• 한국식품영양학회지
• /
• 제14권4호
• /
• pp.346-354
• /
• 2001

Physicochemical properties of dough and bread supplemented with onion (Allium cepa L.) powder were investigated. Farinographic characteristics of dough showed that addition of onion by 2% and 4% increased water absorption, however, as the onion added more the water absorption decreased. Addition of 2% onion delayed time for development of dough a little, while more than 4% onion shortened the development time significant1y. A reduction in stability and an Increase in weakness of dough were observed by addition of onion. Addition of onion powder resulted in a reduction of extendibility and an increase in resistance to extension of dough as measured by extensograph. Amylographic analysis showed that addition of onion increased gelatinization temperature and decreased maximum viscosity. Moisture content, baking loss, height and volume of bread tended to decrease with the addition of onion powder. Lightness of bread crust and crumb decreased as the onion powder added more, while redness and yellowness increased. Bread tilth onion powder had mode free amino acid. especially, Arginine. aspartic acid, glutamic acid and alanine, than control. The addition of onion hardness of bread increased, but springiness decreased as the onion added more. Sensory evaluation of bread indicated that addition of 2% and 4% onion powder enhanced springiness, mouth feeling, appearance, hardness, moistness and overall acceptability.

• 한국의류학회지
• /
• 제35권8호
• /
• pp.1006-1013
• /
• 2011

An enzymatic treatment method using alcalase was introduced to improve the moisture characteristic of the polyamide fiber. The alcalase treatment conditions such as the pH, treatment temperature, enzyme concentration, and treatment time were optimized by measuring the amino groups. The changes in the weight loss, tensile strength, moisture regain, water contact angle (WCA), and water absorption rate of the polyamide fiber with the changes in the alcalase treatment conditions were evaluated. The optimum alcalase treatment conditions for polyamide fiber were found to be a treatment temperature of 50oC, a treatment time of 50 minutes, an alcalase concentration of 10% (owf), and a pH of 7.0. The ethylenediaminetetraacetic acid (EDTA) and L-cysteine accelerated the activity of the enzyme; however, they did not have an effect on the amino group production of the fiber surface. The alcalase treatment of the polyamide fiber improved the fiber's moisture regain, WCA, and absorption rate due to the amino group on the fiber surface. The results showed that the alcalase treatment of polyamide fiber is an effective method to improve the moisture characteristic of the polyamide fiber.

• 한국농공학회지
• /
• 제20권1호
• /
• pp.4575-4591
• /
• 1978

In order to investigate the effects of grain size distribution, cement content, and molding pressure on the strength and durability of soil-cement mixtures, a laboratory test of soil cement mixtures was performed at four levels of cement content, five levels of molding pressure, and four levels of normal curing periods. The results are summarized as follows: 1. Optimum moisture contents in loam soil and maximum dry density in sand soil increased with the increase of cement content, but in others, both optimum moisture contents and maximum dry density were changed ununiformly. 2. When the specimens were molded with molding pressure, 50kg/$\textrm{cm}^2$, strength of soil cement mixture with cement content, 2 and 4 per cent, was lower than the strength of soil cement mixture without cement content by more than 40 to 50 per cent. 3. The strength of soil-cement molded with molding pressure, 100kg/$\textrm{cm}^2$, was higher than the strength of soil-cement molded with M.D.D. obtained from standard compaction test more than 40 per cent in sand loam cement and 50 per cent in loamy cement. 4. There was highly significant positive correlation among molding pressure, cement content and unconfined compressive strentgh and so the following multiple regression equations were obtained. Loam: fc=1.9693C+0.197P-0.84 Sandy loam: fc=2.9065C+0.235P-0.77 5. When the specimens were molded with molding pressure, 20 to 100kg/$\textrm{cm}^2$, the regression equation between the 28-day and 7-day strenght was obtained as follows. Loam : q28=1.1050q7+7.59(r=0.9147) Sandy loam : q28=1.3905q7+3.17 (r=0.9801) 6. At the cement contents of above 50 per cent, the weight losses by freeeze-thaw test were negligible. At the cement content of below 8 per cent the weight losses were singnificantly high under low molding pressure and remarkably decreased with the increase of molding pressure up to 80kg/$\textrm{cm}^2$. 7. Resistance to damage from water and to absorption of water were not improved by molding pressure alone, but when the soil was mixtured with cement above 6 per cent, damage seldoms occurred and absorbed less than 5 per cent of water. 8. There was highly significant inverse-corelationship between the compressive strength of soil cement mixtures and their freeze-thaw loss as well as water absorption. By the regression equation methods, the relationships between them were expessed as followed fc=-7.3206Wa+115.6(r=0.9871) log fc=-0.0174L+1.59(r=0.7709) where fc=unconfined compressive stregth after 28-days curing. kg/$\textrm{cm}^2$ Wa=water absorption, % L : freeze-thaw loss rate, %

• 대한화학회지
• /
• 제40권2호
• /
• pp.109-116
• /
• 1996

물시료 중 존재하는 흔적량 게르마늄을 전열 원자흡수 분광광도법으로 정랑하기 위해 사용되는 매트릭스 개선제의 종류와 사용량, 이에 따를 회화 및 원자화 온도의 변화, 보조제의 사용여부 및 양에 관하여 연구하였다. 게르마늄은 회화단계에서 이산화 게르마늄이 흑연로 성분인 탄소로 인해 휘발성 일산화 게르마늄으로 환원되에 감도 및 재현성을 저하시킨다. 따라서 개선제를 사용하여 게르마늄을 열적 및 화학적으로 안정화시켜야 한다. 이를 위해 단일 개선제를 사용할 경우 파라듐이 가장 좋은 효과를 나타내었다. 이 경우 원자화온도는 변화시키지 않지만, 회화온도는 800.deg.C에서 1, 000.deg.C로 올릴수 있었고 흡광도도 증가하였다. 이런 조건에서 팔라듐의 농도가 게르마늄에 대해 몰비로 14-100인 10-70.mu.g/mL까지 흡광도가 일정하였다. 보조개선제의 사용도 검토하였는데, 1% 수산화암모늄을 가하여 회화온도를 1, 000.deg.C까지 증가시켰다. 이제까지 검토한 최적조건을 바탕으로 광천수 3가지를 분석한 결과 게르마늄이 2.46, 1.60 및 0.020.mu./mL이었다. 끝으로, 시료에 일정량의 게르마늄을 첨가하여 얻은 회수율은 모두 95%이상으로 정량적이라고 할 수 있고, 검출한계는 6.9ng/mL로 흔적량 게르마늄 분석에 유용한 것으로 판단되었다.

• KSBB Journal
• /
• 제28권5호
• /
• pp.319-326
• /
• 2013

This study was carried out to investigate the in vitro and in vivo moisturizing properties and percutaneous absorption of PEG-impregnated Aloe vera gel. The PEG-i-Aloe gel was obtained from dewatering and impregnation by soaking (DIS) of Aloe vera leaf slice. The moisturizing property of the obtained sample was evaluated by moisture determination using gravimetric method in desiccator under different RH% and by water sorption-desorption test on human skin. The transdermal penetration characteristics of PEG-i-Aloe gel was investigated by Franz diffusion cell in vitro transdermal absorption method. PEG-i-Aloe gel had high moisture retention ability and could significantly lead the enhancing skin hydration status as well as reducing the skin water loss due to the film formation as a skin barrier. The skin penetration rate of PEGi- Aloe gel at steady state was 9.76 ${\mu}g/(h{\cdot}cm^2)$ and the quantity of the transdermal absorption was 144 ${\mu}g/cm^2$ in 9 hr. The penetration mechanism was well fitted with Higuchi model ($R^2$ = 0.974-0.994). The results show that PEG-i-Aloe gel has the significant moisturizing effect and strong penetration of the animal skin. It could be used as the moisturizing additive in cosmetic skin products.

• BMB Reports
• /
• 제42권1호
• /
• pp.47-52
• /
• 2009

Alanine racemase catalyzes the interconversion of L-alanine and D-alanine and plays a crucial role in spore germination and cell wall biosynthesis. In this study, alanine racemase produced by Bacillus anthracis was expressed and purified as a monomer in Escherichia coli and the importance of lysine 41 in the cofactor binding octapeptide and tyrosine 270 in catalysis was evaluated. The native enzyme exhibited an apparent $K_m$ of 3 mM for L-alanine, and a $V_{max}$ of $295\;{\mu}moles/min/mg$, with the optimum activity occurring at $37^{\circ}C$ and a pH of 8-9. The activity observed in the absence of exogenous pyridoxal 5'-phosphate suggested that the cofactor is bound to the enzyme. Additionally, the UV-visible absorption spectra indicated that the activity was pH independece, of VV-visible absorption spectra suggests that the bound PLP exists as a protonated Schiff's base. Furthermore, the loss of activity observed in the apoenzyme suggested that bound PLP is required for catalysis. Finally, the enzyme followed non-competitive and mixed inhibition kinetics for hydroxylamine and propionate with a $K_i$of $160\;{\mu}M$ and 30 mM, respectively.

• Journal of Welding and Joining
• /
• 제35권3호
• /
• pp.28-34
• /
• 2017

The authors derived the criteria on the process parameters of laser depositions with metal powers(SUS316L & IN718) by evaluating the surface and cross-section properties of the deposition layers. The surface characteristics of the deposition layer are investigated through optical microscopy by controlling the process parameters of laser output, powder feeding rate and gas feeding rate. The cross-section characteristics were also analyzed after polishing and chemical etching process. As the gas feeding rate increased, the amount of powder loss increased and the difference in the dilution ratio and heat affected zone depending on laser outputs was observed. In addition, the powder feeding rate used in the experiment did not interfere with the energy absorption of the base material.

• Journal of Nutrition and Health
• /
• 제25권2호
• /
• pp.140-149
• /
• 1992

It was hypothesized that variations within the range of usual calcium(Ca) and sodium(Na) intakes of Korean influence bone mineral density(BMD) in healthy premenopausal women The relationship of nutrient intake urinary excretion physical activity and circulating IGF-1 level with spine({{{{ { L}_{2 } }}}}-{{{{ { L}_{4 } }}}}) and femur BMD was determined in 47 normal premenpausal women. There was a positive relationship between BMD of the lumbar spine and body weight. The BMD of femoral neck was positively correlated with Ca and protein intakes from animal source and circulating IGF-1 level. There was a negative relationship between femur BMD and both Na intake and urinary excretion. The complex interrelations between femur BMD regression analysis, From this analysis. Ca intake from animal origin was the only significnat Premenopausal women of femur BMD. In the basis of femur BMD three groups were divided Premenopausal women of femur BMD$\leq$0.84g/cm2 showed depressed Ca intake of animal origin in later and early life and enhanced urinary Na excretion compared to women of femur study suggests that dietary Ca is a major constituent affecting femur BMD because of a decrease in net Ca absorption and an increase in urinary Ca loss.

• Journal of Magnetics
• /
• 제21권2호
• /
• pp.187-191
• /
• 2016

Retrieving the equivalent electromagnetic parameters (permittivity and permeability) plays an important role in the research and application of metamaterials. Frequency dispersion of magnetic permeability has been theoretically predicted in a metamaterial composed of cut wire pairs (CWP) separated by dielectric substrate on the basis of circuit theory. Magnetic resonance resulting from antiparallel currents between the CWP is observed at the frequency of minimum reflection loss (corresponding to absorption peak) and effective resonator size can be determined. Having calculated the circuit parameters (inductance L, capacitance C) and resonance frequency from CWP dimension, the frequency dispersion of permeability of Lorentz like magnetic response can be predicted. The simulated resonance frequency and permeability spectra can be explained well on the basis of the circuit theory of an RLC resonator.

• 농업과학연구
• /
• 제17권1호
• /
• pp.45-51
• /
• 1990

본(本) 실험(實驗)은 동력경운기(動力耕耘機)에 탑재(搭載)되는 소형(小型)디젤기관(機關)의 냉각수(冷却水)의 적정량을 구명(究明)하기 위한 기초적(基礎的)인 실험(實驗)으로 냉각수(冷却水) 순환량(循環量) 15, 20, $25{\ell}/min$의 3수준(水準)으로, 변화(變化)시켰을 때의 기계손실(機械損失), 출력(出力), 연료소비율(燃料消費率), 토크, 냉각수흡열양(冷却水吸熱量), 열효율등(熱效率等)에 미치는 영향(影響)을 측정(測定) 분석(分析)한 결과(結果)는 다음과 같다. 1. 공시기(公試機)의 Motoring loss는 상용회전(常用回轉) 2,200rpm에서 1.371kW로 정격출력시(定格出力時)의 기계효율(機械效率)은 79.13%로 외국제품(外國製品)보다 약간(若干) 낮았다. 2. 냉각수(冷却水) 순환량(循環量)을 증가(增加)시킴에 따라 출력(出力)은 증가(增加)되는 경향(傾向)을 보였다. 3. 정격출력시(定格出力時) 연료소비율(燃料消費率)은 냉각수순환량(冷却水循環量) $20{\ell}/min$일때 282.93g/kW-h로서 가장 작게 나타났으며 이때 냉각수(冷却水)의 출구온도(出口溫度)는 $80.9^{\circ}C$이었다. 4. 냉각수(冷却水) 순환량(循環量)의 변화(變化)에 따른 토크의 변화(變化)는 거의 없었다. 5. 기관(機關)의 냉각수(冷却水) 흡열량(吸熱量)은 냉각수(冷却水) 순환량(循環量)의 증가(增加)에 따라 증가(增加)하는 경향(傾向)을 나타내었다. 6. 열효율(熱效率)은 냉각수(冷却水) 순환량(循環量) $20{\ell}/min$에서 32.31%로 가장 높게 나타났다.