• 한국세라믹학회지
• /
• 제32권1호
• /
• pp.90-94
• /
• 1995

In Sr-ferrite system, it has been attempted to inhibit the abnormal grian growth using Sr-ferrite powders synthesized by molten salt method as the matrix and the seeds, respectively. At each sintering temperature, the addition of seed more than 15% suppressed the abnormal grain growth, and the uniform microstructure resulted. Particularly, at 12$25^{\circ}C$, it was observed that the maximum number of the abnormal grain growth nuclei was achieved since the abnormal grain growth was suppressed even by the addition of 10% seed.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 하계학술대회 논문집
• /
• pp.466-469
• /
• 2002

In the sintering of YIG, abnormal grain growth phenomena was observed. This abnormal grain growth is related to the sintering temperature in this experiment. In the sintering below 145$0^{\circ}C$., the sintered body showed narrow size distribution. However, in the sintering at 145$0^{\circ}C$, a few grains grew rapidly with respect to other grains, and bimodal size distribution was appeared. Liquid phase was not observed far from the abnormally grown large grains, but only near the large grains. This means that the abnormal grain growth was caused by the nonuniform distribution of liquid phase which promote the grains growth. This nonuniform distribution of liquid phase was thought to be due to the nonuniform mixing of the starting materials. This abnormal grain growth was suppressed by enhance the compositional uniformity by multiple calcination.

• 한국세라믹학회지
• /
• 제34권8호
• /
• pp.791-796
• /
• 1997

The influence of Ti/Sr ratio on abnormal grain growth of Nb-doped SrTiO3 was investigated. For specimens which were isothermally sintered at temperatures above 144$0^{\circ}C$, the nucleation and growth rates of abnormal grain growth were decreased with increasing Ti/Sr ratio. But the onset time of abnormal grain growth was increased with increasing Ti/Sr ratio. The cross-section of abnormally grown grains was mostly hexagonal. When the specimens were quenched in air after they reached their setting temperatures at a heating rate of 3$^{\circ}C$/min, the onset temperature of abnormal grain growth was increased with increasing Ti/Sr ratio and the final grain size was independent of Ti/Sr ratio. The cross-section of abnormally grown grains was mostly rectangular.

• 한국세라믹학회지
• /
• 제32권5호
• /
• pp.587-593
• /
• 1995

Abnomal grain growth behavior of BaTiO3 ceramics was investigated with addition of seed grains. It was foudn that the nucleation rate of abnormal grain was constant and growth of abnormal grain was linearly increased with sitnering time, regardless of amount of seed grains. These facts were also confirmed by fitting of the volume fraction of abnormal grain vs. sintering time using Avrami type equation (n=4). It was suggested that seed grains did not change the nucleation rate or growth mechanism of abnormal grain but increase the number of abnormal grains at initial stage of sintering and then it led to fine microstructure of BaTiO3 ceramics.

• 한국세라믹학회지
• /
• 제37권7호
• /
• pp.617-624
• /
• 2000

Abnormal grain growth in alumina was investigated during sinter-HIP process for better understanding of pressure effect on microstructural development. Abnormal grain growth of monolithic alumina was observed near surface region rather than interior region of specimen. Finite element analysis was used to estimate the pressure distribution developed in the specimen. Pressure distribution analysis was in good agreement with grain size distributjion in the specimen. The results of finite element analysis provided that abnormal grain growth monolithic alumina was resulted from the inhomogeneous pressure distribution in the specimen. MgO addition in alumina was effective for the suppression of abnormal grain growth in alumina under inhomogeneous pressure distribution during sinter-HIP process.

• 한국결정성장학회지
• /
• 제29권6호
• /
• pp.251-256
• /
• 2019

ZnO를 통상적인 소결온도 이상의 온도 1385℃에서 소결하는 과정에서 mm 크기로 거대 성장된 입자를 갖는 세라믹스를 제조하였다. 1400℃에서 8시간 소결하는 경우 성장에 참여하지 않은 입자의 크기는 30~40 ㎛이고 거대 성장된 입자는 1,000 ㎛에 달하여 부피비 최소 10,000배 이상의 급속한 성장이 이루어졌다. 이러한 급속한 성장의 원인으로 일차 입자 크기분포, 성형압 불균일 또는 불순물의 합입등을 고려하였으며, 이들 중 일차입자 크기 분포일 것으로 추정되나 확실한 증거를 확보하지 못하였다. 미세구조 관찰을 통해 거대입자 성장은 주변의 입자를 통째로 합치는 과정을 통해 성장하는 것으로 추정된다.

• 한국세라믹학회지
• /
• 제39권1호
• /
• pp.21-25
• /
• 2002

Effect of abnormal grain growth and heat treatment time on the electrical properties of donor-doped semiconductive BaTiO$_3$ceramics was examined. La-doped BaTiO$_3$ceramics was sintered at 134$0^{\circ}C$ for different times from 10 to 600 min in order to change the volume fraction of the abnormal grains in samples. As a result, samples with different volume fraction of abnormal grain growth from 22 to 100% were prepared. The samples were annealed at 120$0^{\circ}C$ for various times. The resistivity of the sam-ples at room and above Curie temperature was examined. The complex impedance measurement as functions of the volume fraction of abnormal grains and annealing time was conducted. Separation of complex impedance semicircle was observed in a sample in which abnormal and fine grains coexist. The results are discussed from a viewpoint of microstructure-property relationship.

• 한국전기전자재료학회논문지
• /
• 제16권12호
• /
• pp.1131-1135
• /
• 2003

In the sintering of YIG, abnormal grain growth phenomena were observed. This abnormal grain growth is related to the sintering temperature in this experiment. In the sintering below 1450$^{\circ}C$, the sintered body showed narrow size distribution. However, in the sintering at 1450$^{\circ}C$, a few grains grew rapidly with respect to other grains, and bimodal size distribution was appeared. From the observation of the microstructure, liquid phase was not observed far from the abnormally grown large grains, but only near the large grains. This means that the abnormal grain growth was caused by the nonuniform distribution of liquid phase which promote the grains growth. Because the growth rate of grains near the liquid phase is much higher than that of the other grains, a few grains grow rapidly. This nonuniform distribution of liquid phase was thought to be due to the nonuniform mixing of the calcined powders. This abnormal grain growth was suppressed by enhancement of the compositional uniformity by multiple calcination.

• 한국세라믹학회지
• /
• 제32권2호
• /
• pp.147-154
• /
• 1995

Abnormal grain growth behavior of BaTiO3 ceramics with controlling of particle size distribution of calcined powder was investigated. The particle size distribution was controlled by changing the calcining temperature or by using of classification and regrinding process. With broadening of the normallized size distribution in calcined powder, it showeda normal grain growth behavior in sintered body due to an increase of volume fraction of seed grain in the calcined powder. It was supposed that the seed grains could easily contact each other for the rapid grain growth during sintering process and resulted in fast switching-over from abnormal to normal grain growth stage.

• 유통과학연구
• /
• 제12권4호
• /
• pp.85-92
• /
• 2014

Purpose - This study conducted empirical research on non-financial corporations listed on the stock exchange from 2001 to 2010, focusing on the effects of corporate governance on real earnings management of corporations. In particular, this study examined primarily the impact of the largest shareholder who could use earnings management to pursue his own self-interest, and foreign investors who played a checking role against the largest shareholders. The study also reviewed the relationship between corporate governance and earnings management while also considering corporate growth. Research design, data, and methodology - As for the measurements of real earnings management, abnormal operating cash flow and abnormal production cost were utilized. As for the independent variables, share ratio of the largest shareholder and affiliate person (M) and share ratio of foreign investors (FT) were leveraged. This study excluded those organizations that had changed their fiscal years, those that had not submitted an audit report, corporations under supervision, delisted corporations, corporations that had changed their business type, and so on, from the non-financial corporations out of the publicly traded corporations whose fiscal year ended in December from 2001 to 2010 in addition, KIS values were utilized for the corporate financial data in the study. To verify whether management structure and growth had an impact on real earnings management of a corporation through empirical analysis, a multiple regression analysis model was applied. Result - First, as a result of the analysis, the share ratio (M) of the largest shareholder and affiliate person was found to have a significant positive correlation with abnormal cash flow from operations(ACF) and abnormal production cost (APD). When controlling the growth, the share ratio (M) of the largest shareholder and affiliate person was found to have an insignificant correlation with abnormal cash flow from operations(ACF) but a significant correlation with abnormal production cost (APD). Second, foreign ownership (FT) was found to have a significant positive correlation with abnormal cash flow from operations(ACF) and abnormal production cost (APD) at the confidence level of 1 percent when not including the growth dummy. When controlling the growth, foreign ownership (FT) was found to have a significant negative correlation with abnormal cash flow from operations (ACF) and with abnormal production cost (APD). Conclusion - The results imply that the largest shareholder is closely related to earnings management through real activities regardless of corporate growth. It is also possible to determine from these results that foreign investors are related to earnings management through real activities when not considering corporate growth, but that they would reduce earnings management in the case of considering the growth. Thus, this study verified along with the existing studies that foreign investors were conducting the control function on controlling shareholders.