• Journal of architectural history
• /
• v.28 no.4
• /
• pp.27-36
• /
• 2019

The traditional earth wall structure consists of a Joongkit(a small reinforcing post inside a wall) and a Oe(a miscellaneous tree, rendered laths) based on the space between the columns and applying the soil. The members who act as the base layer before applying soil used joongkit, sakmok, and oemok, which are known to correspond to the current joongkit, gasisae, and lath strips. This study was designed to understand the following through an analysis of the ancient texts, such as uigwe. Through a study on the usage and specifications of joongkit recorded on the uigwe, I wanted to reveal that joongkit is a material that has different specifications, functions, and installation techniques from current joongkit. The purpose of this study was to present the differences and technical features of the components of use for two types of oeyeokki technique of traditional wall. In addition, the items to be considered at the actual cultural heritage repair site were reviewed in the restoration of the earth wall weaving technique.

• Structural Engineering and Mechanics
• /
• v.82 no.6
• /
• pp.735-745
• /
• 2022

The suspension thyristor valve can generate tremendous vertical acceleration responses in layers and large tension forces in hangers. A shaking table test of a scaled-down model of thyristor valves suspended on a hall building is performed to qualify the risk of vertical uplift of two representative types of valves, the chain valve and the rigid valve. Besides, an analytical model is established to investigate the source of the slackening of hangers. The test results show that the valves frequently experience a large vertical acceleration response. The soft spring joint can significantly reduce acceleration, but is still unable to prevent vertical uplift of the chain valve. The analytical model shows a stiffer roof and inter-story connection both contribute to a higher risk of vertical uplift for a rigid valve. In addition, the planar eccentricity and short hangers, which result in torsional motion of the valve, increase the possibility of vertical uplift for a chain valve. Therefore, spring joints with additional viscous dampers and symmetric layout in each layer are recommended for the rigid and chain valve, respectively, to prevent the uplift of valves.

• Explosives and Blasting
• /
• v.40 no.4
• /
• pp.15-26
• /
• 2022

With the recent increase in old and dangerous buildings, the demand for technology in the field of structure demolition is rapidly increasing. In particular, in the case of structures with severe deformation of damage, there is a risk of deterioration in stability and disaster due to changes in the load distribution characteristics in the structure, so rapid structure demolition technology that can be efficiently dismantled in a short period of time is drawing attention. However, structural deformation such as unauthorized extension or illegal remodeling occurs frequently in many old structures, which is not reflected in structural information such as building drawings, and acts as an obstacle in the demolition design process. In this study, as an effective way to overcome the discrepancy between the structural information of old structures and the actual structure, access to actual structures through 3D modeling was considered. 3D point cloud data inside and outside the building were obtained through LiDAR and drone photography for buildings scheduled to be blasting demolition, and precision matching between the two spatial data groups was performed using an open-source based spatial information construction system. The 3D structure model was completed by importing point cloud data matched with 3D modeling software to create structural drawings for each layer and forming each member along the structure slab, pillar, beam, and ceiling boundary. In addition, the modeling technique proposed in this study was verified by comparing it with the actual measurement value for selected structure member.

• Applied Microscopy
• /
• v.29 no.2
• /
• pp.177-187
• /
• 1999

Ultrastructure of gametes in the three-spine stickleback, Gasterosteus aculeatus aculeatus was observed, utilizing light, scanning and transmission electron microscopes. The egg of three-spine stickleback is spherical and demersal type. The eggs are highly adhesived to each other but not to substrates. There are many oil droplets in vitelline membrane. The outer surface of egg envelope is arranged by mushroom-like structures and pore canals. The egg have a micropyle, sperm entry site, in the area of the animal pole. The egg envelope consists of three layers, an outer layer with high electron density, a middle layer consisting two layers and an inner layer consisting of 16 to 20 layers. In the fertilized egg envelope, the molecular weights of these components ranged from 14 kDa to 205 kDa. The molecular weights of nam protein bands are 19.4 kDa, 36.7 KDa, 39.4 kDa, 42.9 kDa, 46.1 kDa and 53.0 kDa. The head of spermatozoa is spherical shape and the acrosome is absent. The mitochondria in midpiece are arranged from one to three layers and separated from the axoneme by the cytoplasmic canal. The tail has two lateral fins and the axoneme is of the 9+2 structure.

• Asian-Australasian Journal of Animal Sciences
• /
• v.33 no.9
• /
• pp.1411-1420
• /
• 2020

Objective: The aim of study was to investigate the effects of season and single layer centrifugation (SLC) before cryopreservation on post-thaw bull sperm quality in Thailand. Methods: Semen was collected from 6 bulls (Bos indicus) in summer, rainy season and winter 2014 through 2016. Semen characteristics, sperm morphology, sperm kinematics, viability, chromatin structure and mitochondrial membrane were evaluated. Meteorological data were available from the local meteorological station; Results: Season had an effect on semen characteristics in the raw ejaculate, with higher proportions of normal spermatozoa and lower abnormalities in winter than in the other two seasons. Sperm kinematics, viability, DNA fragmentation index, and mitochondrial membrane potential were not different between seasons. Sperm samples selected by SLC had greater normal morphology and a lower proportion with bent tails than controls and higher values of progressive motility (PRO), beat cross frequency, linearity, straightness, wobble (WOB), and lower values of slow motility, velocity average path (VAP), velocity curved line, and amplitude of lateral head displacement than controls. In addition, SLC-selection had a favorable effect on PRO, VAP, and WOB that differed among seasons. Conclusion: Our results suggested that these bulls were well adapted to their location, with season having an effect on sperm morphology. Moreover, SLC could be used prior to cryopreservation, regardless of season, to enhance normal morphology and kinematics of bull sperm samples without adversely affecting other parameters of sperm quality. However, there was considerable variation among bulls in DNA fragmentation index, mitochondrial membrane potential and sperm viability. In addition, SLC had a positive effect on sperm morphology and sperm kinematics, which could be expected to influence fertility.

• Economic and Environmental Geology
• /
• v.22 no.3
• /
• pp.207-219
• /
• 1989

Eight under 2 micron size fractions of the montmorillonite from Jugjeonri area, Gyeongsanbug-do, were studied and then this result has been compared with data from Yongdongri area. Montmorillonites occurring at the same stratigraphic horizon in each area show limited variation in chemical composition, but shows some degree of differences in exchangeable cation compositions and total layer charges of montmorillonites from Jugjeonri to Yongdongri area. In general, samples from Jugjeonri show higher amount of exchangeable Na and layer charge due to relatively higher substitution of Mg for Al in octahedral sites than those from Yongdongri area. But Their dehydroxylation endothermic peaks of the samples from both areas are abnormal type with a small range of variation of peak temperature. This variation seems to reflect tetrahedral substitution of AI for Si for samples from Yongdongri whereas samples from Jugjeonri do not show shuch a tendency. However, samples from Jugjeonri proved to be relatively higher dehydroxylation peak temperatures than those of the other. DSC data for sample from Jugjeonri also show that divalent-cation saturated montmorillonite have relatively a higher endothermic heat capacities than monovalent-cation saturated one as shown in previous work. Two different morphologies of montmorillonites, honeycomb structure and closely packed intergrowth, by SEM were observed in samples from both areas but the later one is common. The scalloped type is relatively abundant in the sample from Yongdongri than the other. The dominant habit by TEM are irregularly shaped foliated aggregates and platy shaped particles. In general, foliated aggregates which are easy to disperse are relatively abundant in the samples from Jugjeon compared with those from Yongdongri area.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.26 no.10
• /
• pp.1551-1558
• /
• 2022

We propose a two-tier cooperative computing system comprised of a mobile device and an edge server for partial offloading of multi-branch structures in Fog/Edge Computing environments in this paper. The proposed system includes an algorithm for splitting up application service processing by using reconstructive linearization techniques for multi-branch structures, as well as an optimal collaboration algorithm based on partial offloading between mobile device and edge server. Furthermore, we formulate computation offloading and CNN layer scheduling as latency minimization problems and simulate the effectiveness of the proposed system. As a result of the experiment, the proposed algorithm is suitable for both DAG and chain topology, adapts well to different network conditions, and provides efficient task processing strategies and processing time when compared to local or edge-only executions. Furthermore, the proposed system can be used to conduct research on the optimization of the model for the optimal execution of application services on mobile devices and the efficient distribution of edge resource workloads.

• Applied Microscopy
• /
• v.47 no.4
• /
• pp.238-241
• /
• 2017

A study on the visual cell and eyeball of the endemic Korean species Liobagrus mediadiposalis was investigated by light and electron microscopes. The retina of a small and 2 mm-diameter round eye was thin, $151.0{\pm}4.0{\mu}m$ and has two visual cells, a single cone and a rod cell. The single cone cells are short and thick, $18.0{\pm}0.9{\mu}m$ in length and $5.1{\pm}0.7{\mu}m$ (n=30) in diameter, while the rod cells are longer and thinner, $54.8{\pm}2.9{\mu}m$ in length and $3.3{\pm}0.6{\mu}m$ in diameter. The cone cells are seen an irregular and random mosaic pattern, and the rod cells are also randomly situated at between cone cells. As a rare phenomenon, such structure is one of characteristics reflecting the eye of a nocturnal and bottom-dwelling freshwater fish. The ultrastructure of visual cells was observed with scanning and transmission electron microscopy, both cone and rod cells are divided into an inner segment with numerous mitochondria and an outer segment with stacks of membrane discs.

• Journal of Magnetics
• /
• v.8 no.2
• /
• pp.89-92
• /
• 2003

The tunneling magnetoresistance (TMR) of a ramp-edge type junction with SrTiO$_3$barrier layer has been stud-ied. The samples with a structure of glass/NiO(600${\AA}$)/Co(100${\AA}$)/SrTiO$_3$(400 ${\AA}$)/SrTiO$_3$(20-100${\AA}$)/NiFe(100${\AA}$) were prepared by the sputtering and etched by the electron cyclotron (ECR) argon ion milling. Nonlinear I-V characteristics were obtained from a ramp-type tunneling junctions, having the dominant difference between two different external magnetic fields (${\pm}$100 Oe) perpendicular to the junction edge line. In the SrTiO$_3$ barrier thickness of 40${\AA}$, the TMR was 52.7% at a bias voltage of -50 mV The bias voltage dependence of resistance and TMR in a ramp-type tunneling junction was similar with those of the layered TMR junction.

• Applied Microscopy
• /
• v.26 no.4
• /
• pp.389-399
• /
• 1996

In order to understand the morphological differences between two different organic loadings by its upstream, and to compare with other algal groups with references, the fine structure of blue-green algae, Microcystis aeruginosa Kitzing, taken from two branches, Tongbok and Bosung stream of Lake Chuam, Korea pennisula was examined. It showed extinct differences in most physicochemical factors between both branches, except water temperature and pH values. The concentrations of total phosphorus in Tongbok branch were twice as those of Bosung. M. aeruginosa cells were enumerated totally $1.2X10^4cells/ml$ and these individuals in branch of Tongbok were close to two times as much as Bosung. In light and electron microscopy, natural M. aeruginosa colonies formed irregular shape and non-directional array in amorphous matrix. They were consisted of many kinds of cells, youngs or olds in cell division, solitary, and various size of cells. Each cell ranged from 2.61 to $5.40{\mu}m$ in diameter, and averaged as $3.54{\pm}0.19{\mu}m$. In cytoplasm, they contained a number of inclusions in various size, shape and appearances. Among them, polyhedral bodies or carboxysomes, a structured granules, photosynthetic lamellae or thylakoids, and gas vacuoles were prominent and easy to recognize. Although it was failed to find the definable morphological variations in the ultrastructure of M. aeruginosa in terms of algal habitual environments, some useful characters were founded, outer layer of cell wall, polyhedral bodies and gas vacuoles, in blue-green algal classification and taxonomy.