• 제목/요약/키워드: absorption mechanism

Search Result 550, Processing Time 0.028 seconds

Acustic Study on the Kinetics for the Dissociation-Recombination Reaction between Micelle and Counter-ion in Dodecyl Pyridinium Bromide Solution (Dodecyl Pyridinium Bromide 水溶液中의 Micelle과 Counter-Ion 間의 解離-再結合反應에 對한 超音波에 依한 反應速度論的 硏究)

  • Lee Kun Moo
    • Journal of the Korean Chemical Society
    • /
    • v.17 no.2
    • /
    • pp.73-79
    • /
    • 1973
  • The ultrasonic absorption of Dodecyl pyridinium bromide (D.P.B.) in aqueous solution has been measured at $20^{\circ}C$ over a range of frequencies between 0.1 mc and 90 mc and a range of concentrations from 5 to 100 mM. The excess absorption was observed only in the solutions the concentration of which was higher than the critical micellar concentration (c.m.c.) both in the presence and absence of salt. The excess absorption of sound and the relaxation frequencies obtained from the absorption curves show a discontinuity with the variation of the concentration of D.P.B. in the neighborhood of 60 mM. Other properties such as viscosity, conductivity and velocity of sound also exhibit such a change near the same concentration. It is concluded that a change in the properties of the micelles of D.P.B. occurs in the neighborhood of this concentration. The mechanism of the observed ultrasonic excess absorption in attributed to the reaction $M_2{\rightleftarrow}M_1+2Br^-$where$M_2$ and$M_1$are two types of micelles. The rate constants of forward and backward reactions are found to be $6.9 {\times} 10^5 sec^{-1)$and $6.7{\times}10^{10}sec^{-1}mole{-2}$ respectively. Some kinetic characteristics including free energy, enthalpy, entropy and activation energy were calculated.

  • PDF

Numerical analysis of the coupled heat and mass transfer phenomena in a metal hydride hydrogen storage reactor(I) - Model development of analyzation for hydrogen absorption reaction using the $LaNi_5$ bed (금속수소화물 수소저장 용기 내부의 열 및 물질전달 현상에 대한 수치적 연구(I) - $LaNi_5$ 베드를 이용한 수소 흡장반응 해석 모델 개발)

  • Nam, Jinmoo;Ju, Hyunchul
    • 한국신재생에너지학회:학술대회논문집
    • /
    • 2010.06a
    • /
    • pp.225.1-225.1
    • /
    • 2010
  • Within recent years attention has been focused on the method of hydrogen storage using metal hydride reactor due to its high energy density, durability, safety and low operating pressure. In this paper, a numerical study is carried out to investigate the coupled heat and mass transfer process for absorption in a cylindrical metal hydride hydrogen storage reactor using a newly developed model. The simulation results demonstrate the evolution of temperature, equilibrium pressure, H/M atomic ratio and velocity distribution as time goes by. Initially, hydrogen is absorbed earlier from near the wall which sets the cooling boundary condition owing to that absorption process is exothermic reaction. Temperature increases rapidly in entire region at the beginning stage due to the initial low temperature and enough metal surface for hydrogen absorption. As time goes by, temperature decreases slowly from the wall region due to the better heat removal. Equilibrium pressure distribution appears similarly with temperature distribution for reasons of the function of temperature. This work provides a detailed insight into the mechanism and corresponding physicochemical phenomena in the reactor during the hydrogen absorption process.

  • PDF

Photoluminescence Excitation Spectroscopy Studies of Anodically Etched and Oxidized Porous Zn

  • Chang, Sung-Sik;Lee, Hyung-Jik
    • Journal of the Korean Ceramic Society
    • /
    • v.41 no.5
    • /
    • pp.359-363
    • /
    • 2004
  • Photoluminescence excitation (PLE) spectroscopy studies were performed for anodically etched porous Zn, which exhibited a PL in the blue/violet spectral range peaking at 420 nm (2.95 eV), and oxidzed porous Zn at 380$^{\circ}C$ for 10 min and 12 h. A broad absorption band was observed at 4.07 eV (305 nm), 3.49 (355 nm) for anodically etched porous Zn. In contrast, both the oxidized porous Zn and sintered ZnO exhibited an almost identical one broad absorption band at 3.85 eV (322 nm), when PLE spectra were measured at 378 nm (3.28 eV). The oxidized porous Zn and sintered ZnO, which displayed both UV and green luminescence band, showed an additional absorption band at 389 nm (3.19 eV) and 467 nm (2.66 eV). In contrast, no significant absorption band was detected for a 10-min oxidized porous Zn, which only displayed one UV luminescence void of deep-level luminescence. These absorption bands determined by PLE studies enabled a clear understanding of an emission mechanism for the UV and green luminescence from ZnO.

Load transfer and energy absorption in transversely compressed multi-walled carbon nanotubes

  • Chen, Xiaoming;Ke, Changhong
    • Coupled systems mechanics
    • /
    • v.6 no.3
    • /
    • pp.273-286
    • /
    • 2017
  • We present a simple and easy-to-implement lumped stiffness model to elucidate the load transfer mechanism among all individual tube shells and intertube van der Waals (vdW) interactions in transversely compressed multi-walled carbon nanotubes (CNTs). Our model essentially enables theoretical predictions to be made of the relevant transverse mechanical behaviors of multi-walled tubes based on the transverse stiffness properties of single-walled tubes. We demonstrate the validity and accuracy of our model and theoretical predictions through a quantitative study of the transverse deformability of double- and triple-walled CNTs by utilizing our recently reported nanomechanical measurement data. Using the lumped stiffness model, we further evaluate the contribution of each individual tube shell and intertube vdW interaction to the strain energy absorption in the whole tube. Our results show that the innermost tube shell absorbs more strain energy than any other individual tube shells and intertube vdW interactions. Nanotubes of smaller number of walls and outer diameters are found to possess higher strain energy absorption capacities on both a per-volume and a per-weight basis. The proposed model and findings on the load transfer and the energy absorption in multi-walled CNTs directly contribute to a better understanding of their structural and mechanical properties and applications, and are also useful to study the transverse mechanical properties of other one-dimensional tubular nanostructures (e.g., boron nitride nanotubes).

Characterization of Absorption Process of Taurine Across Rat Small Intestine

  • Kim, Kyung-Soon
    • Archives of Pharmacal Research
    • /
    • v.6 no.2
    • /
    • pp.109-114
    • /
    • 1983
  • A mechanism of taurine transfer across the rat small intestine was elucidated by using the in situ recirculation perfusion or loop method. Taurine uptake was saturable, Km= 39.9 mM, and energy dependent, and required sodium. The close structural analogues, aminomethane sulfonic acid, .gamma.-amino-butyric acid, hypotaurine, and .betha.-alanine, reduced significantly taurine uptake when present in 10-fold excess. The .alpha.-amino acid, glycine, did not inhibit uptake. Hence, all of these findings lead to a conclusion that a carrier-mediated transport system for taurine exists in the small intestine.

  • PDF

Investigation of Amplifying Mechanism in an t-Band Erbium-Doped Fiber Amplifier Pumped by a 980 nm Pump

  • Lee, Dong-Han;Lee, Han-Hyub;Oh, Jung-Mi;Kim, Byung-Jun
    • Journal of the Optical Society of Korea
    • /
    • v.7 no.2
    • /
    • pp.67-71
    • /
    • 2003
  • For a more detailed understanding of the mechanism of an L-band erbium-doped fiber amplifier, we investigated 980 nm absorption, signal amplification and forward and backward amplified spontaneous emission along the erbium-doped fiber. In addition, we compared performances of the erbium-doped fiber amplifier with and without a fiber Bragg grating.

Total Dietary Fiber and Mineral Absorption

  • Gordon, Dennis-T.
    • Journal of Nutrition and Health
    • /
    • v.25 no.6
    • /
    • pp.429-449
    • /
    • 1992
  • The consumption of foods rich in TDF should not be associated with impaired mineral absorp-tion and long-term mineral status. In surveys of populations consuming high amounts of TDF e.g Third World populations and vegetarinas gross deficiencies in mineral nutrition have not been noted. If mineral status is low among these groups it is most likely caused by the inadequacy or imbalance of the diet and not by the TDF. The key word is interaction which should be inte-rpreted in dietary imbalances that produce nut-rient deficiencies. There are no strong data to support the concept that TDF inhibits mineral absorption through a binding chelation mechanism. Limited data sug-gest that positively charged groups on polymers such as chitosan and cholestyramine will decrease iron absorption in humans and animals. Because TDF does not contain positively charged groups future research should be directed at the possible role of protein consumed along with TDF and the combination of effects on mineral nutrition Phytic acid is acknowledged as a potent chela-tor of zinc. However its association with zinc and its propensity to lower Zn bioavaiability may enhance the absorption of other elements notably copper and iron. The importance of interactions among nutrients including TDF will gain addi-tional attention in the scientific community. Soluble and insoluble dietary fiber function di-fferently in the intestine. Insoluble fibers accele-rate movement through the intestine. Soluble die-tary fibers appear to regulated blood concentra-tions of glucose and cholesterol albeit by some unknown mechanism. In creased viscosity produ-ced by the SDF in the intestine may provide an explanation of how this class of polymers affects plasma glucose cholesterol and other nutrients. Employing a double-perfusion technique in the rat we demonstrated that viscosity produced by SDF will delay transfer of zinc into the circulatory system. This delayed absorption should not be interpreted as decreased utilization. A great deal of additional research is required to prove the importance of luminaly viscosity produced by SDF on slowing nutrient absorption or regulating bllod nutrient homeostasis. Increased intake of TDF in the total human diet appears desirable. A dietary intake of 35g/day should not be considered to have a negative effect on mineral absorption. It is important to educate people that an intake of more than 35g TDF/day may cause an imbalance in the diet that can adve-rsely affect mineral utilization. Acknowledgments. Appreciation is given to Dr. George V. Vahouny(deceased) who was intense a great competitor in and out of science and who gave the author inspiration Portions of this work were supported by the University of Missouri Ag-ricultural Station and by a grant from the Univer-rch Support Grant RR 07053 from the National Institutes of Health. Contribution of the Missouri Agriculatural Experiments Station Journal Series No. 10747.

  • PDF

Ozone Inactivation of Bacteriophage f2 (오존에 의한 bacteriophage f2의 살균작용(殺菌作用))

  • Kim, Chi-Kyung
    • Applied Microscopy
    • /
    • v.11 no.1
    • /
    • pp.29-38
    • /
    • 1981
  • Bacteriophage f2 were treated with ozone at various concentrations for 20 minutes. The inactivation kinetics of f2 phage were examined during ozonation. In order to study the mode of action of ozone on the phage f2, absorption of the phage to the host pili was meassured by utilyzing radioactivity of tritium incorporated into the phage RNA. Sucrose density gradient analysis and electron microscopy were also used to prove the mechanism of ozone inactivation of the phage. Strucural proteins of the phage were broken by ozonation into many protein subunits. The extent of phage breakage was proportional to ozone concentration and reaction time. Percent decrease of the phage absorption to the host pili was coincident with the rate of ozone inactivation of the phage. Ozone inactivation of bacteriophage f2 was shown to be caused by the breakage of the structural protein and blockage of the phage absorption to the host pili.

  • PDF

A study of ballistic impact energy absorbing mechanism of composites (복합재료의 방탄충격에너지 흡수에 관한 연구)

  • 강은영;윤영기;황도인;윤희석
    • Proceedings of the Korean Society of Precision Engineering Conference
    • /
    • 1997.10a
    • /
    • pp.773-776
    • /
    • 1997
  • This paper presents an investigation of the energy absorption of composite laminates during ballistic impact. Three components are responsible for the absorption of energy-the tensile failure of fiber, the elastic deformation of the composite, the delamination of composite laminates. The ballistic limit, V/sub 0/, of the laminates is determined using a previous model implemented to determine the energy absorption of the three components listed above. The size of the deformed zone during impact was estimated by an approximate solution for impacts on plates. The carbon/epoxy plates were examined for this research.

  • PDF

The Study on the Axial Collapse Characteristics of Composite Thin-Walled Members for Vehicles (차체구조용 복합재 박육부재의 축압괴 특성에 관한 연구)

  • 김영남;차천석;양인영
    • Transactions of the Korean Society of Automotive Engineers
    • /
    • v.9 no.6
    • /
    • pp.195-200
    • /
    • 2001
  • Composites have wide applications in aerospace vehicles and automobiles because of the inherent flexibility in their design for improved material properties. Composite tribes in particular, are potential candidates for their use as energy absorbing elements in crashworthiness applications due to their high specific energy absorbing capacity and the stroke efficiency. Their failure mechanism however is highly complicated and rather difficult to analyze. This includes fracture in fibres, in the matrix and in the fibre-matrix interface in tension, compression and shear. The purpose of this study is to investigate the energy absorption characteristics of CFRP(Carbon Fiber Reinforced Plastics) tubes on static and impact tests. Static compression tests have been carried out using the static testing machine and impact tests have been carried out using the vertical crushing testing machine. Interlaminar number affect the energy absorption capability of CFRP tubes. Also, theoretical and experimental have the same value.

  • PDF