• 대한안전경영과학회:학술대회논문집
• /
• 대한안전경영과학회 1999년도 추계학술대회
• /
• pp.53-72
• /
• 1999

IPQC system was introduced for the flight safety at the age of scientific safety management in the 1980s. In spite of performing this system, aircraft accidents caused by human factors, which were above 70% among all flight accident factors, have not been reduced. Accordingly, throughout this paper I analyzed the aircraft accident factors by means of a literature study and a pilot survey. Then, based on the notion of TQC(Total Quality Control), I hierarchically classified Individual Quality into Capacity Management, Safety Management, and General Management and did the low-ranked management factors as well. AHP (Analytic Hierarchy Process), one of the scientific management methods, was used for estimating the relative importance of Individual Quality Control factors and the heavy aircraft accident causes over the last 20 years were analyzed according to the flight ranks. Based on the comparative analysis of results derived above, an IPQC model as flight ranks is established. In short, according to this newly suggested model we can obtain the maximum flight safety with the preventive actions against aircraft accidents caused by human factors and by improving the operation effect under the reasonable pilot management.

• Nuclear Engineering and Technology
• /
• 제47권1호
• /
• pp.74-84
• /
• 2015

If a transient occurs in a nuclear power plant (NPP), operators will try to protect the NPP by estimating the kind of abnormality and mitigating it based on recommended procedures. Similarly, operators take actions based on severe accident management guidelines when there is the possibility of a severe accident occurrence in an NPP. In any such situation, information about the occurrence time of severe accident-related events can be very important to operators to set up severe accident management strategies. Therefore, support systems that can quickly provide this kind of information will be very useful when operators try to manage severe accidents. In this research, the occurrence times of several events that could happen during a severe accident were predicted using support vector machines with short time variations of plant status variables inputs. For the preliminary step, the break location and size of a loss of coolant accident (LOCA) were identified. Training and testing data sets were obtained using the MAAP5 code. The results show that the proposed algorithm can correctly classify the break location of the LOCA and can estimate the break size of the LOCA very accurately. In addition, the occurrence times of severe accident major events were predicted under various severe accident paths, with reasonable error. With these results, it is expected that it will be possible to apply the proposed algorithm to real NPPs because the algorithm uses only the early phase data after the reactor SCRAM, which can be obtained accurately for accident simulations.

• 대한건축학회논문집:구조계
• /
• 제35권8호
• /
• pp.157-168
• /
• 2019

Modular Construction is regarded as having enhanced safety compared to traditional construction since most of modular manufacturing process in plants. Unlike general consideration for safety in modular construction, several industrial accident data and studies have pointed out that the accident rate of modular construction is not enough less as much as the practitioners have expected. It means that there is a clear need for improvement of safety management in modular construction. To enhance safety, it is necessary to identify the type and cause of accident through accident cases in order to prevent safety accident in advance. In this consideration, this study analyzed the types and causes of accidents through root cause analysis procedure with accident cases of U.S. OSHA. The classification was carried out in the order of process type, accident type and cause of accident. By following the classification criteria in this study, the causal factor was derived and the root cause map was created. Based on the analysis results, cross-analysis was conducted and it is shown that activity characteristics of modular construction are related to safety accidents. In addition, prevention methods to reduce safety accident by major activity are presented in terms of organizational, educational and technical aspects. This study contributes that the result can be used as the basic safety management in the manufacturing and construction process of modular construction.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2003년도 추계학술대회 논문집(II)
• /
• pp.229-234
• /
• 2003

In this paper, the elemental components and improving purpose in advanced safety management system are reviewed to cope with a railway fire accident. And a considering procedure(V-cycle) of long-term plan for railway fire safety improvement is proposed. For the purpose of preventing recurrence of accident, items which have to be considered in the course of accident investigation and cause analysis are presented according to the stage of investigation activity.

• International Journal of Safety
• /
• 제4권1호
• /
• pp.23-26
• /
• 2005

In spite of the rapid economic growth in Korea, safety cultures in construction industry have not much improved during last ten years. When it is compared to other developed countries of safety, accident rate of Korean construction sites shows bleak figures. This study compares the safety figures of Korea with the UK figures in order to find out what is needed for the safety of the construction sites in Korea. By comparing occupations, age groups, kind of accident, and agent, this study found several differences and similarities, and derived the directions for better safety management.

• 대한안전경영과학회지
• /
• 제8권2호
• /
• pp.39-49
• /
• 2006

Forklift achieves transportation of freight and continues loading and unloading work repeatedly long for hours in industry spot. Therefore, drivers feel tired make a mistake for wrong operation of vehicle caused by continuous work. These components are resulted in CTDs, some industrial accident. That is the forklift need to ergonomics access. So, in this paper, requirements of forklift user were abstracted using questionnaire, produced important design factor for pedal and lever using QFD(Quality Function Deployment), and then suggested ergonomic considerations for industrial accident prevention.

• 대한안전경영과학회지
• /
• 제2권1호
• /
• pp.117-127
• /
• 2000

It is said that a large part of losses caused by company is attributet to the loss manpower material resources by industrial accident. To alleviate industrial accident, machine-oriented safety supervision is superior to that of manpower-oriented in spite of diversified efforts, in many aspects. It will not secured a sense of safety if people can not utilize machines correctly despite excellent machines. As a part of preventing industrial accident, industrial safety education is aimed to improvement of productivity of company through exact research of actual condition of industrial safety education.

• 대한안전경영과학회:학술대회논문집
• /
• 대한안전경영과학회 2008년도 춘계학술대회
• /
• pp.93-100
• /
• 2008

In this paper, we propose the application of the Human Factors Analysis and Classification System(HFACS) to analyze an aircraft accident data. HFACS is a general human error framework originally developed and tested within the U.S military as a tool for investigating and analyzing the human causes of aviation accidents. It was examined that HFACS reliably accommodate all human causal factors associated with the commercial accidents. We found that the HFACS could be used as a reliable tool for investigating aircraft accidents including a single accident analysis.

• 수산해양교육연구
• /
• 제28권2호
• /
• pp.401-406
• /
• 2016

Elevator is very important transportation facility of modern society. But there have been frequent elevator accidents recently. In the view of safety management of elevator, the corresponding study must be done since accidents related elevator include not only actual accident but also possible accident in order to protect user from danger. A 3D design was developed using SolidWorks and behavior analysis using FEM Code.

• 한국항공운항학회지
• /
• 제26권2호
• /
• pp.132-138
• /
• 2018

Aviation safety requires systematic national attention and management because aircraft accident produce greater undesired social impact, economical damage, and declining national credibility compare to other transportation accident. Specially, Republic of Korea has highly increased risk of air accident as a major air transportation point having small aerospace, connecting pacific ocean and Asia, and explosively increased air traffic produced by economical growth, operating numerous military aircraft for the South and North Koreas' confrontational situation. Also, greatly increased domestic and oversea air travels by Koreans and foreigners as well as air freight based on heightened Korea's national power, launching new low cost carriers, and popularized leasure aviation have produced large amount of aviation needs in various fields. However, national aviation safety management system gratifying increased aviation needs and aircraft operations is seem to be slow in progress. This paper will show optimized measures utilizing private, governmental, and military resources to prevent aircraft accident under circumstances of limited budget and an favorable conditions, then will propose several action items.