• 한국응용과학기술학회지
• /
• 제39권5호
• /
• pp.614-622
• /
• 2022

본 연구는 라벤더추출물을 첨가한 제형제를 제조하여 손상된 모발에 도포할 때 미치는 영향에 대하여 알아보고자 하였다. 실험재료는 라벤더추출물 함량을 0 g, 3 g, 6 g, 9 g 으로 펌베이스제에 첨가하여 제조하였다. 제조한 제형제로 4개의 손상 모발 시료에 도포하여 비교 분석하였다. 손상 모발에 미치는 영향에 대한 측정방법은 인장강도, 메틸렌블루를 이용한 흡광도, 광택을 측정하였다. 연구결과의 신뢰성을 위해 통계분석을 하였다. 인장강도 측정결과는 8레벨에 6 g 과 9 g 을 함유한 제형제로 도포 한 시료의 인장강도가 증가하여 손상모발에 영향을 미치는 것을 알 수 있었다. 메틸렌블루를 이용한 흡광도 분석 결과 추출물을 첨가하여 도포 한 모든 시료의 흡광도가 감소하여 손상모발에 영향을 미치는 것을 알 수 있었다. 광택 측정 결과는 9 g 첨가시에 손상모발에 영향을 미치는 것을 알 수 있었다. 결론은 라벤더추출물이 손상된 모발에 영향을 미치는 것을 알 수 있어 모질 개선효과가 있을 것으로 생각된다.

• 한국응용과학기술학회지
• /
• 제39권2호
• /
• pp.294-302
• /
• 2022

본 연구는 바질 오일을 첨가한 모질 개선 제형제를 제조 후 손상된 모발에 도포하여 손상 모발의 개선 효과를 알아보고자 하였다. 실험원료로 바질 오일 함량을 0 g, 3 g 6 g, 9 g 으로 다르게 하여 펌베이스제에 첨가하여 제형제를 제조하였다. 제조한 제형제로 8레벨의 탈색한 시료 모발에 도포하였다. 각 시료와 손상모를 측정하여 비교 분석하였다. 측정방법은 모질 개선 효과를 알기 위해 인장강도, 메틸렌블루를 이용한 흡광도, 광택을 측정하였다. 연구결과의 신뢰성을 위해 통계분석을 하였다. 연구결과로 인장강도 측정결과는 바질 오일을 첨가하여 도포 한 모든 시료에서 손상모보다 인장강도가 증가함을 알 수 있었다. 메틸렌블루를 이용한 흡광도 분석결과 모든 시료에서 손상모보다 흡광도가 감소함을 알 수 있었다. 광택 측정결과는 모든 시료에서 손상모보다 광택이 증가함을 알 수 있었다. 결론은 바질 오일이 손상된 모발에 개선 효과가 있는 것을 알 수 있었다. 차후 다양한 오일의 종류와 연구방법으로의 연구가 필요하다.

• Fibers and Polymers
• /
• 제3권1호
• /
• pp.1-7
• /
• 2002

Cellulose carbonate was prepared by the reaction of cellulose pulp and $CO_2$ with treatment reagents, such as aqueous $Zncl_2$ (20-40 wt%) solution, acetone or ethyl acetate, at -5-$0^{\circ}C$ and 30-40 bar ($CO_2$) for 2 hr. Among the treatment reagents, ethyl acetate was the most effective. Cellulose carbonate was dissolved in 10% sodium hydroxide solution containing zinc oxide up to 3 wt% at -5-$0^{\circ}C$. Intrinsic viscosities of raw cellulose and cellulose carbonate were measured with an Ubbelohde viscometer using 0.5 M cupriethylenediamine hydroxide (cuen) as a solvent at $20^{\circ}C$ according to ASTM D1795 method. The molecular weight of cellulose was rarely changed by carbonation. Solubility of cellulose carbonate was tested by optical microscopic observation, UV absorbance and viscosity measurement. Phase diagram of cellulose carbonate was obtained by combining the results of solubility evaluation. Maximum concentration of cellulose carbonate for soluble zone was increased with increasing zinc oxide content. Cellulose carbonate solution in good soluble zone was transparent and showed the lowest absorbance and the highest viscosity. The cellulose carbonate and its solution were stable in refrigerator (-$5^{\circ}C$ and atmospheric pressure).

• 한국의류학회지
• /
• 제24권3호
• /
• pp.422-428
• /
• 2000

At present, analytical methods available for determining the amount of cationic surfactants(DSDMAC) on the fabrics are spectrophotometric method based on formation and extraction of the colored ion pair with anionic dye, radiochemical analysis and HPLC analysis. This study presents new analytical methods based on the formation of cationic surfactant(DSDMAC)-disulfine blue complex on the cotton fabric. Test methods for determining the amount of DSDMAC-disulfine blue complex on the cotton fabrics are measuring the reflectance of the colored fabric and the absorbance of the methanol solution of DSDMAC-disulfine blue complex extracted from dyed cotton fabric. Linear relationships between the K/S value of the fabric treated with DSDMAC followed by disulfine blue and the amount of DSDMAC sorbed by cotton fabric were obtained. Thus, the amount of DSDMAC sorbed by cotton fabric can be determined by K/S value of the fabric. DSDMAC-disulfine blue complex on the cotton fabric was extracted with methanol. The amount of DSDMAC sorbed by cotton fabric was estimated by measuring the absorbance of the methanol solution extracted from dyed cotton fabric.

• 대한화학회지
• /
• 제34권2호
• /
• pp.171-178
• /
• 1990

1,2-디클로로에탄에서 $[MoO_2(S_2CNC_4H_8)_2]$와 트리페닐포스핀 사이의 산소이동 반응에 대한 속도를 분광학적 방법으로 측정하였다. 514nm 부근에서 흡광도가 시간에 따라 증가하였다가 감소하는데, 이것은 반응의 중간단계에서 몰흡광계수가 큰$ [Mo_2O_3(S2_CNC_4H_8)_4]$이 생성되었다가 트리페닐포스핀과 더 이상 반응하면 몰리브덴(IV)가 생성되기 때문이다. 제 1단계에서는 $\mu$-옥소이합체의 생성이, 그리고 제 2단계반응에서는 옥소몰리브덴(IV)가 생성되는 반응과 관련된 메카니즘이 제시된다.

• 한국환경과학회지
• /
• 제22권8호
• /
• pp.999-1007
• /
• 2013

Electrochemical degradation of phenol was evaluated at DSA (dimensionally stable anode), JP202 (Ru, 25%; Ir, 25%; other, 50%) electrode for being a treatment method in non-biodegradable organic compounds such as phenol. Experiments were conducted to examine the effects of applied current (1.0~4.0 A), electrolyte type (NaCl, KCl, $Na_2SO_4$, $H_2SO_4$) and concentration (0.5~3.0 g/L), initial phenol concentration (12.5~100.0 mg/L) on phenol degradation and $UV_{254}$ absorbance as indirect indicator of by-product degraded phenol. It was found that phenol concentration decreased from around 50 mg/L to zero after 10 min of electrolysis with 2.5 g/L NaCl as supporting electrolyte at the current of 3.5 A. Although phenol could be completely electrochemical degraded by JP202 anode, the degradation of phenol COD was required oxidation time over 60 min due to the generation of by-products. $UV_{254}$ absorbance can see the impact of as an indirect indicator of the creation and destruction of by-product. The initial removal rate of phenol is 5.63 times faster than the initial COD removal rate.

• 복식
• /
• 제27권
• /
• pp.121-132
• /
• 1996

This study showed the proper pigment extract in the Phe. Dyeing which is the basic dye of the natural plants dyeing,. Also it compared and examined the K/S the promotion of the color fastness and the effect of color difference change were attended by mordants and method of mordanting. 1. The most absorbance of Phellodendron. sol-ution is 330nm berberine is 430nm. 2. The best and proper temperature to extrat Phe,. was 80 and dyeing solution for 24 hours. 3. The pH effect was stable in the absorbances and color differences change. 4. Mordanted group increased the absorbances compared to non-mordanted sample. In case depth the most absorbance of Al. Sn. K. Cu and C. A solution were in 3% Fe and Cr were in 5%. In the color difference change they became dark reduced greenish and increased yellowish when their absorbances were in 3% 5. K./S was recoginzed by tainnin and fe, K/S was more increased pre-mordants than post-mordants. 6. Fe is the unchangable mordant in the color difference change and pre-mordants is more stable than post-mordants in the difference color. 7. Generally light C. F indicated more than grade 2 and light C. F, was much improved in post-mordanted by alumium potassium potass-ium dichromate. Washing C.F was improved in mordanted by tainnin and ferrous suulfate mordanted group was better than non-mordanted sample. Perspir-ation C,F was more stable in acid than alkali. Dry cleaning C.F indicated more than grade. 4.

• 환경위생공학
• /
• 제13권3호
• /
• pp.58-65
• /
• 1998

Monodispersed $SiO_2/ZnO$ composite fine powders were prepared by Sol-Gel processing and their surface electrical and UV absorbance properties were investigated. Pseudomorph ZnO fine powders were microcapsuled by $SiO_2/ZnO$ sol fabricated using TEOS[tetraethylorthosilicate, purity 98% and ethanol as a solvent with $NH_3$ catalyst. The effects of experimental parameters such as molar ratio of starting materials on the final particle size and shape of $SiO_2/ZnO$ composite fine powder were discussed. As a result, we could controlled the size of monodispersed $SiO_2/ZnO$ composite fine powders without agglomeration, as well as the good dispersibility in aquous solution. The prepared powders were observed to have the mean particle sizes of $0.26-0.78{\mu}m$ with standard deviations of $0.020-0.063{\mu}m$.

• 분석과학
• /
• 제8권4호
• /
• pp.435-442
• /
• 1995

A matrix modification was studied for the determination of trace bismuth in water samples by graphite furnace atomic absorption spectrophotometry. The type and quantity of modifiers as well as the use of auxiliary modifiers were investigated to realize the efficient modification. Palladium was chosen as a single modifier. By the addition of palladium($5{\mu}g/mL$) to 100 ng/mL bismuth solution, the temperatures could be raised from $500^{\circ}C$ to $1,300^{\circ}C$ for the charring and from $2,000^{\circ}C$ to $2,200^{\circ}C$ for the atomization as well as the sensitivity and reproducibility were improved. The absorbance of bismuth was maximum and not changed in the range of Pd $3-25{\mu}g/mL$. And several materials were examined as an auxiliary modifier. The mixed solution of $1{\mu}g/mL$ palladium and $200{\mu}g/mL$ nickel have raised the temperatures as with $5{\mu}g/mL$ palladium only. The maximum absorbance of bismuth was shown in the nickel concentration range of $100-300{\mu}g/mL$ in $1{\mu}g/mL$ palladium modified system. With such optimum conditions, the trace amount of bismuth in several water samples could be determined by a calibration curve method, and good recoveries were also obtained.

• 한국염색가공학회지
• /
• 제10권1호
• /
• pp.11-19
• /
• 1998

For the purpose of standardization and practicability of dyeing by natural dyes, the mordanting and dyeing properties of cochineal and carminic acid were studied. Appropriate extraction, dyeing and mordanting condition of cochineal were determined, and the effect of mordanting method on dye uptake and color fastness of dyed fabric was investigated. The maximum absorbance of cochineal solution was 495nm, carminic acid was 533nm and 577nm. The color of carminic acid solution was affected by pH 6~9. The optimum temperature to extract cochineal was $80-100^\circ{C}$ and dyeing solution for 1 hour. And effective dyeing time to silk was 60min. Effective mordanting temperature was $80^\circ{C}$, and its time was 30min. In case mordants concentration, the maximum absorbance of Sn solution was 3%, K, Cu and Cr were in 1%. K/S value of dyeing fabrics was recoginazed by mordant treatment, specially Fe, Sn, Al, Cu. In the case of cochineal light fastness was increased by mordant treatment, specially Fe treatment. Perspiration fastness was good in acidic solution than in alkaline solution and perspiration fastness of cochineal was poor. Fastness of abrasion and dry-cleaning were good and these fastness improvement were generally effective for post-mordanting treatment.