• Geophysics and Geophysical Exploration
• /
• v.12 no.1
• /
• pp.105-113
• /
• 2009

The interpretation of observed waveform characteristics identified in refraction and wide-angle reflection data increases confidence in the crustal structure model obtained. When calculating traveltimes and raypaths, wavefront methods on a regular grid based on graph theory are robust even with complicated structures, but basically compute only first arrivals. In this paper, we develop new algorithms to compute traveltimes and raypaths not only for first arrivals, but also for fast and later reflection arrivals, later refraction arrivals, and converted waves between P and S, using the modified wavefront method based on slowness network nodes mapped on a multi-layer model. Using the new algorithm, we can interpret reflected arrivals, Pg-later arrivals, strong arrivals appearing behind Pn, triplicated Moho reflected arrivals (PmP) to obtain the shape of the Moho, and phases involving conversion between P and S. Using two models of an ocean-continent transition zone and an oceanic ridge or seamount, we show the usefulness of this algorithm, which is confirmed by synthetic seismograms using the 2D Finite Difference Method (2D-FDM). Characteristics of arrivals and raypaths of the two models differ from each other in that using only first-arrival traveltime data for crustal structure analysis involves risk of erroneous interpretation in the ocean-continent transition zone, or the region around a ridge or seamount.

• Journal of the Korean Geotechnical Society
• /
• v.32 no.7
• /
• pp.35-45
• /
• 2016

Estimation of vertical bearing capacity is critical in the design of bucket foundation used to support offshore structure. Empirical formula and closed form solutions for bucket foundations in uniform sand or clay profiles have been extensively studied. However, the vertical bearing capacity of bucket foundations in alternating layers of sand overlying clay is not well defined. We performed a series of two-dimensional axisymmetric finite element analyses on bucket foundations in sand overlying clay soil, using elasto-plastic soil model. The load transfer mechanism is investigated for various conditions. Performing the parametric study for the friction angles, undrained shear strengths, thickness of sand layer, and aspect ratios of foundation, we present the predictive charts for determining the vertical bearing capacities of bucket foundations in sand overlying clay layer. In addition, after comparing with the finite element analysis results, it is found that linear interpolation between the design charts give acceptable values in these ranges of parameters.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.14 no.3
• /
• pp.33-45
• /
• 1987

The Seonjeong royal tomb is one of many historic sites in and around Seoul city and its natural environment and landscape have born damaged seriously by heavy use. So conservation planning with an estimation of reasonable carrying capacity shall be required In aspect of not only historic site conservation, but also urban forest and nature park management. Eight sites were sampled with clumped sampling method during July of 1986 and five quadrats were examined in each site. Environmental factors, actual vegetation, and environmental impact grade were investigated in field and vegetational structure was analyzed by estimation of importance value, species diversity, similarity index, DBH class distribution, etc. The result of this study can be summarized as follows. 1. Damage on soil and vegetation of middle and lower layer increased according to amount of users'impact. 2. Semi - natural vegetation covered 63% of the total area(22.2 ha) and its major species were Pinus densiflora, Quercus aliena, Q mongolica, Sorbus alnifolia, etc. Pinus densiflora was a dominant species in heavy impact area. 3. Environmental impact grade 3, 4 and 5 area covered 51% of the seminatural vegetation, Especially, the area of impact grade 4 and 5 should be restored because self-refair seemed to be impossible. 4. The semi-natural vegetation was classified with four plant communities; two P.densiflora comm., Q. mongolica-P. densiflora comm. and Q. aliena comm. One of the P. densifolra comm. was destroyed seriously with no younger trees in middle and lower layer by overuse impact and would be bareland soon. But Q. aliena comm.in light impact area showed just completion of plant succession from P. densiflora comm.

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.36D no.6
• /
• pp.61-70
• /
• 1999

An optical switch composed of three-identical, equally-spaced $Ti:LinbO_3$ waveguides and overlaid Al electrodes of CPW structure was designed and fabricated. Patterned Ti was diffused into z-cut $LinbO_3$ substrates at $1025^{\circ}C$ for 6 hours to make a three-waveguide directional coupler. $SiO_2$ buffer layer of $1.2{\mu}m$ was grown by the PECVD to reduce the propagation loss of TM mode, and Al electrodes were built on the layer for switching the guided beam. For an incident beam of ${\lambda}=1.3{\mu}m$, almost perfect optical coupling between two outer waveguides was observed. When an electric field was applied to detune the three waveguides anti-symmetrically, the optical switching phenomenon was successfully confirmed.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.02a
• /
• pp.59-59
• /
• 2011

We will report atomically sharp epitaxial growth of $Bi_2Se_3$ three-dimensional topological insulator films on Si(111) substrate with molecular beam epitaxy (MBE). It was achieved by employing two step growth temperatures to prevent any formation of second phase, like as $SiSe_2$ clusters, between $Bi_2Se_3$ and Si substrate at the early stage of growth. The growth rate was determined completely by Bi flux and the Bi:Se flux ratio was kept ~1:15. The second-phase-free atomically sharp interface was verified by RHEED, TEM and XRD. Based on the RHEED analysis, the lattice constant of $Bi_2Se_3$ relaxed to its bulk value during the first quintuple layer implying the absence of strain from the substrate. Single-crystalline XRD peaks of $Bi_2Se_3$ were observed in films as thin as 4 QL. TEM shows full epitaxial structure of $Bi_2Se_3$ film down to the first quintuple layer without any second phases. This growth method was used to grow high quality epitaxial $Bi_2Se_3$ films from 3 QL to 3600 QL. The magneto-transport properties of these thin films show a robust 2D surface state which is thickness independent.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.347-348
• /
• 2013

To obtain high conversion efficiency in InGaN-based solar cells, it is critical to grow high indium (In) composed InGaN layer for increasing sun light absorption wavelength rage. At present, most InGaN-based solar cells adopt InGaN/GaN multi-quantum-well (MQW) structure for high crystalline quality of InGaN with high In composition. In this study, we fabricated and compared the performances of two types of InGaN/GaN MQW solar cells which have the 15% (SC 15) and 25% (SC 25) of In composition at quantum well layer. Although both devices showed similar dark current density and leakage current, SC 15 showed better performance under AM 1.5G illumination as shown in Fig. 1. It is interesting to note that SC 25 showed severe current density decrease as increasing voltages. As a result, it lowered short circuit current density and fill factor of the device. However, SC 15 showed steady current density and over 75 % of fill factor. To investigate these differencesmore clearly, we analyzed their photoluminescence (PL) spectra under various applied voltages as shown in Fig. 2. At the same time, photocurrent, which was generated by PL excitation, was also measured as shown in Fig. 3. Further, we investigated the relationship between piezoelectric field and performance of InGaN based solar cell varying indium composition.

• Journal of the Korean GEO-environmental Society
• /
• v.14 no.9
• /
• pp.57-65
• /
• 2013

Carbonate sands can be crushed under low confining pressure to achieve high compressibility. So particle crushing has significant influence on characteristics of strength and deformation. Trial embankment and hydrotest are conducted on Sabkha layer, consisting of carbonate sand to build tank structure. In this paper the settlement behavior was analyzed from each test. Particle crushing happened from 80 to 170kPa stress under compression test, and calcium was detected from chemical test. The test result came out Sabkha soil was very weak and easy to be crushing. About trial embankment test, particle crushing was not happen, and then extinction of pore water pressure and settlements were finished just during 2 days. On the other hand, the long-term settlement was happened in hydrotest. So the two test results did not correspond to each other. If loading stress is higher than yielding stress, instant settlement and secondary compression settlement are happened as a result of the particle crushing.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.25 no.1
• /
• pp.47-61
• /
• 1998

The purpose of this study was to compare the microleakage pattern of glass ionomer with resin restoration in microleakage pattern of primary and permanent teeth. Microscopical observation of interface between tooth structure and restoration was also performed. 80 and 8 sound molar teeth were used for the microleakage test and SEM study respectively. Data were analyzed statistically using ANOVA test and/or t-Test. The results of the present study were as follows: 1. According to the result of microleakage pattern between primary and permanent tooth, primary tooth generally showed more micro leakage than permanent tooth in all groups (p<.05). 2. In the resin-filled groups, occlusal margin was shown to have more microleakage than gingival margin(p<.05). Whereas the glass ionomer-filled groups showed no statistically significant differences between them(p>.05). 3. No statistically significant differences in microleakage could be found between two different resin groups(p>.05), while Fuji II LC group showed less microleakage than Ketac-Fil group(p>.05). 4. The various type hybrid layer was evident under SEM in resin-filled groups both in primary and permanent teeth with generally thicker layer in primary group. Among glass-ionomer group, Fuji II LC group showed more intact adhesion to tooth surface than Ketac-Fil group

• Journal of Wetlands Research
• /
• v.26 no.1
• /
• pp.51-61
• /
• 2024

This study was conducted to identify the community structure of two outstanding forest wetlands in Goheung-gun, Jeollanam-do, and to investigate their succession trends. vegetation survey was conducted using the Z-M phytosociological method From May to October, 2023, and based on this data, the Actual vegetation map was created by categorizing communities. This resulted in the classification of six communities. namely, Rhynchospora faberi community, Alnus japonica-Molinia japonica community, Ilex crenata-M. japonica community, M. japonica community, A. japonica-Pinus densiflora community and A. japonica community. The results of each layer's importance value (IV) analysis results indicated that in the R. faberi community, that of R. faberi, an obligate wetland plant, was high. In the subtree and shrub layers of the other five communities, A. japonica, a key species in wetland ecosystems, and Pinus densiflora and I. crenata, both obligate upland plants, exhibited higher IV. In the herb layer, the IV of M. japonica, a representative species of intermediate wetlands, was notably high. The results of classifying all observed plant species in the survey area based on their wetland preference revealed that in the R. faberi community, the occurrence rate of obligate wetland plants was high. However, in the other five communities, the occurrence rate of obligate upland plants was predominantly observed. Excluding the R. faberi community, in the other five communities constituting the outstanding forest wetlands, the occurrence rate of upland plants among the forest plants was high. It was observed that M. japonica which typically appears during the transition of wetlands to drier stages, was flourishing, indicating that the wetland was undergoing vegetation succession and terrestrialization.

• Journal of Korean Society of Forest Science
• /
• v.99 no.4
• /
• pp.590-596
• /
• 2010

To investigate and to compare the structure of Picea jezoensis forests at Chunwangbong area in the Jirisan National Park, 33 plots(400) were set up by a random sampling method. Dead individuals of Picea jezoensis trees were 15.6%, these were observed mainly in the upper-layer trees. A few seedlings of Picea jezoensis were found in this investigation area. This result indicates that Picea jezoensis might be gradually decreased in the future. Picea jezoensis stands were classified into two major groups by cluster analysis. There were strong positive correlations between Syringa reticulata and Acer pseudosieboldianum, Tripterygium regelii, Quercus serrata; Betula ermani and Lonicera maackii; Euonymus macropterus and Acer ukurunduense; Acer pseudosieboldianum and Tripterygium regelii, and relatively weak negative correlations were showed between Picea jezoensis and Abies koreana; Betula ermani and Acer ukurunduense; Acer pseudosieboldianum and Tripterygium regelii. Species diversity index(H') of investigated groups ranged from 1.0000 to 1.3010.