• 한국포장학회지
• /
• 제22권3호
• /
• pp.79-84
• /
• 2016

A kimchi container actively controlling $CO_2$ concentration by timely flushing of $CO_2$ gas was structured and tested in its capability and effectiveness because high $CO_2$ concentration enhances the sensory flavor of the product. The inlet and outlet valves of $CO_2$ gas were programmed to open and close allowing synchronous vent/$CO_2$ flush according to the requirements of its dissolution in the contained kimchi. During the chilled storage, the headspace of container could be maintained at desired high $CO_2$ concentration providing the preferred kimchi in sensory quality compared to control of the conventional container. However, there was no significant difference between the high $CO_2$ container and control (container simply closed with air) in kimchi quality attributes of pH, titratable acidity, total viable bacterial count, Lactobacillus sp. count and Leuconostoc sp. count. The flow rate and time interval of $CO_2$ flushing need to be adjusted considering the kimchi amount, headspace volume and ripening time. The designed system has potential to be applied in refrigerator appliances in homes and food service industry.

• 접착 및 계면
• /
• 제4권2호
• /
• pp.21-29
• /
• 2003

Hot AC anodising has been evaluated us pre-treatment for aluminium prior to structural adhesive bonding. Phosphoric and sulphuric acid hot AC anodising showed very promising adhesion promoter capabilities with durability comparable with the best standard DC anodising procedures. AC anodising does not required etching prior to anodising and offers u pre-treatment time down to 20 seconds. The interface/interphase between the aluminium substrate and the adhesive was investigated in order to get a better understanding of the involved adhesion mechanisms and to explain the long-tenn properties. The alkaline medium formed at the oxide layer/adhesive interface has been shown to induce a partial dissolution of the oxide layer leading to the formation of metallic ions which diffuse in the adhesive (EPMA measurements). The effect of diffusion of the Al ions on adhesion and joint durability is still uncertain but studies showed that pre-bond moisture affected the joints durability and to some extent the diffusion length. specially for DC anodised samples. So far no direct correlation could be established between the diffusion length d and the joints durability but new trials with better control over the elapsed time between bonding and adhesive curing are expected to help getting a better understanding of the involved mechanisms.

• 대한가정학회지
• /
• 제18권2호
• /
• pp.15-21
• /
• 1980

Three kinds of soybean curd were prepared with three coagulants such as calcium chloride, magnesium chloride and glucono delta lactone. The mineral contents of the three soybean curds were analyzed before soaking and after various lengths of soaking(1/2 hour, 1 hour, 2 hours, and 2 hours(water changed after 1/2 hour)). Results therefrom were as follows: 1. Before the three soybean cured were soaked, their moisture contents were 79-83g/%. The ash contents were 5.04g% in the soybean curd made with CaCl_{2}4.42g/% in the soybean curd prepared with MgCl_{2} and 3.86g/% in the soybean curd coagulated by glucono delta lactone. an analysis of calcium, magnesium and phosphorous contents showed that each element had a greater concentration in the soybean curds made with divalent mineral salts than in the soybean curd made with acid. 2. Changes taking place in the mineral contents of the soybean curds according to different soaking times were examined. The mineral contents tended to decease in process of soaking time. The soybean curds showed the highest rate of mineral dissolution after one hour of soaking, and then they tended to reabsorb minerals. When the soybean curds were soaked I freshly changed water for one hour and 30 minutes, their mineral contents indicated a greater diminishing trend but no significant difference was noticed among the different kinds of soybean curd. In case coagulant has been used excessively, it is necessary to soak the bean curds for about one hour to get the coagulant dissolved.

• 한국분말재료학회지
• /
• 제24권1호
• /
• pp.29-33
• /
• 2017

Titanium carbide (TiC) powders are successfully synthesized by carburization of titanium hydride ($TiH_2$) powders. The $TiH_2$ powders with size lower than $45{\mu}m$ (-325 Mesh) are optimally produced by the hydrogenation process, and are mixed with graphite powder by ball milling. The mixtures are then heat-treated in an Ar atmosphere at $800-1200^{\circ}C$ for carburization to occur. It has been experimentally and thermodynamically determined that the de-hydrogenation, "$TiH_2=Ti+H_2$", and carburization, "Ti + C = TiC", occur simultaneously over the reaction temperature range. The unreacted graphite content (free carbon) in each product is precisely measured by acid dissolution and by the filtering method, and it is possible to conclude that the maximal carbon stoichiometry of $TiC_{0.94}$ is accomplished at $1200^{\circ}C$.

• 분석과학
• /
• 제5권3호
• /
• pp.269-276
• /
• 1992

An ion-exchange/conductometric method is applied for the determination of total acidity in simulated atmospheric samples. Non-$H^+$ cations and strong acid anions are enriched by the preconcentrator columns in series and eluted through the corresponding parallel suppressor units. The conductivities from each channel correspond to the concentrations of the resulting ionized species in equivalents per unit volume. The difference is the measure of acidity due to strong acids. With 5-min sampling at a flow rate of 0.3 mL/min, the detection limits for ${NH_4}^+$ and ${SO_4}^{2-}$ are 0.3 and $0.1{\mu}equiv/L$, respectively. The acidity for samples composed of various ions can be determined without significant error, usually less than 5%. The proposed method discriminates against the artifact from the $CO_2$ dissolution. Principles of acidity measurements are also presented.

• 한국방사성폐기물학회:학술대회논문집
• /
• 한국방사성폐기물학회 2003년도 가을 학술논문집
• /
• pp.650-654
• /
• 2003

원자력분야에서 방사성폐기물 처리 및 처분은 해결해야 할 중요한 문제가 된다. 보다 청정한 방법을 사용한 제염법이 요구되고 있다. 이산화탄소를 이용한 제염법은 두가지로 나눠지는데-킬레이트제를 이용한 방법과 에멀젼을 이용한 방법이다. 킬레이트제 방법은 시너지효과를 낼 수 있는 방안이 중요하다. 마이크로 에멀젼을 사용한 방법은 에멀젼 코어속에 산을 넣어 금속표면이나 토양에서 오염물질을 직접 꺼내는 방법이다. 표면제거율을 QCM을 사용하여 측정하였다. 에멀젼을 만드는데 사용된 계면활성제의 회수 방법에 대하여 아울러 논의하였다.

• 한국대기환경학회지
• /
• 제8권3호
• /
• pp.155-161
• /
• 1992

A simple, fast yet sensitive method is described for the determination of fifty elements in coal by inductively coupled plasma mass spectrometry. The method involves complete dissolution of coal with mixed acid $(HNO_3, HF, HClO_4)$ in hish pressure Teflon bomb and subsequent inductively coupled plasma mass spectrometric(ICP-MS) measurement. The accuracy of the method, being evaluated by the analysis of NIST SRMs (1632a, 1632b) is better than 20% RSD for most elements. The limits of detection defined by two times $\sigma$ (standard deviation of operational blank) are in order of sub-ppm to ppm, which are low enough to quantitate most elements. However, the determiantions for few elements such as V, As, Se are severely interfered by molecular ions such that their accurate determiantions are not possible. Analytical results for twentyon coals from eight countries including six ones world major coal producing, Korea, Japan, China, I.C.S., U.S.A., Canada, Australia, and South Africa are presented. While the results for major elements agree well with the existing ones, those for a few trace elements disagree considerably. The existing values are considerably higher. It is not possible to judge which are more accurate. However, the exisisting values are more likely to be errorous inasmuch as they are obtained without using high purity reagents and clean laboratory techniques.

• Carbon letters
• /
• 제16권2호
• /
• pp.93-100
• /
• 2015

Surface modified carbon felts were utilized as an electrode for the removal of inorganic ions from seawater. The surfaces of the carbon felts were chemically modified by alkaline and acidic solutions, respectively. The potassium hydroxide (KOH) modified carbon felt exhibited high Brunauer-Emmett-Teller (BET) surface areas and large pore volume, and oxygen-containing functional groups were increased during KOH chemical modification. However, the BET surface area significantly decreased by nitric acid ($HNO_3$) chemical modification due to severe chemical dissolution of the pore structure. The capability of electrosorption by an electrical double-layer and the efficiency of capacitive deionization (CDI) thus showed the greatest enhancement by chemical KOH modification due to the appropriate increase of carboxyl and hydroxyl functional groups and the enlargement of the specific surface area.

• Bulletin of the Korean Chemical Society
• /
• 제35권2호
• /
• pp.557-561
• /
• 2014

The aim of the present study was to improve dosing of lacosamide, a functionalized amino acid used as an antiepileptic agent, from twice daily to once daily for the convenience of patients. A sustained-release lacosamide tablet was developed and dissolution testing was employed to determine in vitro release behavior using water or buffer solutions at pH 1.2, 4.0, or 6.8. Lacosamide was released for 12 h from the sustainedrelease (SR) tablet, as compared to complete release within 1 h from an immediate-release $Vimpat^{(R)}$ tablet. Each formulation (100 mg) was orally administered to six beagle dogs and six mini-pigs under fasted conditions, and pharmacokinetic parameters such as the area under the concentration time curve ($AUC_t$), the maximum plasma concentration ($C_{max}$), and the time at which this occurred ($T_{max}$) were calculated. These results showed similar values for $AUC_t$, $C_{max}$, and $T_{max}$ following oral administration of immediate-release ($Vimpat^{(R)}$) and SR lacosamide tablets.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2005년도 하계학술대회 논문집 Vol.6
• /
• pp.42-43
• /
• 2005

본 연구에서는 Cu 슬러리에 부식방지제인 BTA를 첨가하여 슬러리내의 과수의 농도, pH 의 변화, 연마입자의 종류에 따라 연마거동에 미치는 영향과 각 chemical 변화에 따른 Cu surface의 변화를 살펴보았다. BTA (Benzotriazole, $C_6H_4C_3H$)를 첨가함으로써 본 연구에서 시행된 pH 와 과수의 변화에 상관없이 Cu-BTA film을 형성하여 Cu의 dissolution을 최대한 억제하는 것을 확인할 수 있었다. 또 그로인해 BTA를 첨가하지 않았을 때보다 얇은 passivation layer를 형성함을 알 수 있었고 contact angle도 더 높았다. 연마율의 경우에도 BTA가 첨가됨으로써 감소됨을 확인할 수 있었고 연마입자로 alumina particle을 사용한 경우에는 pH6, 과수 10vol%이상에서는 오히려 연마율이 증가하였다. fumed silica의 경우에는 hardness가 작아 mechanical적인 제거력이 낮아 BTA가 첨가되어도 연마율에는 큰 영향이 없었다.