• Journal of The Korean Society of Grassland and Forage Science
• /
• v.7 no.3
• /
• pp.146-152
• /
• 1987

Sorghum cv. Pioneer 93 1, sorghum-sudangrass hybrid cv. Sioux and maize plant cv. Blizzard were assayed for toxic concentrations of nitrate-nitrogen ($NO_3$-N) and their relationship to morphological characteristics and environmental temperature in a field and phytotron trial. In the phytotron, sorghum and maize plants ranging from emergence to heading stage, were grown under different day/night temperatures of 30125, 25/20,28/18 and 1818 degree C. Nitrate-nitrogen in sorghum and maize plants was accumulated mainly in stems. Therefore nitrate concentration in the young plants was increased as development of stalks advanced and was highest at the stage of 3-4 leaves, when the plants had a leaf weight ratio 0.78-0.80 g/g plant weight. However, nitrate concentrations of the plant decreased as morphological development progressed, especially from the stage of growing point differentiation. Correlation coefficients showed a positive correlation of nitrate concentration with leaf weight ratio, leaf area ratio and specific leaf area, while plant height, dry matter percentage and absolute growth rate showed a negative association with TEX>$NO_3$-N ($P{\le}0.1$%). Cyanogenic glycosides, total nitrogen and crude protein were close associated with nitrate accumulation, and positively significant ($P{\le}0.1$%). High temperature over 30/25^{\circ}C.$ for 3 weeks increased N-uptake and dry matter accumulation, but reduced nitrate concentration. Under cold temperature below 18/8^{\circ}C.$ concentration of nitrate-N was increased in spite of its limited nitrogen uptake and plant growth.

• Journal of Plant Biology
• /
• v.22 no.1_2
• /
• pp.21-27
• /
• 1979

Sandy loam plots of pH 5.5, which was created by the reclamation of highlands in Yongin county, Kyeonggi province, was selected for the present experimental study. Sugar beet was cultured in these plots by treating them with calcium hydroxide and 3 replications to maintain pH 5.5, 6.4, 6.8, 7.2, and 7.6, respectively. The growth and yield of sugar beet were investigated and the results obtained showed a great deal of boron deficiency. The growth in its early stage was favorable in high pH plots, while no significant difference was observed in sugar content, root weight and sugar production at the time of harvest in each treated plot. The tendency of sugar accumulation appeared to be identical in terms of pattern in each treated plot; i.e. sugar was accumulated until early September but declined momentarily from the middle of September and then the sugar accumulation was resumed from the middle of October. The number of individuals in boron deficiency was larger in high pH plots and the condition of such boron deficiency was also severe. The result of analysis of boron contained in plant body revealed that the boron content of individuals caused boron deficiency by water culture and that occurred in the plots was small alike. The appearance of boron deficiency is characterized by the emergence of black stripes on the surface of the basal part of petiole, severe necrosis of young leaves in the area of growing point and severe wrinkles. Therefore it is felt necessary to pay particular attention to boron deficiency in the culture of sugar beet in our country.

• Journal of the Korean Vacuum Society
• /
• v.7 no.2
• /
• pp.112-117
• /
• 1998

TiN has been investigated as a good candidate for a diffusion barrier of Cu. Therefore, in this study, the grain boundary diffusion of Cu in TiN film was investigated by X-ray photoelectron spectroscopy(XPS). In general, TiN has a columnar grain structure. In the relatively lower temperature, less than 1/3 of the melting point, it was observed that Cu diffused into TiN mainly along the grain boundaries of TiN. The grain size of TiN was measured by atomic force microscope (AFM). In order to estimate the grain boundary diffusion constants, we used the modified surface accumulation method. The activation energy, $Q_b$ was 0.23 eV, and the diffusivity, $D_{bo}$ was $5.5\times10^{-12{\textrm{cm}^2$/sec.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.5 no.4
• /
• pp.261-265
• /
• 2003

Cold air accumulation plays a critical role in formulating daily minimum temperature in complex terrain on radiative cooling nights, and spatial interpolation can be improved by accommodating this important topoclimatic variable. Little is known about the spatial scale for computing cold air accumulation which influences daily minimum temperature. Air temperature was measured at 10-minute intervals during September 2002- February 2003 at eight locations within a 1 by 1 km hilly orchard area. Minimum temperature data for suspected radiative cooling nights were collected, and the deviations from reference observations at a near-by KMA automated weather station were calculated. A digital elevation model with a 10m cell size was used to calculate the cold air accumulation at 8 locations. Zonal averages of the cold air accumulation were computed for each location by increasing the cell radius from 1 to 10. Temperature deviations were regressed to a common logarithm of the smoothed averages of cold air accumulation to derive a linear relationship between the local temperature deviation and the site topography. The highest coefficient of determination ($r^2$ = 0.78) was found at a cell radius of 5, which corresponds to an approximately 1 ha boundary surrounding the point of interest.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.36 no.6
• /
• pp.1011-1021
• /
• 2016

This study performs the potential flood hazard analysis by applying elevation data, soil data and land use data. The susceptibility maps linked to elevation, soil and land use are combined to develop the new types of flood hazard map such as runoff production map and runoff accumulation map. For the development of the runoff production map, land use, soil thickness, permeability, soil erosion and slope data are used as runoff indices. For the runoff accumulation map, elevation, knick point and lowland analysis data are used. To derive an integrated type of flood potential hazard, a TOPSIS (The Technique for Order of Preference by Similarity to Ideal Solution) technique, which is widely applied in MCDM (Multi-Criteria Decision Making) process, is adopted. The indices applied to the runoff production and accumulation maps are considered as criteria, and the cells of analysis area are considered as alternatives for TOPSIS technique. The model is applied to Gamcheon watershed to evaluate the flood potential hazards. Validation with large scale data shows the good agreements between historical data and runoff accumulation data. The analysis procedure presented in this study will contribute to make preliminary flood hazard map for the public information and for finding flood mitigation measures in the watershed.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.10 no.6
• /
• pp.201-208
• /
• 2010

The classical iterated hash function is vulnerable to a multi-collision attack. Gauravaram et al. proposed 3C and 3C+ hash functions, in which an accumulation chain is added to usual Merkle-Damgard changing. Their goal is to design composition schemes resistant to generic attacks of Joux's type, but Joscak and Tuma have shown that 3C and 3C+ schemes are not better than Merkle-Damgard scheme in term of security against multi-collision attacks under some mild assumptions. In this dissertation, in order to increase security of 3C hash function, we proposed secure double pipe hash function which was effectively using XOR and XNOR operations per blocks of message. We seek to improve on the work of Lucks in a way. Proposed secure double pipe hash function takes resistance to multi-block collision, fixed point and pre-image attacks.

• Journal of ILASS-Korea
• /
• v.12 no.1
• /
• pp.38-44
• /
• 2007

Since the Liquid Phase LPG injection (LPLI) system has Advantages in power generation and emission characteristics compared to the mixer-type fuel-supply system, a variety of studies regarding LPLi system has been conducted and its applications are made in automobile industry. However, the heat extraction due to the evaporation of liquid fuel, causes not only a post-accumulation of fuel but also an icing phenomenon which is a frost of moisture in the air around the nozzle tip. Since there exists a difficulty in the accurate control of air fuel ratio in both fuel supply systems, it can result in poor engine performance and a large amount of harmful emissions. This research examines the characteristics of icing phenomenon and develops anti-icing bushing to prevent an icing on the surface of the injection tip. It was found that n-butane, which has a relatively high boiling point ($-0.5^{\circ}C$), was a main species of post-accumulation. Also the results show that the post-accumulation problem was allevaited the utilization of a large inner to outer bore ratio and smooth surface roughness. In addition, an icing phenomenon and its formation process were found to be mainly affected by the humidity and the temperature of inlet air in an inlet duct. Also, it was observed that an icing phenomenon is lessened using aluminum bushing whose end coincides with the end of fuel injection tip in length.

• Journal of Environmental Science International
• /
• v.21 no.12
• /
• pp.1455-1462
• /
• 2012

The vertical distributions of nitrifying bacteria in aerobic fixed biofilm were investigated to evaluate the relationship between nitrification performance and microbial community at different HRT. Fluorescent in situ hybridization (FISH) and portable ion selective microelectrode system were adopted to analyze microbial communities and ions profiles according to the biofilm depth. Cilia media packed MLE (Modified Ludzack-Ettinger) like reactor composed of anoxic, aerobic I/II was operated with synthetic wastewater having COD 200 mg/L and $NH_4{^+}$-N mg/L at HRT of 6 hrs and 4 hrs. Total biofilm thickness of aerobic I, II reactor at 4 hrs condition was over two times than that of 6 hrs condition due to the sufficient substrate supply at 4 hrs condition (6 hrs; aerobic I 380 ${\mu}m$ and II 400 ${\mu}m$, 4 hrs; aerobic I 830 ${\mu}m$ and II 1040 ${\mu}m$). As deepen the biofilm detection point, the ratio of ammonia oxidizing bacteria (AOB) was decreased while the ratio of nitrite oxidizing bacteria (NOB) was maintained similar distribution at both HRT condition. The ratio of AOB was higher at 4 hrs than 6 hrs condition and $NH_4{^+}$-N removal efficiency was also higher at 4 hrs with 89.2% than 65.4% of 6 hrs. However, the ratio of NOB was decreased when HRT was reduced from 6 hrs to 4 hrs and $NO_2{^-}$-N accumulation was observed at 4 hrs condition. Therefore, it is considered that insufficient HRT condition could supply sufficient substrate and enrichment of AOB in all depth of fixed biofilm but cause decrease of NOB and nitrite accumulation.

• Analytical Science and Technology
• /
• v.32 no.5
• /
• pp.210-216
• /
• 2019

Concentrations of Cu, Zn, Fe, Mn, Ni and Cr have been estimated in sediments of the Shitalakhya River at Polash-Ghorashal area, Narsingdi, Bangladesh. 36 samples of sediments from nine sampling point at different locations of Shitalakhya River were collected to determine the concentration of Cu, Zn, Fe, Mn, Ni, Cr and the samples were analyzed by atomic absorption spectrophotometer (AAS). The obtained results were compared with national and international guidelines. The levels of heavy metal concentrations in sediments were found to decrease in the order of Fe > Mn > Zn > Ni > Cu > Cr, respectively. The heavy metal concentration in sediment of Shitalakhya was below the recommended safe limits of heavy metals by WHO, FAO and other international standards. Contamination factor (CF) of Zn and Cu at sampling point Fsd2 show higher (> 1) values due to the influence of external discrete sources like wastage catalysts of ZnO and CuO. Geo-accumulation index values of the study indicate as non-contaminated to moderately contaminate.

• Journal of Korea Multimedia Society
• /
• v.14 no.10
• /
• pp.1229-1237
• /
• 2011

The volume ray-casting method is one of the direct volume rendering methods that produces high-quality images as well as manipulates semi-transparent object. Although the volume ray-casting method produces high-quality image by sampling in the region of interest, its rendering speed is slow since the color acquisition process is complicated for repetitive memory reference and accumulation of sample values. Recently, the GPU-based acceleration techniques are introduced. However, they require pre-processing or additional memory. In this paper, we propose efficient point-primitive based method to overcome complicated computation of GPU ray-casting. It presents semi-transparent objects, however it does not require preprocessing and additional memory. Our method is fast since it generates point-primitives from volume dataset during sampling process and it projects the primitives onto the image plane. Also, our method can easily cope with OTF change because we can add or delete point-primitive in real-time.