• 한국추진공학회지
• /
• 제20권1호
• /
• pp.8-13
• /
• 2016

연소충격완화부품은 폴리우레탄과 같은 완화소재를 사용하여 진동을 격리함으로써 추진기관이나 화공품 연소로 발생한 충격에 의해 로켓의 전자장비가 작동하지 않는 것을 방지하기 위해 사용한다. 연소충격완화부품의 성능은 굽힘 고유진동수와 전달률을 측정하여 판단할 수 있다. 본 연구를 통해 동일한 추진기관의 해외 연구결과를 통한 기준 모델의 실험 결과를 바탕으로 굽힘 고유진동수와 전달률에 대한 설계요구조건을 수립하였으며, 충분한 충격완화특성을 가지는 완화소재를 개발하여 새로운 로켓에 적합한 연소충격완화부품을 개발하였다. 본 연구는 완화소재 및 성능 측정 방법을 이용하여 연소충격완화부품을 개발하기 위해 사용할 수 있다.

• Journal of Biosystems Engineering
• /
• 제27권6호
• /
• pp.537-546
• /
• 2002

In this study an automatic soil hardness measuring system mountable on agricultural tractors was developed to improve the accuracy of manual soil hardness testers by a constant penetrating rate, right direction of the cone-penetrometer and the isolation of vibration from the operator. This was necessary to supply similar experimental condition for performance test of new model and comparative experiment. The results of the study are summaried as follows; 1. The system consisted of a sensing part of soil hardness, a driving part of the measuring system and an attaching part between the tractor and the measuring system. 2. The allowable limit value of the system developed was set to 392N to protect from breaking the serve motor and the coupling used in this system. 3. The driving shaft penetrated into soil by 0.3m to measure soil hardness. The soil hardness was measured at the depth of 0.3m from the soil surface but the penetrating work was stopped and the driving shaft was pulled out to protect the system when the value of the soil hardness was too big on foreign substances like stones or straws. 4. Two values measured by automatic measuring system developed in this research and manual penetrometer were compared by statistics hypothesis testing method. When two people measured the soil hardness at the depth of 0.1 and 0.15m by manual cone penetrometer, there was no relationship between two values by two people but the values at the same depths by automatic measuring system developed showed similarity. The automatic system, therefore, developed in this research was proper for measuring soil hardness.

• Structural Engineering and Mechanics
• /
• 제61권3호
• /
• pp.419-426
• /
• 2017

Recently, the transportation of dangerous explosive goods is increasing, which makes vehicle blasting accidents a potential threat for the safety of bridge structures. In addition, blasting accidents happen more easily when earthquake occurs. Excessive dynamic response of bridges under extreme loads may cause local member damage, serviceability issues, or even failure of the whole structure. In this paper, a new explosion-proof and aseismic system is proposed including cable support damping bearing and steel-fiber reinforced concrete based on the existing researches. Then, considering one 40m-span simply supported concrete T-bridge as the prototype, through scale model test and numerical simulation, the dynamic response of the bridge under three conditions including only earthquake, only blast load and the combination of the two extreme loads is obtained and the applicability of this explosion-proof and aseismic system is explored. Results of the study show that this explosion-proof and aseismic system has good adaptability to seism and blast load at different level. The reducing vibration isolation efficiency of cable support damping bearing is pretty high. Increasing cables does not affect the good shock-absorption performance of the original bearing. The new system is good at shock absorption and displacement limitation. It works well in reducing the vertical dynamic response of beam body, and could limit the relative displacement between main girder and capping beam in different orientation so as to solve the problem of beam falling. The study also shows that the enhancement of steel fibers in concrete could significantly improve the blast resistance of main beam. Results of this paper can be used in the process of antiknock design, and provide strong theoretical basis for comprehensive protection and support of girder bridges.