• 융합신호처리학회논문지
• /
• 제12권2호
• /
• pp.139-144
• /
• 2011

The modern digital logic technology does not yet satisfy the speed requirements of real-time DSP circuits due to synchronized operation of multiplication and accumulation. This operation degrades DSP performance. Therefore, the double-base number system (DBNS) has emerged in DSP system as an alternative methodology because of fast multiplication and hardware simplicity. In this paper, authors propose a novel multiplication architecture. One operand is an output of a flash analog-to-digital converter (ADC) in DBNS format, while the other operand is a coefficient in the IEEE standard floating-point number format. The DBNS digital output from ADC is produced through a new double base number encoder (DBNE). The multiplied output is in the format of the IEEE standard floating-point number (FPNS). The proposed circuits process multiplication and conversion together. Compared to a typical multiplier that uses the FPNS, the proposed multiplier also consumes 45% less gates, and 44% faster than the FPNS multiplier on Spartan-3 FPGA board. The design is verified with FIR filter applications.

• Nuclear Engineering and Technology
• /
• 제51권2호
• /
• pp.546-555
• /
• 2019

Since the first nuclear reactor first critical, nuclear systems has gone through four generations of history, and the fourth generation nuclear system will be truly realized in the near future. The notions of SVBR and lead-bismuth eutectic alloy coolant put forward by Russia were well received by the international nuclear science community. Lead-bismuth eutectic alloy with the ability of the better neutron economy, the low melting point, the high boiling point, the chemical inertness to water and air and other features, which was considered the most promising coolant for the 4th generation nuclear reactors. This study mainly focuses on the structural design optimization of the 4th-generation reactor coolant pump, including analysis of external characteristics, inner flow, and transient characteristic. It was found that: the reactor coolant pump with a central symmetrical dual-outlet volute structure has better radial-direction balance, the pump without guide vane has better hydraulic performance, and the pump with guide vanes has worse torsional vibration and pressure pulsation. This study serves as experience accumulation and technical support for the development of the 4th generation nuclear energy system.

• 생명과학회지
• /
• 제15권5호
• /
• pp.826-833
• /
• 2005

식물 비생육지 토양의 깊이별 중금속 함량은 S1지점의 경우 1996년 오염토양 개선사업으로 S1지점 바로 위에다 남은 광미를 복토함으로써 광미 중금속이 강우에 의해 용탈되어 토양에 축적되기 때문에 오염되고 있는 것으로 판단되었고 S2지점은 오염토양 개선사업의 효과로서 표토에서 Zn과 Pb가 토양오염 우려기준을 초과하지 않았으며 Pb의 경우 $30\∼50cm$에서 토양오염 우려기준을 초과한 것은 광맥의 영향 때문이며 구리의 경우는 광산의 채광물로서 오염 정도가 심각하였다. 생육지 토양의 중금속 함량은 같은 표고상에 위치한 광산 위 지점(SP1, SP2, SP3)에서 볼 때 SP1지점에서는 Zn의 함량이 537.5 mg/kg로 가장 높았고, SP3지점에서는 Cu와 Pb의 함량이 가장 높았는데 이는 폐광산에 복토 사업을 했더라도 아직 토양 복원이 완전히 이루어지지 않아 강우와 풍화에 의한 광미의 영향 때문인 것으로 생각되며 SP2지점은 다른 지점보다 지대가 높아 광미의 영향을 적게 받는 것으로 생각된다. 식물체내의 중금속 함량은 차즈기>쑥>억새>살갈퀴 순으로 조사되었고 식물에 의한 연간 중금속 제거율 역시 차즈기가 가장 좋은 것으로 조사되었다. 특히 차즈기는 다량의 중금속이 축적되어 있고 중금속 오염 지역에 내성이 있는 지표종으로 생각될 수 있으며 본 식물의 중금속 축적 능력에 대한 더 많은 연구가 진행되어야 할 것으로 생각된다.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2002년도 춘계학술대회 논문집
• /
• pp.134-139
• /
• 2002

Motorcycle industry, for its competitive position, depends on part design technology. This part design has a bulky amount of data and asks the accumulation of advanced technical skill and experience, and fragmentary technical application is not enough to get to the kernel of a problem. Therefore, the improvement of proper productivity - the starting point of engineering design - and useful Design Methodology for products manufacturing are needed. Thus this paper is aimed to create a program that outputs dynamic characteristics of a vehicle when the data from fully understanding on motorcycle's brake system and induced formula for brake design are inputted.

• 한국공작기계학회논문집
• /
• 제12권1호
• /
• pp.101-110
• /
• 2003

Motorcycle industry, for its competitive position, depends on part design technology. This part design has a bulky amount of data and asks the accumulation of advanced technical skill and experience, and fragmentary technical application is not enough to get to the kernel of a problem. Therefore, the improvement of proper productivity - the starting point of engineering design - and useful Design Methodology for products manufacturing are needed. Thus this paper is aimed to create a program that outputs dynamic characteristics of a vehicle when the data from fully understanding on motorcycle's brake system and induced formula for brake design are inputted. This paper is intended to show a creative design method by the thermal analysis data through FEM study and using shape design parameters derived from our programs.

• 정보학연구
• /
• 제8권2호
• /
• pp.85-91
• /
• 2005

We studied a pollution mechanism for simulation of contamination environment in industrial concentrated area of around a metropolitan that made to circulated flow in the chamber. In case of the virgin both side of EPDM or Silicon insulator, we confirmed that the pollution to much more than service insulator in the field. Also contamination of initial state of the virgin didn't falling in spite of physical outside factor easily. This study confirmed to that the silicon was too much accumulated pollution contrast to EPDM insulator from scatter(spray) point to regular interval position use the Kaolin contaminant in the chamber. There are effected to the hydrophobicity of polymer insulator due to the pollution. In ceramic insulator, we get to know that pollution is much more at the Post insulator with vertical than with horizontal setup insulator.

• Journal of Welding and Joining
• /
• 제18권3호
• /
• pp.122-130
• /
• 2000

Due to the inherent dimensional uncertainty, the tolerances accumulate in the assembly of plasma cutting torch. Tolerance accumulation has serious effect on the performance of the plasma torch. This study proposes a statistical tolerance propagation model, which is based on matrix transform. This model can predict the final tolerance distributions of the completed plasma torch assembly with the prescribed statistical tolerance distribution of each part to be assembled. Verification of the proposed model was performed by making use of Monte Carlo simulation. Monte Carlo simulation generates a large number of discrete plasma torch assembly instances and randomly selects a point within the tolerance region with the prescribed statistical distribution. Monte Carlo simulation results show good agreement with that of the proposed model. This results are promising in that we can predict the final tolerance distributions in advance before assembly process of plasma torch thus provide great benefit at the assembly design stage of plasma torch.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2005년도 ICCAS
• /
• pp.2389-2392
• /
• 2005

We present fast stereo matching algorithm using edge projection. Traditional stereo matching algorithm uses 2D template for the search of corresponding point thus it requires huge the computational cost. In this paper, we reduce the 2D search problem into 1D using edge projection along vertical and horizontal direction inside the region of interest. Also, by accumulation of edge projection along vertical and horizontal direction, the edge projection within the region of interest could simply be obtained by just subtracting two values. Experimental results show that matching algorithm using edge projection also gives comparable discriminating power compared to that of using intensity.

• 한국염색가공학회지
• /
• 제7권1호
• /
• pp.51-57
• /
• 1995

Poly-$\beta$-hydroxybutyrate(PHB) was biosynthesized using Alcaligenes sp. FL-027. Alcaligenes sp. FL-027 was cultivated by fed-batch methods, in order to promote cell growth and PHB accumulation with carbon source. The cells were first grown at 3$0^{\circ}C$ on the fermentor. The structure of biosynthesized PHB is investigated by the NMR, IR. The crystalline portions were identified through the use of DSC and X-ray diffractometer. The melting point was about 16$0^{\circ}C$ and the diffraction peaks of (020) and (110) were shown at 13$^{\circ}$ and 17$^{\circ}$, respectively.

• 한국주거학회:학술대회논문집
• /
• 한국주거학회 2003년도 정기총회 및 추계학술대회
• /
• pp.41-46
• /
• 2003

In recent days, it is usual case to extend the dwelling area to the balcony which is provided by service area. But the use of the extended area can be arisen discomfort with a view point of thermal environment by excessive heat accumulation in summer and excessive cold draft in winter. In this study, the skills were reviewed to improve the thermal environment of the extended area and evaluations were carried out. Additional heat supply by heat-convector installed at the lower end of the curtain wall can improve the thermal environment of the extended area and also arise surface temperature of the curtain wall surface. And aluminum plate installed under the floor could not improve the thermal environment but it was effective to shortening the initial heating time.