• Horticultural Science & Technology
• /
• v.34 no.1
• /
• pp.24-31
• /
• 2016

This study investigated the effects of flower and fruit thinning agents on fruit set and harvested fruit quality attributes in 'Gamhong' apples. Lime sulfur, MaxCel (1.9% BA), and Fruitone (3.5% NAA) were applied either at post-bloom or fruitlet stages to mature 'Gamhong/M.9' trees. In 2011, the numbers of fruits per cluster in terminal flowers were 1.74, 0.82, and 1.15 for the control, lime sulfur, and Maxcel (applied at 10-mm fruit stage) treatments, respectively. The percentages of single fruit per cluster were 36.0, 47.9, and 48.7% for the control, lime sulfur, and Maxcel (10 mm) treatments, respectively, while the percentages of clusters with three fruits per cluster were 22.9, 1.4, and 5.8%. In lateral flowers, fruit numbers per cluster were 1.20, 0.36, and 0.50 for the control, lime sulfur, and Maxcel (10 mm) treatments, respectively. In 2012, all the thinning treatments showed a positive effect on flower and fruit thinning, compared with the control. Moreover, the treatment with thinning agents did not affect fruit quality. Overall, the results suggest that a single application of flower or fruit thinning agents would be sufficient, rather than the mixed application of thinning agents, based on the observed decrease in fruit setting.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.45 no.10
• /
• pp.1525-1531
• /
• 2016

The objective of the present study was to investigate the rheological properties of potato starch cross-linked with different concentrations (0, 0.125, 0.25, and 0.5%, w/v) of cross-linking agents (10 g of adipic acid and 40 g of acetic anhydride). Cross-linked potato starch dispersions showed shear-thinning behaviors (n=0.43~0.63) at $25^{\circ}C$. Apparent viscosity (${\eta}_{a,100}$), consistency index (K), and yield stress (${\sigma}_{oc}$) significantly increased with an increase in the concentrations of cross-linking agents from 0.125 to 0.5% (w/v). Storage modulus (G') and loss modulus (G'') increased, whereas complex viscosity (${\eta}^*$) was reduced with increasing frequency (${\omega}$) from 0.63 to 62.8 rad/s. Magnitudes of G' and G'' for cross-linked potato starch were significantly increased with an elevation in the concentrations of cross-linking agents. G' values of cross-linked potato starches were significantly higher than G'', indicating that the starches had more elastic properties than viscous properties. Cox-Merz rule was not applicable to potato starch dispersions.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.24 no.3
• /
• pp.311-316
• /
• 2008

Calcium phosphate cement (CPC) has been used as bone substitute successfully due to good biocompatibility and osteoconductivity. One of the important mechanical characteristics of CPC is flowablility, which can be evaluated by measuring rheological parameters. However, there have been few studies that measured rheological properties of CPC. The purpose of this study was to evaluate the rheological properties of CPC paste mixed with 2 kinds of setting solutions, 2% hydroxyprophyl methylcellulose (HPMC) and 35% polyacrylic acid (PAA). The CPC used was dicalcium phosphate dihydrate (DCPD). Rheological properties of CPC paste were measured using rheometer. The statistical analysis was carried out with Mann-whitney test with Bonferronis collection. CPC with both setting solutions showed shear thinning behavior. CPC with 2% HPMC showed signigicantly higher complex viscosity than CPC with 35% PAA(p<0.05).

• International Journal of Industrial Entomology and Biomaterials
• /
• v.22 no.1
• /
• pp.5-10
• /
• 2011

The effect of sample handling condition on the rheological measurement of regenerated silk fibroin formic acid solution using parallel plate geometry was investigated. In case of loading method, the loading by pouring sample solution resulted in the best reproducibility of rheological measurement. Loading with spoon showed a high variance of viscosity value at low shear rate region ($0.01{\sim}1sec^{-1}$) while loading with syringe exhibited a low reproducibility of viscosity at high shear region ($1{\sim}100sec^{-1}$) with a disappearance of shear thinning phenomenon. It was revealed that the sample loading with small extra amount lead to the most reproducible result. The sample loading with the exact amount for the measuring plate resulted in a lack of reproducibility of high shear viscosity, while the loading with large extra volume produced a limited consistency of low shear viscosity. It was turned out that 3 min. of waiting time before measurement was the optimum condition for reliable result. When the waiting time was less than 1 min., the low shear viscosity was obtained with a lack of consistency. On the other hand, the sample solution started drying when the waiting time increased up to 5 min.

• Food Science of Animal Resources
• /
• v.43 no.3
• /
• pp.540-551
• /
• 2023

Milk protein concentrate (MPC) is widely used to enhance the stability and texture of fermented dairy products. However, most research has focused on yogurt products, and the effects of MPC on sour cream characteristics remain unknown. Therefore, we investigated the effects of different MPC levels (0%, 1%, 2%, and 3% w/w) on the rheological, physicochemical, microbiological, and aroma characteristics of sour creams in this study. We found that MPC supplementation stimulated the growth of lactic acid bacteria (LAB) in sour creams, resulting in higher acidity than that in the control sample due to the lactic acid produced by LAB. Three aroma compounds, acetaldehyde, diacetyl, and acetoin, were detected in all sour cream samples. All sour creams showed shear-thinning behavior (n=0.41-0.50), and the addition of MPC led to an increase in the rheological parameters (η_a,50, K, G', and G"). In particular, sour cream with 3% MPC showed the best elastic property owing to the interaction between denatured whey protein and caseins. In addition, these protein interactions resulted in the formation of a gel network, which enhanced the water-holding capacity and improved the whey separation. These findings revealed that MPC can be used as a supplementary protein to improve the rheological and physicochemical characteristics of sour cream.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.21 no.9
• /
• pp.835-843
• /
• 2008

We have fabricated the source-drain electrodes for OTFTs by screen printing method and manufactured Ag pastes as conductive paste. To obtain excellent conductivity and screen-printability of Ag pastes, the dispersion characteristics of Ag pastes prepared from two types of acryl resins with different molecular structures and Ag powder treated with caprylic acid, triethanol amine and dodecane thiol as surfactant respectively were investigated. The Ag pastes containing Ag powder treated with dodecane thiol having thiol as anchor group or AA4123 with carboxyl group(COOH) of hydrophilic group as binder resin exhibited excellent dispersity. But, Ag pastes(CA-41, TA-41, DT-41) prepared from AA4123 fabricated the insulating layer since the strong interaction between surface of Ag powder and carboxyl group(COOH) of AA4123 interfered with the formation of conduction path among Ag powders. The viscosity behavior of Ag pastes exhibited shear-thinning flow in the high shear rate range and the pastes with bad dispersion characteristic demonstrated higher shear-thinning index than those with good dispersity due to the weak flocculated network structure. The output curve of OTFT device with a channel length of 107 ${\mu}m$ using screen-printed S-D electrodes from DT-30 showed good saturation behavior and no significant contact resistance. And this device exhibited a saturation mobility of $4.0{\times}10^{-3}$ $cm^2/Vs$, on/off current ratio of about $10^5$ and a threshold voltage of about 0.7 V.

• Preventive Nutrition and Food Science
• /
• v.22 no.3
• /
• pp.223-230
• /
• 2017

The purposes of this study were to produce polysaccharides from red pepper stems using different extraction methods and evaluate their chemical composition, in vitro biological capacities, and rheological properties. Two polysaccharides were extracted from red pepper stems using an autoclave and alkali treatments, and the extracts were named PAU and PAL, respectively. The contents of total phenolics and flavonoids were significantly higher in PAU than those in PAL. PAU exhibited greater scavenging activities on 2,2-diphenyl-1-picrylhydrazyl radicals, 2,2'-azino-bis(3-ethylbenzothiazoline-6-sulfonic acid) diammonium salt radicals, superoxide radicals, and nitrite compared to PAL, suggesting that PAU served as better antioxidants. Similarly, in vitro inhibitory abilities against carbohydrate hydrolyzing enzymes of PAU were higher than those of PAL. Steady shear rheological analysis demonstrated that PAU showed higher psuedoplastic shear-thinning behavior compared to PAL. Based on the results from dynamic shear rheological properties, it was found that both samples had predominantly viscous behavior rather than elastic behavior.

• Journal of the Korean institute of surface engineering
• /
• v.43 no.5
• /
• pp.248-254
• /
• 2010

Porous $Al_2O_3$ film can be utilized as template for fabrication of nano-structured materials. Porous anodic alumina layer as template was prepared by anodization of aluminum in oxalic acid, and the pore diameter and barrier-type alumina layer can be controlled for proper anodizing parameter by widening process in $H_3PO_4$ solution. The $SiO_2$ nanodot and Ni nanowire was fabricated using anodic alumina template and their characteristics were investigated using SEM and TEM with EDS. Especially the growth mechanism of $SiO_2$ nanodot in alumina membrane compared with thinning of the alumina barrier layer during anodization was also investigated.

• Journal of Soil and Groundwater Environment
• /
• v.9 no.1
• /
• pp.1-11
• /
• 2004

Foam reduces the mobility of gas phase in porous media to overcome gravity override and to divert acid into desired layers in the petroleum industry and to enhance the efficiency of environmental remediation. Recent experimental studies on foam show that foam exhibits a remarkably different flow rheology depending on the flow regime. This study, for the first time, focuses on the issues of foam diversion process under the conditions relevant to groundwater remediation, combining results from laboratory linear-flow experiments and a simple numerical model with permeability contrasts. Linear flow tests performed at two different permeabilities (k = 9.1 and 30.4 darcy) confirmed that two flow regimes of steady-state strong foams were also observed within the permeability range of shallow geological formations. Foam exhibited a shear-thinning behavior in a low-quality regime and near Newtonian rheology in a high-quality regime. Data taken from linear flow tests were incorporated into a simple numerical model to evaluate the efficiency of foam diversion process in the presence of permeability contrasts. The simple model illustrated that foam in the high-quality regime exhibited a successful diversion but foam in the low-quality regime resulted in anti-diversion, implying that only foam in the high-quality regime would be applicable to the diversion process. Sensitivity study proved that the success of diversion process using foam in the high-quality regime was primarily controlled by the limiting capillary pressures (${P_c}{^*}$) of the two layers of interest. Limitations and implications are also discussed and included.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.35 no.2
• /
• pp.103-110
• /
• 2009

The objective of this study is to analyze the influences of fatty alcohols and fatty acids on rheological properties of oil in water (O/W) emulsions using viscosity and rheograms. As the chain length of fatty alcohols and fatty acids lengthened, the viscosity of emulsions was increased. The influence of fatty alcohols on viscosity enhancement was stronger than that of fatty acids. Both stearyl alcohol and cetearyl alcohol, which have carbon chain length similar to lipophilic portion of surfactant used in emulsion preparation, had showed the best increase in viscosity of O/W emulsions. O/W emulsions prepared with fatty alcohols and fatty acids were pseudo-plastic fluid and they showed shear thinning behaviour like as the common cosmetic emulsions. O/W emulsions prepared with cetyl alcohol, cetearyl alcohol and stearyl alcohol were thixotropic fluids and thixotropy increased with an increase in the concentration of fatty alcohols and fatty acids. Also O/W emulsions prepared with fatty alcohols were more thixotropic than those prepared with fatty acids. For the sake of viscosity increase related to O/W emulsions stability and spreadability enhancement related to payoff, it is thought that fatty alcohols are more useful than fatty acids in the O/W emulsions as the emulsion stabilizer.