• 한국재료학회지
• /
• 제28권4호
• /
• pp.235-240
• /
• 2018

We propose a speedy two-step deposit process to form an Au electrode on hole transport layer(HTL) without any damage using a general thermal evaporator in a perovskite solar cell(PSC). An Au electrode with a thickness of 70 nm was prepared with one-step and two-step processes using a general thermal evaporator with a 30 cm source-substrate distance and $6.0{\times}10^{-6}$ torr vacuum. The one-step process deposits the Au film with the desirable thickness through a source power of 60 and 100 W at a time. The two-step process deposits a 7 nm-thick buffer layer with source power of 60, 70, and 80 W, and then deposits the remaining film thickness at higher source power of 80, 90, and 100 W. The photovoltaic properties and microstructure of these PSC devices with a glass/FTO/$TiO_2$/perovskite/HTL/Au electrode were measured by a solar simulator and field emission scanning electron microscope. The one-step process showed a low depo-temperature of $88.5^{\circ}C$ with a long deposition time of 90 minutes at 60 W. It showed a high depo-temperature of $135.4^{\circ}C$ with a short deposition time of 8 minutes at 100 W. All the samples showed an ECE lower than 2.8 % due to damage on the HTL. The two-step process offered an ECE higher than 6.25 % without HTL damage through a deposition temperature lower than $88^{\circ}C$ and a short deposition time within 20 minutes in general. Therefore, the proposed two-step process is favorable to produce an Au electrode layer for the PSC device with a general thermal evaporator.

• 한국CDE학회논문집
• /
• 제5권1호
• /
• pp.23-32
• /
• 2000

In this paper, we present a Web-enabled product data sharing system for the support of RPD (Rapid Product Development) process by incorporating STEP (STandard for the Exchange of Product model data) with Web technology such as VRML (Virtual Reality Markup Language), SGML (Structured Generalized Markup Language) and Java. Extreme competition makes product life cycle short by incessantly deprecating current products with a brand-new one, and thus urges enterprises to devise a new product faster than ever. In this environment, an RPD process with effective product data sharing system is essential to outstrip competitors by speeding up the development process. However, the diversity of product data schema and heterogeneous systems make it difficult to exchange the product data. We chose STEP as a neutral product data schema and Web as an independent exchange environment to overcome these problems. While implementing our system, we focused on the support of STEP AP 203 UoF (Units of Functionality) views to efficiently employ STEP data models that are maximally normalized, and therefore very cumbersome to handle. Our functionality-oriented UoF view approach can increase users'appreciation since it facilitates the modular usage of STEP data models. This can also enhance the accuracy of product data. We demonstrate that our view approach is applicable to the configuration control of mechanical assemblies.

• 대한전자공학회논문지
• /
• 제23권6호
• /
• pp.888-894
• /
• 1986

In this paper, a phase locked loop control system is designed to have high performance and stability in a 2-phase bifilar winding PM step motor. The BODE diagram analysis method is used to improve the stability and dynamic characteristic of the closed loop control system. Also, a PLL servo is used to accomplish high-precision speed and to attain smooth ness. In applying the PLL control to the step motor, a new design method is suggested to solve the control problem which occurs as a result of the limited maximum acceleration of the step motor. A simple design method is suggested without using the complicated multi-step characteirstic of the step motor in constant voltage driving. Computer simulation results agree clorelg with experiments, indicating that the PLL servo system of the step motor designed is very useful.

• Journal of the Korean Wood Science and Technology
• /
• 제44권6호
• /
• pp.913-922
• /
• 2016

This study attempted to measure molecular weight (MW) of melamine-urea-formaldehyde (MUF) resins prepared by two different synthesis methods: the one-step MUF resins were synthesized in one batch procedure, while the two-step MUF resins were prepared by a physical mixing of urea-formaldehyde (UF) resin with melamine-formaldehyde (MF) resin that had been synthesized in a separate procedure. The properties of medium density fiberboard (MDF) panels bonded with two types of MUF resins were also investigated. MWs of these MUF resins were measured using gel permeation chromatography (GPC). In addition, this study measured the MWs of one-step MUF resin during its synthesis procedure. The performance of two types of MUF resins was evaluated by determining properties of MDF panels prepared in laboratory. As the synthesis procedure progressed, both number average MW ($M_n$) and weight average MW ($M_w$) of one-step MUF resin gradually increased, while the polydispersity index (PDI) decreased. And low Mw species of the resin predominantly decreased as the synthesis step progressed. The one-step MUF resin showed greater $M_n$ and $M_w$ than those of the two-step ones even though the PDI values of both resins were very similar each other. As expected, the one-step MUF resin resulted in better properties of MDF panels than those of two-step resins. In particular, the one-step MUF resin provided better internal bond (IB) strength and thickness swelling (TS) with MDF panels than those of two-step ones, indicating better water resistance of the one-step resin. These results suggest that the preparation method of MUF resins have a great impact on the MW and final panel properties.

• 한국재료학회지
• /
• 제4권4호
• /
• pp.459-465
• /
• 1994

a-측으로 배향된 $YBa_2Cu_3O_{7-\delta}$ 고온 초전도 박막을 $LaAIO_{3}$(100)단결정 기판에 이중 타게트 off-axis rf마그네트론 스퍼터링법으로 증착하였다. 박막은 기판온도(Ts)$590^{\circ}C$와 $680^{\circ}C$사이에서 단일공정으로 증착하는 one-step방법과, $590^{\circ}C$의 저온에서 a-축으로 배향된 YBCO박막(두께-30nm)을 면저 만들어 틀로 작용시킨 후 그 틀위에 나머지 부분을 기판온도를 승온하면서 증착하는 방법인 two-step방법 등 두 가지 방법을 사용하여 증착시켰다. one-step방법에서는 $T_s$가 증가함에 따라 감소하였으며, ($00 \ell$)피크는 증가하였다. Two-step방법으로 증착한 박막은 증착속도가 감소함에 따라 (h00)피크가 우세하게 나타났다. 박막의 미세구조는 a-축, c- 축 배향성이 혼재하여 핀홀과 같은 결함들이 생성되었다. 모든 경우 $T_s$가 감소함에 따라 a-축 배향성은 우세하였으나 전기적 특성은 저하되었고, 긴 전이온도 폭을 가졌다.

• 한국임상수의학회지
• /
• 제35권2호
• /
• pp.39-45
• /
• 2018

We evaluated the effects of green tea extract (GTE) supplementation at different dilution steps on boar sperm freezing and in vitro fertilization. Sperm intracellular hydrogen peroxide ($H_2O_2$), motility, viability, acrosome integrity and morphology were determined. In addition, sperm IVF parameters (penetration and monospermy) and glutathione (GSH) levels of presumptive zygotes (PZs) were evaluated. Semen was diluted in lactose egg yolk (LEY) and cooled at $5^{\circ}C$ for 3 h (first dilution step) and then diluted in LEY with 9% glycerol and maintained at $5^{\circ}C$ for 30 min (second dilution step). Four experimental groups were compared: first and second dilution steps without GTE (control), first dilution step with GTE (Step 1), second dilution step with GTE (Step 2) and first and second dilution step with GTE (Step 1+2). The spermatozoa were frozen in nitrogen vapor. Higher sperm motility, viability and acrosome integrity after thawing were observed in Step 1, Step 2 and Step 1+2 groups compared with the control (P < 0.05). Lower $H_2O_2$ level was observed in Step 1+2 compared with control and Step 1 (P < 0.05). For IVF, matured oocytes were co-cultured with spermatozoa frozen according to the experimental groups. GSH levels of PZs were significantly higher in Step 2 and Step 1+2 than in control and Step 1 (P < 0.05) without a significant difference in IVF parameters. In conclusion, supplementation with GTE in both first and second dilution steps during the freezing process resulted in better boar sperm cryopreservation and might be beneficial for further embryo development.

• Korean Chemical Engineering Research
• /
• 제53권6호
• /
• pp.682-689
• /
• 2015

A two-step process was investigated for pretreatment and fractionation of rice straw. The two-step fractionation process involves first, soaking rice straw in aqueous ammonia (SAA) in a batch reactor to recover lignin-rich hydrolysate. This is followed by a second-step treatment in a fixed-bed flow-through column reactor to recover xylo-oligomer-rich hydrolysate. The remaining glucan-rich solid cake is then subjected to an enzymatic process. In the first variant, SAA treatment in the first step dissolves lignin at moderate temperature (60 and $80^{\circ}C$), while in the second step, hot-water treatment is used for xylan removal at higher temperatures ($150{\sim}210^{\circ}C$). Under optimal conditions ($190^{\circ}C$ reaction temperature, 30 min reaction time, 5.0 ml/min flow rate, and 2.3 MPa reaction pressure), the SAA-hot-water fractionation removed 79.2% of the lignin and 63.4% of the xylan. In the second variant, SAA was followed by treatment with dilute sulfuric acid. With this process, optimal treatment conditions for effective fractionation of xylo-oligomer were found to be $80^{\circ}C$, 12 h reaction time, solid-to-liquid ratio of 1:12 in the first step; and 5.0 ml $H_2SO_4/min$, $170^{\circ}C$, and 2.3 MPa in the second step. After this two-step fractionation process, 85.4% lignin removal and 78.9% xylan removal (26.8% xylan recovery) were achieved. Use of the optimized second variant of the two-step fractionation process (SAA and $H_2SO_4$) resulted in enhanced enzymatic digestibility of the treated solid (99% glucan digestibility) with 15 FPU (filter paper unit) of CTec2 (cellulase)/g-glucan of enzyme loading, which was higher than 92% in the two-step fractionation process (SAA and hot-water).

• 한국컴퓨터정보학회논문지
• /
• 제29권5호
• /
• pp.123-129
• /
• 2024

구급대원에게 심폐소생술은 매우 중요하나 이동하는 주들것에서 수행하는 가슴압박은 정확도가 떨어진다. 이 연구의 목적은 이동 중 주들것에서 수행하는 심폐소생술 효과를 높이기 위하여 C-step을 이용하여 주들것의 측면에서 가슴압박을 수행하는 것과 환자의 복부 위에 위치하여 가슴 압박을 수행하는 것에 대하여 차이를 알아보고자 수행되었다. 연구는 C-step 군 20명과 복부 위군 20명을 대상으로 이동 중 주들것에서 2분간 연속된 가슴압박을 수행하였다. 연구결과 C-step을 적용한 군에서 적정한 깊이(t=4.132, p=.000)와 속도(t=7.177, p=.000)를 나타내었으며 정확도가 더 높은 것으로 나타났다(t=6.774, p=.000). 또한 C-step을 적용한 군에서 위치불량(t=-5.197, p=.008)과 너무 얕은 오류가 적은 것으로 나타났다. 결론적으로 C-step을 장착한 주들것에서의 가슴압박은 심폐소생술의 질을 높이고 병원 전 환자의 생존율을 높이는데 도움을 줄 것으로 판단된다.

• 산업기술연구
• /
• 제19권
• /
• pp.59-65
• /
• 1999

This study is to analyze turbulent flow over a backward-facing step in a rectangular duct. The side wall effects on the internal flow were determined by varying the aspect ratio(defined as the step span-to-height ratio) from 1 to 20. In the flow behind a backward-facing step, separation, recirculation and redeveloping is occurred frequently. These phenomena appear in a particular variation by varying the aspect ratio. The results show that the aspect ratio has an influence on the velocity and reattachment length. When the AR is increased, the reattachment length is increased. For 6 over aspect ration, the rate of increase is decreased. The length of recirculation in the upper corner is increased, as the increase of aspect ration. It's width is not changed in the variation of aspect ration. The transverse, streamwise and spanwise velocities were decreased along the flow down stream of the step.

• 한국산업정보학회논문지
• /
• 제4권3호
• /
• pp.79-88
• /
• 1999

적응 신호처리 분야에서 LMS(Least Mean Square)알고리즘은 그 식의 간편함과 구현의 용이함으로 가장 널리 이용되고 있다. 대부분의 LMS 알고리즘은 수렴비를 조절하는 적응계수를 일정한 값으로 정하는데, 이는 안전성과 속도사이에서 트레이드오프가 존재한다. 이러한 단점을 해결하고 성능을 개선하기 위하여 가변 LMS(VLMS: Variable LMS)가 발표되었다. 그러나 기존에 발표된 알고리즘들은 급격한 환경변화에 적응하지 못하고 발산하는 경우도 있으며 수렴속도에 문제가 있다. 본 논문에서는 기존의 적응계수의 특성을 일부 변형시킴으로서 계산량을 줄이고, 급격한 환경변화에서도 수렴하도록 하는 새로운 알고리즘을 제안하였다. 제안한 적응계수의 성능 확인을 위하여 시스템 식별 및 잡음 제거 시스템에 적용하여 기존의 알고리즘들과 비교하였다.