• Journal of the Korean Ceramic Society
• /
• v.36 no.12
• /
• pp.1327-1334
• /
• 1999

Behaviors of abnormal expansion during calcination process of Ba2Ti9O20 ceramics and its related effects on the sintering characteristics were investigated as a function of precursors. When BaCO3 and TiO2 powders were used as starting materials. BaTi4O9 phase which has relatively large molar volume was formed drastically with abnormal ex-pansion during the calcination at 95$0^{\circ}C$ to 115$0^{\circ}C$ ON the contrary using BaTiO3 and TiO2 powders as starting materials led to retardation of the formation of BaTi4O9 phase and concurrently suppressed the abnormal expansion during cal-cination process. Especially the calcined powder of BaTiO3 and TiO2 had advantages in the densification and formation of Ba2Ti9O20 single phase in the sintering process.

• Journal of the Korean Ceramic Society
• /
• v.22 no.6
• /
• pp.9-14
• /
• 1985

When the barium titanate is Synthesized in Solid-solid reaction the abnormal expansion occurs at about 110$0^{\circ}C$. The mixture was made of corresponding to the theoretical composition of barium titanate. The mixture was fired at various temperature from 90$0^{\circ}C$ to 130$0^{\circ}C$, After that the specimen was tested closely with XDR dilatometer and SEM. The results indicate that 1, The activation energy of barium titanate formation was 42 Kcal/mole. 2, Thermal expansion up to to 90$0^{\circ}C$ was mainly caused by $CO_2$ whereas it was mainly caused by the formation of the secondary phase above 100$0^{\circ}C$. 3. Thermal expansion was not influenced by the forming pressure up to 1000kg/$cm^2$ but it was largely influenced bythe forming pressure above 200kg/$cm^2$.

• Journal of the Korean Ceramic Society
• /
• v.23 no.4
• /
• pp.41-46
• /
• 1986

When barium titanate was synthesized in solid-solid reaction the abnormal expansion occurred from 90$0^{\circ}C$ to 110$0^{\circ}C$. The equi molecular mixture of $BaCo_3$ and $TiO_2$ was sintered from 90$0^{\circ}C$ to 130$0^{\circ}C$ on the condition of air vacuum and $CO_2$ atomosphere. After that the specimens were tested closely with XDR Dilatometer and SEM The result indicated that: 1, Volume expansion to be synthesized barium titanate in solid-solid reaction was affected by atomosphere sintering. 2. The solid reaction ot fiorm barium titanate in vacuum atomosphere occurred faster than that in air atomosphere. In vacuum atomosphere the maxium volume expansion was about 30% at 90$0^{\circ}C$ for 2hrs, 3. The solid reaction to form barium titanate in 4CO_2$ atomosphere occurred slower than that in air atomosphere. In $CO_2$ atomosphere the maximum volume expansion was 13% at 100$0^{\circ}C$ for 2 hrs. 4. According to the result of x-ray the expanison was caused by the reaction to form $BaTiO_3$ and change $Ba_2TiO_4$ into 4BaTiO_3$.

• Journal of Powder Materials
• /
• v.11 no.5
• /
• pp.383-390
• /
• 2004

In order to investigate behavior of abnormal expansion of the iron-copper compacts, we compared the dilatometric curves of the compacts which mixed the copper powder to the iron powder with those of compacts which mixed the copper powder to the iron-copper alloy powder. The dilatometric curves were obtained below the sintering conditions, which heated up to 115$0^{\circ}C$ by a heating rate of 1$0^{\circ}C$/min, held for 60min at 115$0^{\circ}C$ and cooled down at a rate of 2$0^{\circ}C$/min to room temperature. The dilatometric curves of the compacts showed the different expansion behavior at temperatures above the copper melting point in spite of same chemical composition. All of the compacts of former case showed large expansion, but all of the compacts in latter case showed large contraction. The microstructures of sintered compacts also showed the different progress in alloying of the copper into the iron powder. Namely we could observe the segregation at alloy part of copper into iron powder in case of the sintered compacts, which mixed the copper powder to the iron powder, but could not observe the segregation in compacts which mixed the copper powder to the iron-copper alloy powder. But the penetration of liquid copper into the interstices between solid particles was occurred at both cases. Therefore, the showing of the different dimensional changes in the compacts in spite of same chemical composition is due to more the alloying of copper into iron powder than the penetration of liquid copper into the interstices between solid particles.

• Journal of the Korean Ceramic Society
• /
• v.26 no.6
• /
• pp.783-788
• /
• 1989

The reason of abnormal expansion in BaTiO3 synthesized in the equimolecular mixture and synthesized in Ba-rich region were investigated at the point of crystal and microstructure. The shrinkage and the expansion of the mixtures in BaCO3-TiO2 system were determined by the mass of BaCO3 added to the equimolecular BaCO3 and TiO2, Ba2TiO4 which was much formed and BaTi2O3 were important crystal in the reaction of Ba-rich region. Sintering phenomena of unreacted BaCO3 activity and the secondary phase caused to generate microcracks in the specimens.

• Journal of Energy Engineering
• /
• v.23 no.3
• /
• pp.116-124
• /
• 2014

In the plants operated under high temperature condition, piping system load analysis is often performed to prevent accidents caused by thermal deformation and also to locate inspection prioritity points of the piping system. In this study, piping system stress analysis was performed for a pipe system between the reactors in a process plant. The piping system includes typically installed hangers and expansion joints. In order to evaluate the effects of structural components such as hangers and expansion joints, the case for the expansion joint or the hanger under abnormal operation is considered. By comparison anlaysis results of piping system during normal operation and abnormal operation, the role of each pipe components are studied.

• Journal of the Korean Ceramic Society
• /
• v.24 no.1
• /
• pp.41-46
• /
• 1987

When barium titanate was synthesized in soild-solid reaction the abnormal expansion occurred from 900$^{\circ}C$ to 1100$^{\circ}C$. The equi-molecular mixture of BaCO3 and TiO2 was sintered from 800$^{\circ}C$ to 1300$^{\circ}C$ on the condition of air, vacuum and CO2 atmosphere. After that the specimens were tested closely with XRD, Dilatometer, SEM and EDS. The result indicated that; 1. The crystal phase which was concerned with expansion of BaTiO3 was Ba2TiO4 as the intermediate crystal phase. 2. The formation of Ba2TiO4 was affected by the firing atmosphere. 3. The expansion occurred when BaTiO3 changed to Ba2TiO4 and pore also expanded by the expansion of BaTiO3 body just as the model of expansion.

• Transactions of the Korean hydrogen and new energy society
• /
• v.19 no.3
• /
• pp.182-188
• /
• 2008

In order to improve scavenging performance of free piston hydrogen fueled engine, this study estimate compatibility of uni-flow scavenging. The scavenging flow characteristics in the cylinder is investigated by flow visualization and PIV method. Consequently it has been found that the scavenging performance decreased with abnormal expansion of piston and delay of the exhaust valve opening timing. And the scavenging performance of exhaust valve located center in cylinder head is better than that of exhaust valve located side in cylinder head.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.3 no.6
• /
• pp.250-261
• /
• 1995

In this study, a rapid compression and expansion machine(RCEM) equipped with a swirl generator was designed and developed, in order to clarify normal and abnormal combustion(knocking phenomena). This RCEM is intended to simulate combustion process in actual automotive S.I.engines, having a high reproducibility in the compression stroke. Flame propagation and autoignition processes associated with normal and abnormal combustion were captured by the high speed schlieren photography. And swirl intensity. equivalence ratio and ignition position were varied to investigate the effect of turbulence, concentration in the unburnt gas region and flame propagation length. The knock intensity, knock mass fraction and knock mass fraction after autoignition were calculated by use of history of measured cylinder pressure.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.28 no.2
• /
• pp.1-8
• /
• 2024

The expansion joint is installed to offset the expansion of the superstructure and must ensure sufficient gap during its service life. In detailed guideline of safety inspection and precise safety diagnosis for bridge, damage due to lack or excessive gap is specified, but there are insufficient standards for determining the abnormal behavior of superstructures. In this study, a data-based maintenance was proposed by continuously monitoring the expansion-gap data of the same expansion joint. A total of 2,756 data were collected from 689 expansion joint, taking into account the effects of season. We have developed a method to evaluate changes in the expansion joint-gap that can analyze the thermal movement through four or more data at the same location, and classified the factors that affect the superstructure behavior and analyze the influence of each factor through deep learning and explainable artificial intelligence(AI). Abnormal behavior of the superstructure was classified into narrowing and functional failure through the expansion joint-gap evaluation graph. The influence factor analysis using deep learning and explainable AI is considered to be reliable because the results can be explained by the existing expansion gap calculation formula and bridge design.