• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.34 no.1
• /
• pp.1-8
• /
• 2011

Controlling industrial vehicle operated by human in warehouse was not simple since the information transfer for controlling the vehicle was not easy. However, as the technology for the WMS (Warehouse Management System) has been advanced and the PDA (Personal Digital Assistant) has come into wide use in a workplace, the control of man-operated vehicle became less difficult as do to AGVS (Automated Guided Vehicle System). This study examines the ways to improve the efficiency of warehouse operation through introducing rule of task assignment for the vehicles, particularly forklift. This study, basically, refer to AGV operation policy because a great number of studies for AGV dispatching rule have been done and the mechanism for the controlling vehicles is very similar. The workers in field prefer to simple dispatching rules such as Shortest Retrieval Time First (SRTF), Shortest Travel Time First (STTF), and Longest Waiting Time First (LWTF). However, these rules have potential disadvantage. Thus, several rules made up by combining rules mentioned above are introduced and these new rules use threshold value or evaluation formula. The effectiveness of these new rules are tested by simulation and the results are compared. This study proposes favorable dispatching rules for forklift in warehouse for the efficiency of the vehicle operation and stability of service level.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.7 no.7
• /
• pp.1721-1736
• /
• 2013

Black and gray hole attack is one kind of routing disturbing attacks and can bring great damage to the network. As a result, an efficient algorithm to detect black and gray attack is important. This paper demonstrate an adaptive approach to detecting black and gray hole attacks in ad hoc network based on a cross layer design. In network layer, we proposed a path-based method to overhear the next hop's action. This scheme does not send out extra control packets and saves the system resources of the detecting node. In MAC layer, a collision rate reporting system is established to estimate dynamic detecting threshold so as to lower the false positive rate under high network overload. We choose DSR protocol to test our algorithm and ns-2 as our simulation tool. Our experiment result verifies our theory: the average detection rate is above 90% and the false positive rate is below 10%. Moreover, the adaptive threshold strategy contributes to decrease the false positive rate.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2008.10a
• /
• pp.1203-1207
• /
• 2008

For a large sized, ultra definition (UD) and high refresh rate for motion blur free AMLCD TVs, amorphous IGZO thin film transistor (TFT) are applied and investigated in terms of threshold voltage ($V_{th}$) shift influenced by active layer thickness uniformity, source drain etching technology, heat treatment and passivation condition. Optimizing above parameters, we fabricated the world's largest 15 inch XGA AMLCD successfully.

• Journal of Industrial Technology
• /
• v.3
• /
• pp.33-38
• /
• 1983

The effect of various environmental conditions on the growth kinetics of Zymomonas mobilis were studied and the kinetic parameters were evaluated. The value of ${\mu}m$ was $0.45hr^{-1}$ and Ks was 0.23 g/L. Inhibition of growth at high glucose concentration was found to follow the threshold substrate inhibition. Threshold substrate concentration was 102 g/L and substrate inhibition constant was 196 g/L. The effects of yeast extract concentrations were found to follow the Monod equation. ${\mu}m$ value was $0.45hr^{-1}$ and Ks was 0.3 g/L at 20 g/L of glucose and $0.24hr^{-1}$ and 0.24 g/L respectively at 200 g/L of glucose. The optimum temperature was found to be $35^{\circ}C$ and the activation energy of growth was 7.7 Kcal/mole below $35^{\circ}C$ and -29 Kcal/mole above $35^{\circ}C$.

• Proceedings of the IEEK Conference
• /
• 1999.06a
• /
• pp.1063-1066
• /
• 1999

The delay of cardiac depolarization wave detection in the conventional pacemakers or AICD (automatic implantable cardioverter/ defibrillator, or ICD) has been overlooked. However, it is known that the delay may cause hemodynamic problems and may prevent the proper operation of a new automatic feature, automatic capture verification, that is to be appeared in the near-future devices. In order to reduce the effects of the delay, a delay prevention algorithm was developed and tested by applying three human electrograms. The algorithm set the sensing threshold just above the measured noise level to reduce the detection delay. It is found that the low threshold was able to reduce the delay by 20msec(average) In most cases. The implementation results showed reliability and efficacy of the algorithm, and the algorithm could be applicable to the existing hardware and software of the conventional pacemakers and AICD without any significant modifications.

• Proceedings of the KSME Conference
• /
• 2000.11a
• /
• pp.736-742
• /
• 2000

Mass removed from crystalline silicon samples during high power single-pulse laser ablation was studied by measuring the resulting crater morphology with a white light interferometric microscope. The volume and depth of the craters show a strong nonlinear change as the laser irradiance increases across a threshold value, that is, approximately $2.2{\times}10^{10}\;W/cm^2$. Time-resolved shadowgraph images of the ablation plume show the ejection of large particulates from the sample for laser irradiance above the threshold, with a time delay of about 300-400 nsec. The thickness of superheated liquid layer near the critical temperature was numerically estimated, considering the transformation of liquid metal into liquid dielectric near the critical state (i.e., induced transparency). The estimated thickness of the superheated layer at a delay time of 200 nsec agreed with the measured crater depths, suggesting that induced transparency promotes the formation of a deep superheated liquid layer which leads to an explosive boiling responsible for the sudden increase of crater volume and depth.

• Composites Research
• /
• v.17 no.5
• /
• pp.61-67
• /
• 2004

This paper reports the electrical conductivity and the stress-strain behavior of silver particle-filled silicone composite pastes for electromagnetic interference (EMI) shielding gasket materials. The percolation threshold (critical concentration) of the composite paste obtained by incorporating irregular sphere-shaped silver particles and room temperature vulcanizing (RTV) silicone resin was determined from the electrical conductivity result. At about 28 vol% Beading of untreated silver particles, the percolation phenomenon occurred and at this critical concentration, the volumetric resistivity, the tensile strength, and the elongation of the pastes were investigated. This work also suggests that the stress-strain characteristics of a composite paste filled with metal particles above the percolation threshold may be effectively improved by properly selecting a coupling agent.

• Korean Journal of Community Nutrition
• /
• v.15 no.5
• /
• pp.670-678
• /
• 2010

Recognition thresholds for NaCl, sucrose, citric acid, and caffeine, as well as the pleasant concentration of NaCl were assessed in 176 males and 312 females aged 50-88 years. Furthermore, relationships among taste sensitivities, taste preferences, and lifestyles were examined. The taste solutions were presented one after the other in ascending order using the sip-and-spit method. For the recognition thresholds of the 4 basic tastes, women perceived significantly lower concentrations than the men. However, the pleasant concentration of NaCl did not show a gender difference. Sensitivities for the 4 basic tastes did not decrease with age in the men, but they did significantly decrease with age for the women, especially for those above 70 years. For men, regular exercise was positively correlated with sensitivities for sour taste and bitter taste, and physical activity was negatively correlated with the pleasant concentrations of NaCl. For women, who had more physical activity, sensitivities for sweet taste and sour taste were lower compared to the others. This study indicates that the sensitivities for 4 basic tastes in water diminished with age, but pleasant salt concentration did not change with age. Further research on pleasant NaCl concentration is required to determine factors affecting salt preference, in order to decrease salt intake in the elderly.

• Journal of International Academy of Physical Therapy Research
• /
• v.7 no.1
• /
• pp.956-964
• /
• 2016

The purpose of this study was to identify the effects of continuous muscle strengthening applied to the antagonist of the sternocleidomatoid, upper trapezius, and pectoralis major, which are the shortened muscles of forward head posture(FHP) subjects, and Evjenth-Hamberg stretching(EHS) applied to the shortened muscles on changes in pressure pain threshold(PPT). Twenty subjects were divided into the continuous antagonist strengthening(CAS) group(n=10) and the EHS group(n=10), and each group performed its respective exercise three times a week for a six week period. The results were as follows: The comparison of changes in PPT within each group before and after the treatment showed a statistically significant difference(p<.05) according to the treatment period and a statistically significant difference according to the treatment period and method(p<.05). While the comparison of the tests of between subjects effects between the groups did not show a statistically significant difference, the CAS group exhibited better effects. The above results suggest that the combined application of CAS and EHS generates better effects on changes in PPT than the single application of EHS. Given that stretching and muscle strengthening exercises even for the short research period of six weeks could change the PPT, continuous exercises and a correct postural habit for a longer period of time are likely to help prevent chronic pain and correct FHP.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2006.05a
• /
• pp.487-488
• /
• 2006

Picosecond (ps) laser micro-machining has emerged as an attractive method of fabricating high-precision microstructures, especially in metals. In this paper, a metallic mold for diffraction gratings is fabricated with a mode-locked 12 Ps $Nd:YVO_4$ laser. Laser pulses with a wavelength of 355nm are irradiated on the surface of NOK 80, a mold material, to generate line patterns. In order to minimize the line width, laser power is set just above the ablation threshold of NOK 80. Results show that the spectrum from the fabricated mold is good enough for some industrial application.