• 한국결정성장학회지
• /
• 제2권2호
• /
• pp.40-52
• /
• 1992

Titanium-iso-propoxide[$Ti(OC_3H_7)_4$]와 Tetra-ethyl-lead $[Pb({C_2}{H_5})_4]$를 사용한 MOCVD법으로 PbTi$O_3$박막을 55$0^{\circ}C$에서 증착하였다. Ar과 $O_2$를 각각 운반 및 반응기체로 사용하였으며, 열처리에 따른 박막의 두께와 굴절지수의 변화, Xtjs 회절 분석, CV 특성 측정등을 행하였다. 열처리에 따른 CV 특성 측정 결과 PbTi$O_3$는 Si기판과 계면 반응을 하는 것으로 생각되며, X선 회절 분석 결과 $PbTiO_3$의 특성 peak들이 관찰되었다. 열처리 시간 및 온도의 증가에 따라 박막의 두께는 감소하고, 굴절지수는 증가하는 경향을 보여 주었다.

• Current Photovoltaic Research
• /
• 제2권3호
• /
• pp.103-109
• /
• 2014

Highly efficient hydrogenated nanocrystalline silicon (nc-Si:H) thin-film solar cells were prepared on flexible stainless steel substrates using plasma-enhanced chemical vapor deposition. To enhance the performance of solar cells, material properties of back reflectors, n-doped seed layers and wide bandgap nc-SiC:H window layers were optimized. The light scattering efficiency of Ag back reflectors was improved by increasing the surface roughness of the films deposited at elevated substrate temperatures. Using the n-doped seed layers with high crystallinity, the initial crystal growth of intrinsic nc-Si:H absorber layers was improved, resulting in the elimination of the defect-dense amorphous regions at the n/i interfaces. The nc-SiC:H window layers with high bandgap over 2.2 eV were deposited under high hydrogen dilution conditions. The vertical current flow of the films was enhanced by the formation of Si nanocrystallites in the amorphous SiC:H matrix. Under optimized conditions, a high conversion efficiency of 9.13% ($V_{oc}=0.52$, $J_{sc}=25.45mA/cm^2$, FF = 0.69) was achieved for the flexible nc-Si:H thin-film solar cells.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2003년도 추계학술발표강연 및 논문개요집
• /
• pp.136-136
• /
• 2003

In fiber optic networks, system size and cost can be significantly reduced by development of optical components through planar optical waveguides. One important step to realize the compact optical devices is to develop planar optical amplifier to compensate the losses in splitter or other components. Planar amplifier provides optical gain in devices less than tens of centimeters long, as opposed to fiber amplifiers with lengths of typically tens of meters. To achieve the same amount of gain between the planar and fiber optical amplifier, much higher Er doping levels responsible for the gain than in the fiber amplifier are required due to the reduced path length. These doping must be done without the loss of homogeniety to minimize Er ion-ion interactions which reduce gain by co-operative upconversion. Sol-gel process has become a feasible method to allow the incorporation of Er ion concentrations higher than conventional glass melting methods. In this work, Er-doped $SiO_2$-A1$_2$ $O_3$ films were prepared by two different method via sol -Eel process. Tetraethylorthosilicate(TEOS)/aluminum secondary butoxide [Al (OC$_4$ $H_{9}$)$_3$], methacryloxypropylcnethoxysaane(MPTS)/aluminum secondary butofde [Al(OC$_4$ $H_{9}$)$_3$] systems were used as starting materials for hosting Er ions. Er-doped $SiO_2$-A1$_2$ $O_3$ films obtahed after heat-treating, coatings on Si substrate were characterized by X-ray din action, FT-IR, and N-IR fluorescence spectroscopy. The luminescence properties for two different processing procedure will be compared and discussed from peak intensity and life time.

• 한국재료학회지
• /
• 제17권1호
• /
• pp.18-24
• /
• 2007

Mullite-PSZ composite was prepared by sol-gel method using $Al(sec-OC_4H_9)_3,\;Si(OC_2H_5)_4,\;ZrOCl_2\;8H_2O\;and\;Y_2O_3$. The sinterability ana mechanical properties of powder compacts sintered at $1,650^{\circ}C$ for 4 hrs were investigated for various PSZ contents. In result Al-Si spinel formed at $980^{\circ}C$ from amorphous dried gel, and zirconia as well as mullite crystal formed above $1,200^{\circ}C$. The sintered body was densified to $97{\sim}98%$ except the specimen containing 25vol% PSZ which showed the relative density of about 95% obtained by sintering at $1,650^{\circ}C$ for 4 h. The flexural strength of the sintered body was a maximum value of 290 MPa in 20 vol% PSZ, which was also considerably larger than the value of 200 MPa without PSZ. The value of the fracture toughness increased linearly with increase of PSZ content and showed a maximum value of $4.3MPam^{1/2}$ in 25 vol% PSZ, Namely this value was remarkably larger than the $value(2.6MPam^{1/2})$ of pure mullite without PSZ.

• 한국재료학회지
• /
• 제24권1호
• /
• pp.48-52
• /
• 2014

The Mg-enriched magnesium aluminum silicate (MAS) glass is known for its higher mechanical strength and chemical resistance. Among such glasses, cordierite ($Mg_2Al_4Si_5O_{18}$) is well known to have a low thermal expansion and low melting point. Polycrystalline engineering ceramics such as alumina can be strengthened by a surface modification with low thermal expansion materials. The present study involves the synthesis of cordierite by a sol-gel process and investigates the effect of glass penetration on the surface of alumina. The cordierite powders were prepared from $Al(OC_3H_7)_3$, $Mg(OC_2H_5)_2$ and tetraethyl orthosilicate by hydrolysis and condensation reaction. The cordierite powders were characterized by X-ray diffraction (XRD, Rigaku), scanning electron microscope (SEM, JEOL: JSM-5610), energy dispersive spectroscopy (EDS, JEOL: JSM-5610), and universal testing machine (UTM, INSTRON). The X-ray diffraction patterns showed that the synthesized particles were ${\mu}$-cordierite calcined at $1100^{\circ}C$ for 1 h. The shape of synthesized cordierite was changed from ${\mu}$-cordierite to ${\alpha}$-cordierite with increasing calcination temperature. Synthesized cordierite was used for surface modification of alumina. Cordierite powders penetrated deeply into the alumina sample along grain boundaries with increasing temperature. The results of surface modification tests showed that the strength of the prepared alumina sample increased after surface modification. The strength of a surface modified with synthesized cordierite increased the most, to about 134.6MPa.

• BMB Reports
• /
• 제44권11호
• /
• pp.735-740
• /
• 2011

Tunicamycin, an endoplasmic reticulum (ER) stress inducer, specifically inhibits N-glycosylation. The cyclic AMP (cAMP) response element-binding protein H (CREBH) was previously shown to be regulated by UPR-dependent proteolytic cleavage in the liver. On the other hand, the role of CREBH in other tissues is unknown. In the present study, tunicamycin increased the level of CREBH activation (cleavage) as well as mRNA expression in osteoblast cells. Adenoviral (Ad) overexpression of CREBH suppressed BMP2-induced expression of alkaline phosphatase (ALP) and osteocalcin (OC). Interestingly, the BMP2-induced OASIS (structurally similar to CREBH, a positive regulator of osteoblast differentiation) expression was also inhibited by CREBH overexpression. In addition, inhibition of CREBH expression using siRNA reversed the tunicamycin-suppressed ALP and OC expression. These results suggest that CREBH inhibited osteoblast differentiation via suppressing BMP2-induced ALP, OC and OASIS expression in mouse calvarial derived osteoblasts.

• 한국전기전자재료학회논문지
• /
• 제24권9호
• /
• pp.766-772
• /
• 2011

Amorphous Si (a-Si) thin films of $p^+/p^-/n^+$ were deposited on $Si_3N_4$/glass substrate by using a plasma enhanced chemical vapor deposition (PECVD) method. These films were annealed at various temperatures and for various times by using a rapid thermal process (RTP) equipment. This step was added before the main thermal treatment to make the nuclei in the a-Si thin film for reducing the process time of the crystallization. The main heat treatment for the crystallization was performed at the same condition of $600^{\circ}C$/18 h in conventional furnace. The open-circuit voltages ($V_{oc}$) were remained about 450 mV up to the nucleation condition of 16min in the nucleation RTP temperature of $680^{\circ}C$. It meat that the process time for the crystallization step could be reduced by adding the nucleation step without decreasing the electrical property of the thin film Si for the solar cell application.

• Bulletin of the Korean Chemical Society
• /
• 제22권7호
• /
• pp.678-684
• /
• 2001

Porous silica-pillared montmorillonites were prepared by simultaneous intercalation of dodecylamine-TEOS [tetraethylorthosilicate, Si(OC2H5)4] into the H-montmorillonite and intragallery amine-catalyzed hydrolysis of TEOS. Mixtures of the H-montmorillonite, dodecylamine and TEOS at molar ratios of 1 : 2 : 15-30 and 1 : 2-6 : 20 resulted to swollen and viscous gel once at room temperature, allowing intercalation compounds which dodecylamine and TEOS were simultaneously intercalated into interlayer of H-montmorillonite. The hydrolysis of the gallery TEOS was conducted in water solution for 40 min at room temperature, affording siloxane-pillared H-montmorillonite. Calcination of samples at 500 $^{\circ}C$ in air resulted in silica-pillared montmorillonite with large specific surface areas between 403 and 577 m2 /g, depending on the reaction stoichiometry. The reaction at H-montmorillonite : dodecylamine : TEOS reaction stoichiometries of 1 : 2 : 15 and 1 : 4 : 20 resulted in high specific surface areas and mesopores with a narrow pore size distribution. Result indicates that the intragallery-amine catalyze the hydrolysis of gallery-TEOS and simultaneously have a role of gallery-templated micellar assemblies.

• 한국결정성장학회지
• /
• 제32권5호
• /
• pp.183-190
• /
• 2022

다이옵사이드(CaMgSi₂O₆)는 생체활성이 높을 뿐만 아니라 우수한 기계적 성질도 보유한 물질로 알려져 있다. 본 연구에서는 지르코니아 세라믹스의 생체활성을 향상시키기 위하여 지르코니아 기판 표면에 다이옵사이드를 솔젤법으로 코팅하고 in vitro 시험을 통해 지르코니아 기판의 생체활성 증진을 고찰하였다. 코팅용 다이옵사이드 솔은 Ca(NO₃)₂·H₂O, MgCl₂·H₂O 및 Si(OC₂H₅)₄를 각각의 몰비로 에탄올에 용해한 후 가수분해시켜 제조하였다. 다이옵사이드 코팅에 의한 생체활성 증진을 고찰하기 위하여 SBF 용액 내에서 in vitro 시험을 진행하였는데, 침적초기에는 주로 코팅층 다이옵사이드 입자들의 표면용해가 관찰되었고, 새로운 하이드록시아파타이트 입자의 석출은 14일 침적시편에서 주로 관찰되었다. In vitro 시험 시 SBF(Simulated Body Fluid) 용액에 대한 다이옵사이드 코팅층의 용해와 기판 표면에 석출되는 하이드록시아파타이트 층의 양과 형태는 코팅횟수와 코팅층 두께에 의존하였다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2007년도 제33회 하계학술대회 초록집
• /
• pp.260-260
• /
• 2007