• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2008년도 International Meeting on Information Display
• /
• pp.91-93
• /
• 2008

The organic field-effect transistors with step-edge structure were fabricated. Source and drain electrodes were obliquely deposited by vacuum evaporation. The step-edge of the gate electrode serve as a shadow mask, and the short channel is formed at the step-edge. The excellent device performances were obtained.

• 한국전문물리치료학회지
• /
• 제13권4호
• /
• pp.79-86
• /
• 2006

The purpose of the current experiment was to describe interlimb coordination when swing limb conditions are being manipulated by constraining step length or by adding a 5 or 10 pound weight to the swing limb distally. Subjects were asked to begin walking with the right limb to land on the primary target (normal step length) that is 10 cm in diameter. However, if, during movement, the light was illuminated, then the subject had to step on one of the secondary targets (long and short step length). These three step length conditions were repeated while wearing a 5 pound ankle weight and then when wearing a 10 pound ankle weight. Ground reaction force (GRF) data indicated that there were changes in the forces and slopes of the swing and stance Fx GRFs. Long stepping subjects had to increase the propulsive force required to increase step length. Consequently, swing and stance toe-off greatly increased in the long step length condition. Short step length subjects had to adequately adjust step length, which decreased the speed of gait initiation. Loading the swing limb decreased the force and slope of the swing limb. Swing and stance toe-off was longest for the long step length condition, but there was a small difference of temporal events between no weight and weight condition. It appears that subjects modulated GRFs and temporal events differently to achieve the peak acceleration force of the swing and stance limb in response to different tasks. The findings from the current study provide preliminary data, which can be used to further investigate how we modulate forces during voluntary movement from a quiet stance. This information may be important if we are to use this or a similar task to evaluate gait patterns of the elderly and patient populations.

• 대한치과의사협회지
• /
• 제57권8호
• /
• pp.437-447
• /
• 2019

Purpose: In recent years, efforts to improve the dental curriculum in South Korea have focused on a shift to outcome-based dental education based on core competencies in dentistry. So far, the field has seen various studies on the development of competencies, performance evaluation, and the importance of outcome-based education, but few studies have documented the development of such an education model. Therefore, this study develops an OBE curriculum for dentistry education and describes the development procedures and then finally this study intends to share our experience to other dental schools. Methods: This study introduces the development procedure and details of an outcome-based education model for dental education and presents the five stages of an outcome-based education model. In this study, 3 educational experts and 2 dental professor composed the TFT and developed the research method according to the ADDIE model. Step 1 is to conduct quantitative / qualitative research analysis through some survey and interview, Step 2 is to do a survey to revise competency, Step 3 is to develop a materials through consensus and participation of our professors of the dental school, Step 4 is to do some workshops, Step 5 is to prepare and conduct a outcome evaluation. Results: Step 1 is a required process for developing an educational model: the Job Analysis & Need Analysis stage. Step 2 is the Development of Outcome and Competency stage, which involves revising the competencies that are the basis of the curriculum. Step 3 is developing competency descriptions, competency levels, and evaluation criteria?the Development of Outcomes and Evaluation Standards. Step 4 is the Development of Milestones for Curriculum and Instructional Strategy, which examines the curriculum's problems and analyzes the improvements of each course. Step 5 is the Evaluating Outcomes stage, conducted based on the competencies specified by the target dental school. Conclustion: The model presented here can serve as a foundation for outcome-based education in other dental schools.

• PNF and Movement
• /
• 제1권1호
• /
• pp.33-41
• /
• 2003

Objectives : The purpose of this study was to describe and compare the temporo-spatial gait characteristics of healthy young people with those of healthy elderly people. Methods: The data were collected by 40 volunteers. 20 subjects were between 20 and 31 years of age, and 20 subjects were between 65 and 84 years of age. Temporal and spatial parameters of gait were analysed for using the computerized GAITRite system. Results : The system integrates specific components of locomotion to provide a single, numerical representation of gait, the Functional Ambulation Performance score. Differences in gait characteristics between the two groups were examined using a correlated t-test(p<.05). Significant differences were observed between the groups for step length, step/extremity ratio and velocity. Young people demonstrated a significantly larger velocity, step length and step/extremity ratio than the elderly people. Conclusions: These results indicate that the GAITRite system can be useful in detecting footfall patterns and selected time and distance measurements of young and older persons. Additionaly, differences in walking velocity, step length and step/extremity ratio between old and young people may have influenced the gait characteristics measured.

• 한국군사과학기술학회지
• /
• 제9권3호
• /
• pp.132-140
• /
• 2006

In this paper, a new fault detection method for the extended Kalman filter, which uses a N-step predictor, is proposed. The N-step predictor performs the only time propagations for N-step intervals without measurement updates and its output is used as a monitoring signal for the fault detection. A consistency between the extended Kalman filter and the N-step predictor is tested to detect a fault. A test statistic is defined by the difference between the extended Kalman filter and the N-step predictor. The proposed method is applied to strapdown inertial navigation system (SDINS). By computer simulation, it is shown that the proposed method detects a fault effectively.

• 한국전자거래학회지
• /
• 제8권1호
• /
• pp.121-139
• /
• 2003

Currently, it is not popular to use the STEP based product information in the construction drawing files, in spite of the importance and possibility of using various product data in drawing files on the CALS/EC environment. This paper aims to demonstrate a construction drawing information management system based on ISO 10303/STEP. To achieve this aim, the authors have analyzed the current construction drawing information classification hierarchy widely used for domestic and international, and examined the material data connection mechanism within CAD drawing data, and finally investigated the management systems for construction documentations and drawings in a public companies. Therefore, the expected benefit of the proposed system is that STEP drawing information management will be done standardization and the information of STEP construction drawing can be managed, shared and supported design business through materials data connection.

• 제어로봇시스템학회논문지
• /
• 제19권7호
• /
• pp.640-645
• /
• 2013

This paper presents a step length estimation algorithm for Pedestrian Dead Reckoning using linear calibrated ZUPT (zero velocity update) with a foot mounted IMU. The IMU consists of 3 axis accelerometer, gyro and magnetometer. Attitude of IMU is estimated using an inertial navigation algorithm. To increase accuracy of step length estimation algorithm, we propose a stance detection algorithm and an enhanced ZUPT. The enhanced ZUPT calculates firefighter's step length considering velocity error caused by sensor bias during one step. This algorithm also works efficiently at various motions, such as crawling, sideways and stair stepping. Through experiments, the step length estimation performance of the proposed algorithm is verified.

• 한국CDE학회논문집
• /
• 제4권4호
• /
• pp.295-311
• /
• 1999

An increasing attention is paid to STEP-NC, the next generation CNC controller interfacing STEP-compatible data. In this paper, we first propose an Architecture for the STEP-NC (called FBCC: Feature Baled CNC Controller) accepting feature code compatible with STEP-data, and executing NC motion feature by feature while monitoring the execution status. The main thrust of the paper has been to develop an automatic on-line tool path generation and modification scheme for milling operation. The tool path it generated iota each feature by decomposing into a finite number of primitive features. The key function in the new scheme is haw to accommodate unexpected execution results. In our scheme, the too1 path plinker is designed to have a tracing capability iota the tool path execution so that a new path can be generated from the point where the operation is stopped. An illustrative example is included to show the capability of the developed algorithm.

• 대한전기학회논문지:전력기술부문A
• /
• 제48권3호
• /
• pp.190-196
• /
• 1999

Continuation power flow has been developed to remove the ill-condition problem caused by singularity of power flow Jacobian at and near at steady-state voltage instability point in conventional power flow. Continuation power flow consists of predictor and corrector. In prddictor, the direction vector at the resent solution is caluculated and the initial guess of next solution is determined at the distance of step length. The selection of step length is a very important part, since computational speed and convergence performance are both greatly affected by the choice of the step length. This paper presents the practical step length selection algorithm using the reactive power generation sensitivith. In numulation, the proposed algorithm is compared with step length selection algorithm using TVI(tangent vector index).

• 동아시아식생활학회지
• /
• 제1권2호
• /
• pp.115-127
• /
• 1991

Information on brew time for Samhaeju can get from the 26 kinds of classical literature, which deal with Samhaeju. Usually, Samhaeju is brewed on any day of the Boar in January of the lunar calendar. However, any day of the Boar in a year seams to be possible for the brew time. In the first step of the manufacture procedure, nonglutinous and glutinous rice are used with the same propontion. The nonglutious and glutinous rice ratio become higher on the 2nd and the 3rd step than in the 1st step. The amount of water adding to the Samhaeju-base is increased step by step. In the first step, processing type of the cereal is predominantly gruel type, which is followed by rice calce. In the 2nd step, rice cake and doughnut-type rice cake are more common type than gruel type. In the 3rd step, processing type of the cereal in Samhaeju is mostly steamed water-soaked rice. Companing China and Japan with Korea, there is difference in the processing types of the cereal. They use steamed water-soaked rice in any step. Nuruk(fermenter) is added to the cold processed cereal in the first step.