• Korean Journal of Soil Science and Fertilizer
• /
• v.6 no.3
• /
• pp.193-197
• /
• 1973

1. Two desert perennial plant species (Lycium andersonii Gray and Atriplex confertifolia (Torr. & Frem) Wats.) were grown in soil in a glasshouse with different sources of Na ($NO_3{^-}$, $Cl^-$, $H_2PO_4{^-}$) to evaluate their effects upon cation-anion balance in the plants. 2. Each anion greatly increased in leaf with only minor, if any, interactions with other anions 3. The miliequivalent sum of anions measured (N. P. Cl), increased in each plant part with the soil applications. 4. Simultaneously there were usually modest increases in the me. sum of cations. 5. The cation-anion ratio was decreased markedly when $NaNO_3$ was added. The ratio was usually over one. 6. Maximum content of Cl and N in leaves with L. andersonii. was 13.5%, and 6.37% respectively, when each was added. 7. Sodium concentrations were higher for the Atriplex species than for L. andersonii. 8. There were some compensations among other cations as sodium was increased, so that a somewhat constant sum of cations was maintained although there were significant differences among different sources of Na. 9. L. andersonii appeared to be an accumulator of Li.

• Journal of Soil and Groundwater Environment
• /
• v.15 no.3
• /
• pp.61-68
• /
• 2010

Phytoextraction, one type of phytoremediation processes, has been widely used in the removal of heavy metals from polluted soil. This paper reviewed literature on metal uptake by plants and characterized the metal uptake by types of metals (Zn, Cu, Pb, Cd, and As), plant species, initial metal concentrations in soil and the distribution of metals in different parts of plants. The potential of metal accumulation and transport by plants was closely related to plants species, types of metals, and initial metal concentrations in soil. The plants belonging to Brassicaceae, Solanaceae, Poaceae, and Convolvulaceae families have shown the high potential capacity of Cd accumulation. The Gentianaceae, Euphorbiaceae, and Polygonaceae families have exhibited relatively high Pb uptake potential while the Pteridaceae and Cyperaceae families have shown relatively high Zn uptake potential. The Pteridaceae family could uptake a remarkably high amount of As compared with other plant families. The potential metal accumulation per plant biomass has increased with increasing initial metal concentration in soil up to a certain level and then decreased for Cd and Zn. For As, only Pteris vittata had a linear relationship between initial concentration in soil and potential of metal uptake. However, a meaningful relationship for Pb was not found in this study. Generally, the plants having high metal uptake potential for Cd or Pb mainly accumulated the metal in their roots. However, the Euphorbiaceae family has accumulated more than 80% of Pb in shoot. Zn has evenly accumulated in roots and stems except for the plants belonging to the Polygonaceae and Rosaceae families which accumulated Zn in their leaves. The Pteridaceae family has accumulated a higher amount of As in leaves than roots. The types of metals, plant species, and initial metal concentration in soil influence the metal uptake by plants. It is important to select site-specific plant species for effective removal of metals in soil. Therefore, this study may provide useful and beneficial information on metal accumulation by plants for the in situ phytoremediation.

• Nuclear Engineering and Technology
• /
• v.50 no.3
• /
• pp.356-367
• /
• 2018

A series of tests dedicated to station blackout (SBO) accident scenarios have been recently performed at the $Prim{\ddot{a}}rkreislauf-Versuchsanlage$ (primary coolant loop test facility; PKL) facility in the framework of the OECD/NEA PKL-3 project. These investigations address current safety issues related to beyond design basis accident transients with significant core heat up. This work presents a detailed analysis using the best estimate thermal-hydraulic code TRACE (v5.0 Patch4) of different SBO scenarios conducted at the PKL facility; failures of high- and low-pressure safety injection systems together with steam generator (SG) feedwater supply are considered, thus calling for adequate accident management actions and timely implementation of alternative emergency cooling procedures to prevent core meltdown. The presented analysis evaluates the capability of the applied TRACE model of the PKL facility to correctly capture the sequences of events in the different SBO scenarios, namely the SBO tests H2.1, H2.2 run 1 and H2.2 run 2, including symmetric or asymmetric secondary side depressurization, primary side depressurization, accumulator (ACC) injection in the cold legs and secondary side feeding with mobile pump and/or primary side emergency core coolant injection from the fuel pool cooling pump. This study is focused specifically on the prediction of the core exit temperature, which drives the execution of the most relevant accident management actions. This work presents, in particular, the key improvements made to the TRACE model that helped to improve the code predictions, including the modeling of dynamical heat losses, the nodalization of SGs' heat exchanger tubes and the ACCs. Another relevant aspect of this work is to evaluate how well the model simulations of the three different scenarios qualitatively and quantitatively capture the trends and results exhibited by the actual experiments. For instance, how the number of SGs considered for secondary side depressurization affects the heat transfer from primary side; how the discharge capacity of the pressurizer relief valve affects the dynamics of the transient; how ACC initial pressure and nitrogen release affect the grace time between ACC injection and subsequent core heat up; and how well the alternative feeding modes of the secondary and/or primary side with mobile injection pumps affect core quenching and ensure stable long-term core cooling under controlled boiling conditions.

• Journal of Energy Engineering
• /
• v.28 no.3
• /
• pp.18-25
• /
• 2019

In this study, in order to solve the problem of the program of calculating code input by experienced users in the power generation, the wide area energy network research group developed the local heating operation analysis program EntPLAN, which can be easily used by anyone, including scalability, with domestic technology. Therefore, the Commission intended to compare the heat sources, heat demand, and the results of operation of the combined heat plant (CHP) on the energy network through simulation with the EnetPLAN and the program A on the market. The results showed that the heat and power output on the energy network of the EnetPLAN and A programs were mostly similar in pattern in the simulation results of the heat supply and the operation method of the accumulator. This enabled the application of the simulation for the various operation modes of the cogeneration facilities existing on the energy network. It is expected that EntPLAN, which was developed with domestic technology, will be easily applied in the field in the future and will present efficient operation simulation results.

• Journal of Korean Society of Forest Science
• /
• v.90 no.1
• /
• pp.83-89
• /
• 2001

This study was conducted to test the Cd accumulation and Cd-tolerance of Pisotithus tinctorius(Pt). Pt was isolated from Pinus thunbergii forest in Muan, Chonnam Province in 1997. Pt was cultured on MMN medium supplemented with $CdSO_4{\cdot}5H_2O$ at the final concentration of 0, 0.2, 0.5, 2, and $10{\mu}g/m{\ell}$ for 40 days. Growth rate and tolerance index of the fungus were measured every week, while Cd concentration, superoxide dismutase(SOD), and glutathione reductase(GR) of the fungus were analyzed at the end of the culturing, Pt showed growth reduction in vitro at $2{\mu}g/m{\ell}$ Cd in the medium and almost stopped growth at $10{\mu}g/m{\ell}$ Cd. Tolerance index of Pt decreased with increasing Cd concentration. Cd concentration of Pt was the highest at $10{\mu}g/m{\ell}$ Cd. Activities of SOD did not show significant difference between Cd concentrations, but GR of Pt increased at $0.5{\mu}g/m{\ell}$ Cd, and decreased at $2{\mu}g/m{\ell}$ Cd. Consequently Pt could be called Cd accumulator with a tolerance mechanism to Cd. Their tolerance to Cd were expressed through the higher production of antioxidants such as GR. Pt may be used for revegetation and decontamination of soil polluted by heavy metals.