• 한국안전학회지
• /
• 제16권2호
• /
• pp.75-79
• /
• 2001

For handling and storage of reactive chemicals, the hazard evaluations have been extremely important. In the chemical industry, the most concerns are focused on the thermal harzards such as runaway reactions and thermal decompositions, which are mostly governed by thermodynamics and reaction kinetics or these reactive chemical in the system. This study no investigated the thermal decomposition characteristics of nitrophenylhydrazine isomers by using differential scanning calorimeter(DSC) and accelerating rate calorimeter(ARC). Experimental results showed that exothermic onset-temperatures in nitrophenylhydrazine(NPH) isomers were about 160-$210^{\circ}C$ by DSC and 100-$150^{\circ}C$ by ARC. The decomposition temperature acquired by ARC was about 50-$60^{\circ}C$ lower than that by DSC. Reaction heats were about 40-100cal/g by DSC and 330-750ca1/g by ARC. While ortho isomer of NPH show two distinct exothermic peaks, para isomer shows a single peak in DSC curves. The first exothermic peak for 2-NPH is mainly due to intramolecular dehydration forming 1-hydroxybenzotriazole(HOBT) and the second exothermic peak is mainly due to the decomposition of HOBT formed in the first step of decomposition. The exothermin peak in the DSC curve for 4-NPH is mainly due to dissociation of hydrazino and nitro groups.

• 한국안전학회지
• /
• 제13권4호
• /
• pp.180-185
• /
• 1998

The evaluation of thermal and pressure hazard of chemicals on the manufacturing, transporting and storaging is important in the chemical industry for safety. In this study, the thermal decomposition characteristics of intermediate of Saccharin were investigated by using Accelerating Rate Calorimeter(ARC) and Differential Scanning Calorimeter(DSC). Experimental results showed that decomposition temperatures in p-TSA were about 280~$318^{\circ}C$ by DSC and $201^{\circ}C$ by ARC. In case of o-TSA were about $336^{\circ}C$~$360.8^{\circ}C$ by DSC and $299^{\circ}C$ by ARC. The decomposition temperature acquired by ARC was about $70^{\circ}C$ lower than that by DSC. The exothermic runaway reaction in case of p-TSA occured in 598 minute and o-TSA in 5 minute. For the safety in the chemical industry, we should consider the ARC data as well as DSC data in the handling and design of process.

• 한국안전학회지
• /
• 제27권5호
• /
• pp.77-87
• /
• 2012

Compared to a batch reactor, where all reactants are initially charged to the reactor, the semi-batch reactor presents serious advantages. The feed of at least one of the reactants provides an additional way of controlling the reaction course, which represents a safety factor and increases the constancy of the product quality. The aim of this study was to investigate the characteristics of thermal hazard such as a feed time, catalysis concentration and solvent concentration in methylthioisocyanate(MTI) synthesis reaction process. The experiments were carried out by the Multimax reactor system and Accelerating rate calorimeter(ARC). The MTI synthesis reaction process has many reaction factors and complicated reaction mechanism of multiphase reaction. Through this study, we can use as a tool for assessment of thermal hazard of other reaction processes by applying experiment method provided.

• 전기화학회지
• /
• 제12권3호
• /
• pp.239-244
• /
• 2009

리튬 이차 전지의 전기화학적 특성 및 안전성 향상을 위한 음극 활물질 표면 처리 재료로 $Al_2O_3$와 $nano-Li_4Ti_5O_{12}$등이 사용된다. 표면 처리된 음극 활물질의 형상과 특성을 관찰하기 위해 주사전자현미경(Scanning electron microscopy, SEM), 투과전자현미경(Transmission electron microscopy, TEM)으로 관찰하였으며, 전기화학적 특성 및 안전성 평가를 위해 충방전기 및 가속 율열량계(Accelerating Rate Calorimeter, ARC)를 사용하였다. 각각의 금속 산화물에 따른 초기 효율 및 초기 용량은 82.5%와 350mAh/g로 동일하지만, 충방전 율속에 따른 특성 및 수명, 그리고 열적 안전성은 $nano-Li_4Ti_5O_{12}$로 음극 활물질을 표면 처리 한 활물질이 더 우수하였다.

• 한국가스학회지
• /
• 제17권4호
• /
• pp.1-8
• /
• 2013

본 연구에서는 벌크 중합법을 이용한 폴리스티렌 중합공정의 폭주반응에 대한 열적 위험성을 가속속도열량계(ARC)와 소규모 반응열량계(MM)를 이용하여 평가하였다. 당해 중합공정은 반응온도 $120^{\circ}C{\sim}130^{\circ}C$로 운전되어져야 하며, $130^{\circ}C$ 이상의 반응온도에서는 반응 생성물의 급격한 점도 증가로 인하여 반응기의 온도제어 실패에 따른 폭주반응의 위험성이 존재하였다. 또한 당해 중합공정의 반응온도($120^{\circ}C{\sim}130^{\circ}C$)에서 공정운전 초기에 반응기의 냉각실패가 발생할 경우 폭주반응으로 인해 반응기의 온도와 압력이 각각 30 ~ 50분 이내에 약 $340^{\circ}C$, 5.3 bar 까지 급격히 상승하여 반응기의 파열판이 파열되거나 반응기가 폭발할 수 있는 열적 위험성이 높게 나타났다.