value, critical temperature ($T_c$), critical current density ($J_c$) have been investigated for 10 wt % malic acid ($C_4H_6O_5$)-doped $MgB_2/Fe$ wires. All the samples were fabricated by the in-situ powder-in-tube (PIT) method and heat-treated within a temperature range of $650^{\circ}C$ to $1000^{\circ}C$. As the heat-treatment temperature increased, it seemed that the lattice distortion was increased by a more active C substitution into the boron sites from the malic acid addition. These increased electron scattering defects seemed to enhance the $J_c-H$ properties in spite of an improvement in the crystallinity, such as a decrease of the FWHM value and an increase of the $T_c$. Compared to the un-doped wire heat-treated at $650^{\circ}C$ for 30 min, the $J_c$ was enhanced by the C doping in a high-field regime. The wire heat-treated at $900^{\circ}C$ resulted in a higher magnetic $J_c$ of approximately $10^4\;A/cm^2$ at 5 K and 8 T.

• Progress in Superconductivity
• /
• 제12권2호
• /
• pp.75-81
• /
• 2011

We report on the progress that has been made in developing $MgB_2$ superconducting wires and tapes for commercialization and research efforts. A number of techniques have been developed to overcome the obstacle posed by the poor critical current density ($J_c$) of pristine $MgB_2$. Chemical doping has proved to be the effective way to modify and enhance the superconducting properties, such as the $J_c$ and the irreversibility field ($B_{irr}$). More than 100 different types of dopants have been investigated over the past 8 years. Among these, the most effective dopants have been identified to be SiC and malic acid ($C_4H_6O_5$). The best results, viz. a $B_{irr}$ of 22 T and $J_c$ of $30,000\;A{\cdot}cm^{-2}$ at 4.2 K and 10 T, were reported for malic acid doped $MgB_2$ wires, which matched the benchmark performance of commercial low temperature superconductor wires. In this work, we discuss the progress made in $MgB_2$ conductors over the past few years at the University of Wollongong, Hyper Tech Research, Inc., and Ohio State University.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2004년도 추계학술대회 논문집 Vol.17
• /
• pp.280-284
• /
• 2004

Multicrystalline silicon wafers were textured in an alkaline bath, basically using sodium hydroxide and in acidic bath, using mainly hydrofluoric acid (HF), nitric acid $(HNO_3)$ and de-ionized water (DIW). Some wafers were also acid polished for the comparative study. Comparison of average reflectance of the samples treated with the new recipe of acidic solution showed average diffuse reflectance less than even 5 percent in the optimized condition. Solar cells were thus fabricated with the samples following the main steps such as phosphorus doping for emitter layer formation, silicon nitride deposition for anti-reflection coating by plasma enhanced chemical vapor deposition (PECVD) and front surface passivation, screen printing metallization, co-firing in rapid thermal processing (RTP) Furnace and laser edge isolation and confirmed >14 % conversion efficiency from the best textured samples. This isotropic texturing approach can be instrumental to achieve high efficiency in mass production using relatively low cost silicon wafers as starting material.

• 공업화학
• /
• 제5권5호
• /
• pp.764-771
• /
• 1994

친핵성용매하에서 p-toluenesulfonic acid나 bezensulfonic acid와 같은 유기산을 지지전해질 겸 dopant로 사용하여 전도성 Polypyrrole필름을 전해중합하였고 분해 특성과 기계적 물성증가에 대하여 고찰하였다. Dimethyformamide/p-toluenesulfonic acid에서 합성한 polypyrrole 필름이 전도도 10-40S/cm, 인장강도 $25N/mm^2$. 연신율은 10%로 가장 좋은 특성을 나타내었다. 또한 전해중합시 최적 조건은 0.5M의 pyrrole과 0.5M의 p-toluenesulfonic acid를 첨가하여 정전류법에서는 $2mA/cm^2$의 전류밀도가, 정전위법으로는 0.9V vs. $Ag/Ag^+$에서 중합할 때였으며 생성된 필름은 공기중에서 안정하였고 도핑, 탈-도핑이 가역적이어서 2차 전지로서의 특성을 갖고 있었다. 온도에 따른 분해과정이 1차 반응으로 dopant 음이온이 분해반응에 관여하지 않아 산화안정성이 좋았으며 분해활성화 에너지는 $1.01JK^{-1}mol^{-1}$, $25^{\circ}C$에서의 분해속도상수는 $3.1{\times}10-7min^{-1}$였다. 여러 가지 host polymer와의 composite를 검토한 결과 인장강도는 50%, 연신율은 100% 정도로 기계적 물성을 증가시킬 수 있었다.