• 한국산학기술학회논문지
• /
• 제15권5호
• /
• pp.2769-2777
• /
• 2014

본 연구는 2008년 중반 이후 중소기업의 수출입 업무에 uTradeHub 시스템이 도입된 이래 해당 시스템의 유용성과 사용자 만족도를 점검한다는 차원에서 i) uTradeHub 수용요인에 따른 시스템의 유용성과 사용자 만족도에 영향을 미치는 요인을 파악하고, ii) 시스템의 유용성이 사용자 만족도에 미치는 영향관계를 분석함으로써 향후 uTradeHub 시스템을 도입하고자 하는 무역업체가 시스템 도입과정에서 간과하기 쉬운 uTradeHub의 수용요인을 효율적으로 관리하여 도입한 시스템의 성과를 최대화할 수 있도록 도움을 주고자 하였다. 설문조사를 통해 수집한 112개의 유효응답 자료를 SPSS 19.0 통계패키지를 이용하여 실증분석 하였으며, 분석결과는 다음과 같다. 첫째, 시스템의 유용성에 유의한 영향을 미치는 uTradeHub 수용요인으로는 상대적 이점, 사용의 편리성, 업무적합성, CEO의 지원, IT인프라 성숙도, 교육/훈련 정도 등이었다. 둘째, 사용자 만족도에 영향을 미치는 uTradeHub 수용요인으로는 상대적 이점, 업무적합성, CEO의 지원, IT인프라 성숙도, 교육/훈련 정도 등이었다. 셋째, 시스템의 유용성은 사용자 만족도에 유의한 영향을 미치는 결과를 보였다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2017년도 추계 학술논문 발표대회
• /
• pp.193-194
• /
• 2017

In this research, the density value of the turbid solution is measured by using the principle of inexpensive but easy Hydrometer method for cement delivered to the actual raw concrete plant, By analyzing the correlation of powder aid, we will try to present a scheme that can be utilized as a method of acquisition acquisition inspection. As a result of the analysis, it was found that there was a large difference between the measured powders assisted with cement powder on the report, and the correlation with the actually measured powder aid Hydrometer density value was good. Therefore, using the method of Fig. 3, it was possible to know that the degree of powder quality of cement delivered to the raw concrete factory can be evaluated quickly and utilized at the time of argument inspection.

• 시스템엔지니어링학술지
• /
• 제17권1호
• /
• pp.65-75
• /
• 2021

When the decommissioning of South Korea nuclear power plants is promoted in earnest with the permanent shutdown of Kori Unit 1 in 2017, a large amount of various types of radioactive waste will be generated. For minimal generation and safe management of decommissioning waste, the waste should be made by appropriate classification of the dismantling waste characteristics in accordance with physical, chemical and radiological characteristics to meet the acceptance criteria of disposal facilities. Replacing the preliminary inspection at the site for the compliance of the waste acceptance criteria (WAC) of medium and low-level radioactive waste with the generator's own radioactive waste certification program (WCP), from the perspective of disposal, the optimization of waste management at the national level contributes to the efficient availability of disposal, such as the processing of non-conforming radioactive wastes at the site. To this end, it is important to evaluate radioactivity in each system and area such as nuclear reactors before decommissioning is carried out in earnest, and the prior removal of harmful wastes is important. From waste collection to waste disposal, decommissioning waste should be managed at each stage in consideration of the acceptance criteria of disposal facilities to minimize the generation of non-conforming waste.

• 마이크로전자및패키징학회지
• /
• 제22권1호
• /
• pp.15-19
• /
• 2015

본 연구에서는 OSP (organic solderability preservative) 표면처리된 PCB (printed circuit board) Cu 볼 패드의 변색을 검사하는 측정 시스템을 제안하였다. PCB 표면처리 중에서 OSP는 친환경적, 낮은 생산 비용 등의 장점으로 널리 이용되고 있으나 온도공정에 따른 변색이 발생하는 문제점이 있어서 접합 신뢰성 불량의 한 원인이 되고 있다. 이러한 변색 불량을 장치 비의존적 CIELAB 색좌표를 도입하여 분석하였다. 먼저, PCB 샘플을 검사하기 위해 적합한 측정 시스템을 표준 조명과 CCD 카메라를 이용하여 제작하고, 랩뷰 (labview) 프로그램을 이용하여 Cu 볼 패드의 변색을 검사하기 위한 이미지를 얻는 알고리즘을 제작하였다. 전체 PCB 이미지에서 이진화 (binarization) 및 외곽영역 추적 (edge detection) 영상처리 과정을 통하여 Cu 볼 패드만의 이미지를 획득하고, 장치 의존적인 RGB 색좌표에서 $3{\times}3$ 변환 행렬을 이용하여 CIELAB 색좌표로 변환하는 과정을 거친다. 본 측정 시스템을 이용하여 변색이 발생한 PCB 샘플을 분석한 결과 Cu 볼 패드 만의 이미지를 대상으로 분석하면 연산에 소요되는 시간이 감소하고 측정 시스템의 오인식률을 감소 시킬 수 있음을 실험적으로 증명하였다. 또한 CIELAB 색좌표 중 $L^*$ (밝음-어두움의 정도), $b^*$ (노랑-파랑의 정도)의 두 가지 기준의 조합이 Cu 볼 패드의 변색 검사에 적합한 색좌표로 분석되었다.

• 한국소음진동공학회논문집
• /
• 제21권12호
• /
• pp.1098-1103
• /
• 2011

The structural integrity of APR1400 reactor vessel internals has been being assessed referring the US Nuclear Regulatory Commission regulatory guide 1.20, comprehensive vibration assessment program. The program is composed of a vibration and stress analysis, a vibration and stress measurement, and an inspection. This paper covers the vibration and stress analysis on the reactor vessel internals by the pulsation of reactor coolant pump. 3-dimensional models to calculate the hydraulic loads and structural responses were built and the pressure distributions and the structural responses were predicted using ANSYS. This paper presents that APR1400 reactor vessel internals have enough structural integrity against the pulsation of reactor coolant pump as the peak stress of the reactor vessel internals is much lower than the acceptance limit.

• 품질경영학회지
• /
• 제32권2호
• /
• pp.168-190
• /
• 2004

In these days of world-wide business environment, the characteristics of quality management are variety, specialty, decentralization, totality, etc. Thus nowadays quality management is demanded to incorporate these new concepts. We propose a web-bused distributed expert system for this purpose. The system consists of four expert systems for design of experiment, acceptance inspection, statistical process control and reliability management corresponding to design quality, incoming-material quality, manufacturing quality and usability quality, respectively, throughout the total product life cycle. Each distributed expert system at the horizontal level in the hierarchy carries out its own quality jobs independently. At the lower level in the hierarchy there is an expert system for measurement analysis to provide reliable data, and at the upper level, an expert system for total quality management to coordinate, integrate and make final decisions. A prototype has been developed and its application is presented.

• 한국품질경영학회:학술대회논문집
• /
• 한국품질경영학회 2009년도 추계학술대회
• /
• pp.3-10
• /
• 2009

When the measurement method for a performance variable is destructive or expensive, it is profitable to replace the performance variable with a highly correlated surrogate variable. In this paper we propose screening procedures using a surrogate variable with specified producer's and consumer's risks. Blending the basic concepts of acceptance sampling plans and screening procedures, the proposed model can be used effectively by quality professionals. Two models are considered: the normal model with dichotomous performance and continuous surrogate variables, and the bivariate normal model with continuous performance and surrogate variables. It is assumed the surrogate variable given the performance variable is normally distributed in the normal model, and performance and surrogate variables are jointly normally distributed in the bivariate normal model. For the two models, Producer's and consumer's risks are derived, and methods of finding the optimal screening procedures are presented. Numerical examples are also given.

• Journal of the Korean Statistical Society
• /
• 제7권1호
• /
• pp.27-43
• /
• 1978

This paper deals with the problem of obtaining a minimum cost acceptance sampling plan for destructive testing. The cost model is constructed under the assumption that the sampling procedure takes the following form; 1) lots rejected on the first sample are acreened with a non-destructive testing, 2) the screening is assumed to be imperfect, and therefore, after the screening, a second sample is taken to determine whether to accept the lot of to scrap it. The usual sampling procedures for destructive testing can be regarded as special cases of the above one. Utilizing Hald's Bayesian approach, procedures for finding the global optimal sampling plans are given. However, when the lot size is large, the global plan is very different to obtain even with the aid of an electronic computer. Therefore a method of finding suboptimal plan is suggested. An example with uniform prior is also given.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2011년도 추계학술대회 논문집
• /
• pp.221-226
• /
• 2011

The structural integrity of APR1400 reactor vessel internals has been being assessed referring the US Nuclear Regulatory Commission regulatory guide 1.20 comprehensive vibration assessment program. The program is composed of a vibration and stress analysis, a limited vibration measurement, and an inspection. This paper covers the vibration and stress analysis on the reactor vessel internals due to the pulsation of reactor coolant pump. 3-dimensional models to calculate the hydraulic loads and structural responses were built and the pressure distributions and the structural responses were predicted using ANSYS. The peak stress of the reactor vessel internals is much lower than the acceptance limit.

• 산업경영시스템학회지
• /
• 제18권36호
• /
• pp.275-285
• /
• 1995

In recent years there has been increasing interest in the issue of process centering in manufacturing process, The traditional process capability indices Cp, Cpk and Cpu are used to provide measure of process performance, but these indices do not represent the issue of process centering. A new measure of the process capability index Cpm is proposed that takes into account the proximity to the target value as well as the process variation when assessing process performance. However, Cpm only considers acceptance cost for deviation from target value within specification limits, do not includes economic consideration for rejected items. This paper proposes flexible process performance measures that considered quadratic loss function caused by quality deviation within specification limits, rejection cost associated with the disposition of rejected items, and inspection cost. In this model disposition of rejected items are considered under perfect corrective procedures and the absence of perfect corrective procedures.