• 제목/요약/키워드: absorption spectra

검색결과 1,168건 처리시간 0.027초

Highly Luminescent Aniline and TiO2 Composite: The Effect of Weight Ratio of Aniline and TiO2

  • Kim, Byoung-Ju;Park, Eun-Hye;Kang, Kwang-Sun
    • Current Photovoltaic Research
    • /
    • 제4권1호
    • /
    • pp.8-11
    • /
    • 2016
  • Strong deep ultraviolet emitting aniline and $TiO_2$ composite has been synthesized via hydrolysis and condensation reactions of titaniumisopropoxide ($Ti(OPr)_4$), aniline, and acetic anhydride. Three different weight ratios of aniline and $Ti(OPr)_4$ including 3:1 ($TiO_2An-A$), 2:1 ($TiO_2An-B$), and 1:1 ($TiO_2An-C$) were synthesized and characterized their optical properties. The FTIR spectra of the $TiO_2An-A$, -B, and -C showed the absorption intensities of the benzene ring stretching and bending vibrations, and benzene ring -CH stretching, bending, and deformation vibrations increased with the increase of the amount of aniline. The UV-visible absorption spectra showed that the UV region absorption was slightly increased with the increase of the amount of aniline. The photoluminescence (PL) intensities were exponentially increased with the increase the excitation wavelength from 307 to 317 nm, steadily increased from 300 to 313 nm and slowly increased from 302 to 308 nm for $TiO_2An-A$, -B, and -C, respectively and decreased thereafter. Therefore, the PL intensity is strongly dependent on the weight ratio of $Ti(OPr)_4$ and aniline.

Sol-Gel법을 이용한 (0.8PPV+0.2DMPPV)/Silica Glass, Borosilicate Glass 복합체의 합성과 그 특성 (Synthesis and Their Properties of (0.8PPV+0.2DMPPV)/Silica Glass, Borosilicate Glass Composites by Sol-Gel Process)

  • 이병우;김병호;윤영권;한원택
    • 한국세라믹학회지
    • /
    • 제34권9호
    • /
    • pp.993-1001
    • /
    • 1997
  • The (0.8PPV+0.2DMPPV) copolymer and silica/borosilicate composites were synthesized by sol-gel process. The organic-inorganic hybrid solution was prepared by using of (0.8PPV+0.2DMPPV) copolymer precursor solution as a raw material for organic components and TEOS and TMB for glass components. Then by drying the solution in vacuum at 5$0^{\circ}C$ for 7days and subsequent heat treatment in vacuum at 15$0^{\circ}C$~30$0^{\circ}C$ for 2h~72h with heating rate of 0.2$^{\circ}C$/min and 1.8$^{\circ}C$/min, the organic-inorganic composites were synthesized. Microstructural evolution of the composites was characterized by DSC, IR spectrocopy, UV/VIS spectroscopy, and TEM. Elimination of the polymer precursor and degradation of the polymer were observed by DSC and Si-O and trans C=C absorption peaks were identified by IR spectra. The polymer was found to be successfully incorporated into the glass matrix and it was confirmed by the absorption peaks from the polymer in the UV/VIS spectra and the TEM results. The absorption peak of the composites was found to shift toward short wavelength side compared to that of the pure polymer and the amount of the blue shift increased with increasing the heat treatment temperature and heat treatment time and with decreasing the heating rate.

  • PDF

전기분해와 UV 조사에 의한 수중 Rhodamine B의 제거(II) (Removal of Rhodamine B in Water by Ultraviolet Radiation Combined with Electrolysis(II))

  • 김동석;박영식
    • 한국환경과학회지
    • /
    • 제18권6호
    • /
    • pp.667-674
    • /
    • 2009
  • This study has carried out to evaluate the effect of NaCI as electrolyte of single (electrolysis and UV process) and complex (electrolysis/UV) processes for the purpose of removal and mineralization of Rhodamine B (RhB) dye in water. It also evaluated the synergetic effect on the combination of electrolysis and UV process. The experimental results showed that RhB removal of UV process was decreased with increase of NaCl, while RhB removal of electrolysis and electrolysis/UV process was increased with increase of NaCI. The decolorization rate of the RhB solution in every process was more rapid than the mineralization rate identified by COD removal. The latter took longer time for further oxidation. Absorption spectra of an aqueous solution containing RhB showed a continued diminution of the RhB concentration in the bulk solution: concomitantly, no new absorption peaks appeared. This confirmed the decolorization of RhB, i.e., the breakup of the chromophores. It was observed that RhB removal in electrolysis/UV process is similar to the sum of the UV and electrolysis. However, it was found that the COD of RhB could be degraded more efficiently by the electrolysis/UV process than the sum of the two individual process. A synergetic effect was demonstrated in electrolysis/UV process.

칼리머 증기발생기에서 물-소듐 반응에 의한 소음 발생과 수소 기포의 소음 흡수 (Noise Generation by Water-Sodium Reaction and its Absorption on Hydrogen Bubbles for KALIMER Steam Generator)

  • 김태준;;황성태
    • 한국소음진동공학회:학술대회논문집
    • /
    • 한국소음진동공학회 2000년도 춘계학술대회논문집
    • /
    • pp.1829-1835
    • /
    • 2000
  • The experimental results of sodium-water reaction noise measurement in frequency range $1{/sim}200kHz$ are presented. The experiments of noise generation under the condition of sodium test facility, water leak rate $0.01{\sim}1.2g/s$ and temperature of sodium $250{\sim}500^{\circ}C$, were carried out. From theoretical study it is noted that the noise resonant attenuation on hydrogen bubbles in liquid sodium plays the significant role for leak noise spectra formation. Interaction of leak noise and hydrogen bubbles in sodium being accompanied by thermal, emission and viscosity energy dissipation was studied. Acoustic noise spectra were investigated from point of view of water leak detection in sodium/water steam generator. The results of sodium-water reaction noise absorption on hydrogen bubbles in liquid sodium by temperature $250{\sim}500^{\circ}C$ are presented. The theoretical model of noise absorption using the coefficients of attenuation was developed. From calculation the coefficients of attenuation were estimated.

  • PDF

매트릭스에 의해 희석된 ACETONITRILE과 DMF 분자클라스터의 80K에서 적외선 흡수 스펙트럼의 분석 (The Infrared Absorption Spectra of Molecular Clusters of Acetonitrile and DMF Diluted by Matrices at 80K)

  • 김완희;정종학;정기호
    • 분석과학
    • /
    • 제5권3호
    • /
    • pp.285-294
    • /
    • 1992
  • 80K에서 사염화탄소 또는 크세논 매트릭스에 의해 희석된 상태에서 $CH_3CN$과 DMF 분자의 이합체의 구조를 적외선 흡수 분광법으로 연구하였다. 시료와 매트릭스 물질을 저온의 KBr트랩창에 함께 퇴적시키고, 순수한 시료와 매트릭스에 희석된 시료의 적외선 스펙트럼을 비교하여 이합체의 구조를 설명하였다. $CH_3CN$의 이합체는 반평행 모양을 그리고 DMF 이합체는 마주보는 선형을 나타내었다. 매트릭스에 희석된 시료에 온도를 상승시키면 순수한 시료와 같은 모양의 적외선 스펙트럼을 보여 주었다.

  • PDF

Spectroscopic Properties and Ligand Field Analysis of trans -Dibromo(2,2-dimethyl-1,3-diaminopropane)chromium(III) Moiety

  • Choi, Jong-Ha;Oh, In-Gyung;Lim, Woo-Taik;Ryoo, Keon-Sang;Kim, Dong-Il;Park, Yu-Chul
    • Bulletin of the Korean Chemical Society
    • /
    • 제26권6호
    • /
    • pp.903-908
    • /
    • 2005
  • The sharp-line absorption and emission spectra of $(H_{13}O_6)${$trans-[Cr(Me_2tn)_2Br_2]$}$_2Br_2(ClO_4)\;(Me_2$tn = 2,2-dimethyl-1,3-diaminopropane) have been measured between 13000 $cm^{-1}$ and 16000 $cm^{-1}$ at 5 K. The 298 K infrared and visible absorption spectra have also been measured. The nine electronic bands due to spin-allowed and spin-forbidden transitions were assigned. Using observed transitions, a ligand field analysis has been performed to probe the ligand field properties of coordinated atoms in the title chromium(III) complex ion. The zero-phonon line in the sharp-line absorption spectrum splits into two components by 286 $cm^{-1}$, and the large $^2E_g$ splitting can be reproduced by the modern ligand field theory. It is confirmed that nitrogen atoms of the Me2tn ligand have a strong $\sigma$-donor character, but the bromide has weak $\sigma$- and $\pi$-donor properties toward chromium(III) ion.

X-ray Absorption Near-edge Studies of Au1-xPtx alloys

  • Y.D. Chung;Lim, K.Y.;Lee, Y.S.;C.N.Whang;Park, B.S.;Y.Jeon
    • 한국진공학회:학술대회논문집
    • /
    • 한국진공학회 2000년도 제18회 학술발표회 논문개요집
    • /
    • pp.164-164
    • /
    • 2000
  • Since Au-Pt alloys have various atomic structures depending upon composition and annealing temperature, it is very interesting to investigate the electronic structures of alloys. We studied the changes of the electronic structure I the Au-Pt alloys by x-ray absorption near edge spectroscopy (XANES). Two kinds of Au-Pt alloy samples were prepared by arc melting methods and ion-beam-mixing technique. The Pt L2, 3-edge and Au L2, 3-edge X-ray absorption spectra (XPS) were measured with the electron yield mode detector at the 3C1 beam line of the Pohang Light Source (PLS). It was found that there was a substantial decrease in the area of the Pt L2, 3 white lines compared with that of pure Pt. The observed decrease in white line area was attributed to an increase in the number of pure Pt. The observed decrease in white line area was attributed to an increase in the number of 5d-electrons at the Pt site upon alloy formation. However, the Au L2, 3 edge spectra for Au-Pt alloys are all similar to that of pure Au. This implies that the 5d hole count of Au is not changed by alloy formation with Pt.

  • PDF