• KSBB Journal
• /
• 제15권6호
• /
• pp.635-643
• /
• 2000

To compare the antioxidative activities of fish skin and bovine skin gelatin hydrolysate, gelatin hydrolysates from Alaska pollack and bovine skin were prepared by various enzymatic hydrolysis methods (1st step, Alcalase; 2nd step, pronase E; 3rd step, collagenase) using a continuous three-step membrane reactor. The molecular weight distributions of the 1st, 2nd and 3rd step hydrolysates were 7∼10 kDa, 2∼5 kDa and 0.7∼0.9 kDa, respectively. The antioxidative activity of fish skin gelatin hydrolysate was stronger than that of bovine skin gelatin hydrolysate, and in particular, both of 2nd step hydrolysates showed more antioxidative activity than hydrolysates of any other step. The optimum antioxidative activity concentration of the 2nd step hydeolysates of fish and boving skin were 1% (w/w) in a linoleic acid water-alcohol emulsion. In cultured cells exposed to t-butyl hydroperoxide (t-BHP), the 2nd step hydrolysate of fish skin gelatin delayed cell death most. These results suggest that the antioxidative activity of fish skin gelatin hydrolysate is higher than that of bovine skin gelatin hydrolysate because of their different amino acid contents.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1986년도 한국자동제어학술회의논문집; 한국과학기술대학, 충남; 17-18 Oct. 1986
• /
• pp.377-382
• /
• 1986

This paper describes the modelling method of hybrid step motors including magnetic saturation effects of iron parts and the simulation for design of a prototype. Based on the above procedure, the prototype of a step motor is produced and its characteristics are discussed.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1996년도 한국자동제어학술회의논문집(국내학술편); 포항공과대학교, 포항; 24-26 Oct. 1996
• /
• pp.432-435
• /
• 1996

The performance of one-column isothermal PSA process is assessed by dynamic simulator, gPROMS. The four-step and five-step processes are compared. A five-step process is employed in order to show the effect of the addtional cocurrent depressurization step on the four-step PSA process. Two processes parameters, purity and recovery of SO$_{2}$ are used for the performance comparison. The results of dynamic simulation show that four-step process is superior to five-step process in recovery, but not in purity.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2007년도 춘계학술대회 논문집
• /
• pp.722-729
• /
• 2007

The methodology for maintenance system development should overall be considered with all of task characteristic, schedule, and the technical condition of investment sources. This research applies Waterfall model to methodology for the development and construction of maintenance system through customizing the CD (Custom Development) procedure of "HSDM (Hyundai System Development Methodology)" based on information engineering. The waterfall model called as classic life cycle paradigm is defined for the sequent development procedure, which make progress a next step after that a previous step is admitted with thorough review. This model which is popular and the oldest paradigm is used for system development by four steps; demands analysis, design, construction, and maintenance. This methodology advances higher abstract step from higher lower step using top-down approach from concept definition to construction, which notices the end of a step whenever a step is over. Therefore, each step is exactly divided, and consequently the output is clearly yielded.

• 한국전자거래학회지
• /
• 제7권2호
• /
• pp.39-53
• /
• 2002

In the Korean domestic construction field, there are a lot of problems related to construction information exchange and sharing owing to the absence of construction drawing information exchange standard. To remedy the aforementioned inefficiency effectively, it is necessary to apply the STEP standard which is known as an international standard for achieving the establishment of Construction CALS. This study focus on suggesting a methodology to activate the STEP based construction drawing information exchange standard to the current construction drawing information exchanging and sharing practice. In this paper, the domestic and foreign standardization projects related to the construction drawing information have been investigated and analyzed. In addition, a methodology of applying and activating the STEP standard has been suggested. Finally, a verification and certification methodology for applying the CALS/EC construction drawing information exchange standard(STEP) have been suggested.

• Structural Engineering and Mechanics
• /
• 제75권5호
• /
• pp.585-594
• /
• 2020

Detecting the damage of indeterminate trusses is of major importance in the literature. This paper proposes a quick approach in this regard, utilizing a precise mathematical approach based on Finite Element Method. Different to a general two-step method defined in the literature essentially based on optimization approach, this method consists of three steps including Damage-Suspected Element Identification step, Imminent Damaged Element Identification step, and finally, Damage Severity Detection step and does not need any optimizing algorithm. The first step focuses on the identification of damage-suspected elements using an index based on modal residual force vector. In the second step, imminent damage elements are identified among the damage-suspected elements detected in the previous step using a specific technique. Ultimately, in the third step, a novel relation is derived to calculate the damage severity of each imminent damaged element. To show the efficiency and quick function of the proposed method, three examples including a 25-bar planar truss, a 31-bar planar truss, and a 52-bar space truss are studied; results of which indicate that the method is innovatively capable of suitably detecting, for indeterminate trusses, not only damaged elements but also their individual damage severity by carrying out solely one analysis.

• 한국CDE학회논문집
• /
• 제5권3호
• /
• pp.215-223
• /
• 2000

The product data exchange between heterogeneous CAB and PDM systems is a crucial issue for the integration of product development systems. STEP offers an efficient mechanism of product data exchange between heterogeneous systems. This paper introduces a UML-based mapping methodology for the product data models. The suggested mapping method has been applied to exchange the product structure data between CAD and PDM systems. Based on the STEP methods, we developed an interface module between a CAD system and a PDM system.

• International Journal of Reliability and Applications
• /
• 제15권2호
• /
• pp.85-98
• /
• 2014

Accelerated life testing (ALT) is a well famous technique in life testing and reliability studies, this is particularly used to induce so high stress leading to failure of the highly reliable units quickly under stipulated duration of time. The step-stress ALT is one of the systematic experimental strategy of ALT applied to fail the units in steps. In this article we focus on two important issues (i) necessity of life tests at higher steps with relevant causes (ii) to develop a new optimum test plan for 3-step SSALT under the modified cumulative exposure model proposed by Khamis and Higgins (1998). It is assumed that the lifetime of test units follows Rayleigh distribution and its scale parameter at constant stress level is assumed to be a log-linear function of the stress. The maximum likelihood estimates of the parameters involved in the step-stress ALT model are obtained. A simulation study is performed for numerical investigation of the proposed new optimum plan 3-step, step-stress ALT. The necessity of the life test units at 3-step step-stress is also numerically examined in comparison to simple step-stress setup.

• 한국정밀공학회지
• /
• 제19권7호
• /
• pp.171-179
• /
• 2002

STEP-NC is the next generation CNC controller taking STEP-based data model as the interface scheme (or language) between CAM and CNC, and carrying out various intelligent functions. At the moment, efforts are being made worldwide to establish international standard for the new interface scheme formalized as ISO14649. As the new language is being established, increasing attention is being paid to the development of the new CNC. Korea STEP-NC is an integrated STEP-NC system taking ISO 14649 as an input, and carrying out various intelligent functions. It is composed of 5 modules: 1) Shop Floor Programming System (PosSFP), 2) Tool Path Generator (PosTPG), 3) Tool Path Viewer (PosTPV), 4) Man Machine Interface (PosMMI), and 5) CNC Kernel (PosCNC). Distinguished from other prototypes (of Europe and USA), the Korea STEP-NC is top-down designed, and bottom-up implemented comprehensively incorporating all the crucial components for realizing the full benefit of STEP-NC paradigm, without using any existing commercial CAD/CAM systems and CNC kernels. The Korea STEP-NC prototype was successfully demonstrated and evaluated in the ISO conventions Together with prototypes of Europe and USA, Korea STEP-NC will be used as a reference system fur the Triangular Conformance Test to be jointly carried out by ISO TC184 SC1, SC4, and IMS Project.

• 생명과학회지
• /
• 제31권4호
• /
• pp.385-388
• /
• 2021

벼 육종을 위한 약 배양은 기존 육종 방법을 사용하여 새로운 품종을 개발하는데 최소 6세대에 필요한 시간을 크게 줄여 동형접합자를 신속하게 생산하는 방법이다. 이 약 배양기술은 방법론적 관점에서 더 많은 녹색 식물을 얻을 기회를 제공하며, 약 배양에서 시간과 노력을 절약하는 배양의 효율성을 높이기 때문에 중요하다. 본 연구에서는 배양액과 배양 방법이 다른 1단계와 2 단계 배양의 캘러스 유도율과 녹색 식물 재분화율로 비교하였다. 1단계 배양은 하나의 배지에서 캘러스 유도 및 식물 재생을 허용하는 반면, 2 단계 배양은 두 개의 다른 배지에서 유도 및 식물 재분화가 필요하다. 이 연구에서는 1 단계 및 2 단계 배양으로 벼 꽃밥의 캘러스 유도와 식물 재생률을 비교했다. 캘러스 형성률은 1 단계 배양의 경우 13.0 %, 2 단계 배양의 경우 8.6%로 2 단계 배양보다 1 단계 배양에서 4.4% 더 높았다. 식물 재분화율은 1 단계 배양에서 1.0%, 2 단계 배양에서 3.0 %로 1 단계 배양보다 2단계 배양에서 식물체 재분화율이 3배 더 높았다. 이것은 2 단계 배양이 반수체 생산을 위한 1 단계 배양보다 더 효율적임을 시사한다.