• ALGAE
• /
• v.21 no.1
• /
• pp.83-90
• /
• 2006

Phytoplankton community in the coastal waters off the northeastern Korean Peninsula were characterized from May 2002 to August 2003. Taxonomic composition, abundance and biomass were determined at two water depths at 10 sample sites. A total of 153 phytoplankton species including 121 diatoms, 28 dinoflagellates, 7 green algae and 7 other species were identified. The mean abundance of phytoplankton varied from 15 to 430 cells mL–1 in the surface layer and from 11 to 545 cells mL–1 in the bottom layer, respectively. Phytoplankton was more abundant in coastal stations relative to those in more open ocean. The most dominant species were marine diatoms such as Thalassionema nitzschioides, Licmorphora abbreviata, Chaetoceros affinis and Chaetoceros socialis. In addition, a few limnotic diatoms including Fragilaria capucina v. rumpens, the green alga Scenedesmus dimorphus, some marine dinoflagellates and Cryptomonas sp. appeared as dominant species. Mean concentration of total chlorophyll-a varied from 0.22 to 7.87 μg chl-a L–1 and from 0.45 to 6.79 μg chl-a L–1 in the surface and bottom layers, respectively. The contribution of phytoplankton each size-fractionated varied highly with season. The contribution of microphytoplankton to total biomass of phytoplankton in the surface and bottom layer was high in February and August 2003, and that of nano-phytoplankton was high in May 2002 in both surface and bottom layers.

• Journal of Electrical Engineering and Technology
• /
• v.10 no.1
• /
• pp.331-337
• /
• 2015

A novel fully-printed microstrip antenna with negative first resonance and dual polarization is proposed. The radiator is printed on the 1-layer substrate instead of multilayers. The -1st resonance results from a composite right- and left-handed(CRLH) structure that has a circumferentially interlocked gap capacitively coupling a patch with a shorted-ring. This compact antenna is provided with a dual-polarization capability by creating two orthogonal linear polarizations in one body with coaxial feeds. The design is carried out by doing full-wave EM field simulation which is compared with the measurement of the fabricated antenna prototype. The measured results give the gain of 5 dBi and the efficiency of 78% at the -1st resonance mode as the center frequency of a downlink channel of the bandwidth over 20 MHz with 29 dB polarization isolation for mobile communication.

• Current Optics and Photonics
• /
• v.5 no.1
• /
• pp.23-31
• /
• 2021

We propose a wheel screen type Lamina 3D display, which realizes a 3D image that can satisfy the accommodation cue by projecting volumetric images encoded by varying polarization states to a multilayered screen. The proposed system is composed of two parts: an encoding part that converts depth information to states of polarization and a decoding part that projects depth images to the corresponded diffusing layer. Though the basic principle of Lamina displays has already been verified by previous studies, those schemes suffered from a bottleneck of inferior resolution of the 3D image due to the blurring on the surfaces of diffusing layers in the stacked volume. In this paper, we propose a new structure to implement the decoding part by adopting a form of the wheel screen. Experimental verification is also provided to support the proposed principle.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.15 no.1
• /
• pp.229-240
• /
• 1991

The large camber angle theory of turbomachine blade of compressor has been developed recently for the two-dimensional flow by Hawthorn, et al. However, in the above theory it was assumed that the fluid was incompressible and inviscid, and the blades had no thickness. In this study, the flow in a blade cascade being mounted in parallel fashion with blade of arbitrary thickness is studied in order to determine the effects of the camber angle on the performance characteristic of the blade section under the consideration of compressibility and viscosity of fluid. The panel method is used for potential flow analysis. The flow in the boundary-layer is obtained by solving the integral boundary-layer structure through the laminar, transitional , and turbulent flow using the pressure field determined from the potential flow. And then the viscous-inviscid interaction scheme is used for interaction of these two flows. For the determination of the variation in the outlet fluid angle influenced by deviation in cascade flow, the superposition method which is used for single foil is introduced in this analysis. By the introduction of this method, the effects of the deviation on outlet fluid angle and the resulting fluid angle are made to adjust for oneself through the calculation. As the result of this study, the blade of large camber angle, large incidence angle, large pitch-chord ratio has large viscous and compressible effect than those of small camber angle. Lift force increase as camber angle increases, but above 60.deg. of camber angle, lift force decrease as camber angle increases. But drag force increases linearly with camber angle increases in the entire region.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.13 no.1
• /
• pp.97-103
• /
• 1993

This paper presents a quasi-analytical method using integral equations to obtain head distributions in unsaturated porous media with different hydrogeologic properties. One-dimensional soultion algorithms were developed for two cases of boundary conditions at the top: 1) constant head and 2) constant flux. Water table elevation at the bottom was assumed known for both cases. The methodology was applied to a fly ash disposal facility in an alluvium area. The results showed that the pressure head distributions had high nonlinearity with large gradients slightly above the interface of two media which made preliminary numerical solutions implausible. The developed method helped to structure finite element grids for improving convergence and accuracy.

• Bulletin of the Korean Chemical Society
• /
• v.32 no.5
• /
• pp.1692-1696
• /
• 2011

The reactions of 1H-1,2,4-triazole (Htr) with $MX_2$ ($ZnCl_2$ for 1; $CdBr_2$ for 2) resulted in two coordination polymers, [Zn(tr)Cl]$_n$ (1) and $[Cd(Htr)_2Br_2]_n$ (2). The structural analyses indicate that 1 and 2 feature a 2D layer and 1D triple chain, respectively. In 1, neighouring Zn atoms are connected by ${\mu}_3-1$ ${\kappa}N$: 2 ${\kappa}N$: $4{\kappa}N-tr^-$ anionic ligand into 6- and 16-membered rings, further grow into a 2D sheet. Cd atoms in 2 are bonded by two ${\mu}_2-Br^-$ bridges and neutral ${\mu}_2$-1 ${\kappa}N$: 2 ${\kappa}N$-Htr to form a 1D triple chain. The fluorescent characterizations of 1, 2 and the free Htr ligand feature simlilar emission peakes at 444, 446 and 423 nm respectively, which can be assigned to intra-ligand ${\pi}-{\pi}^*$ transition of (H)tr. The energy gaps of 5.90 eV for 1, 5.16 eV for 2, and 5.93 eV for Htr suggest that the compounds behave as insulators.

• Proceedings of the IEEK Conference
• /
• 1999.11a
• /
• pp.295-298
• /
• 1999

AlGaAs/InGaAs power P-HEMTS (Pseudo-morphic High Electron Mobility Transistors) with 1.0-${\mu}{\textrm}{m}$ gate length for PCS applications have been fabricated. We adopted single heterojunction P-HEMT structure with two Si-delta doped layer to obtain higher current density. It exhibits a maximum current density of 512㎃/mm, an extrinsic transconductance of 259mS/mm, and a gate to drain breakdown voltage of 12.0V, respectively. The device exhibits a power density of 657㎽/mm, a maximum power added efficiency of 42.1%, a linear power gain of 9.85㏈ respectively at a drain bias of 6.0V, gate bias of 0.6V and an operation frequency of 1.765㎓.

• Bulletin of the Korean Chemical Society
• /
• v.35 no.1
• /
• pp.45-50
• /
• 2014

A fully packed capillary electrochromatographic (CEC) microchip with an on-column micro-solid phase extraction (SPE) bed for the preconcentration and separation of organic analytes was prepared. A linear microchannel with monodisperse colloidal silica packing was formed on a cyclic olefinic copolymer microchip with two reservoirs on both ends. Silver-cemented silica packing frit structure was formed at the entrance of the microchannel by electroless plating treatment as a base layer. A gold coating was formed on it by reducing $Au^{3+}$ to gold with hydroxylamine. Finally micro-SPE bed was formed by self-assembly adsorption of 1-dodecanethiol on it. Micro-SPE beds were about 100-150 ${\mu}m$ long. Approximately $10^3$ fold sensitivity enhancements for Sulforhodamine B, and Fluorescein in nM concentration levels were possible with 80 s preconcentration. Basic extraction characteristics were studied.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.31A no.6
• /
• pp.61-69
• /
• 1994

For distortion-invariant recognition of Korean characters, a holographic implementation of an optical associative memory system is proposed. The structure of the proposed system is a single-layer neural network employing interconneclion matrix, thresholding and feedback. To provide the interconnection matrix, we use two CGII's which are placed on intermcdiate plane of cascaded Vander Lugt corrclators to form an optical memory loop. The holographic correlator stores reference images in a hologram and retrives them in a coherently illuminated feedback loop. An input image which maybe noisy or incomplete, is applicd to the system and simultaneously correlated optically with all of the stord images. These correlations are throsholed and fed back to the input, where the strongest correlation reinforces the input image. The enhanced image passes arround the loop repeatedly, approaching the stored image more closely on each pass until the system stabilizes on the desired image. The computer simulation results show that the proposed Korean Character recognition algorithm has high discrimination capability and noise immunity.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.30B no.11
• /
• pp.56-65
• /
• 1993

This paper presents the design consideration of the MFNNs(Multilayer Feed forward Neural Networks) based on the distribution of the given teching patterns. By extracting the feature points from the given teaching patterns, the structure of a network including the netowrk size and interconnection weights of a network is initialized. This network is trained based on the modified version of the EBP(Error Back Propagation) algorithm. As a result, the proposed method has the advantage of learning speed compared to the conventional learning of the MFNNs with randomly chosen initial weights. To show the effectiveness of the suggested approach, the simulation result on the approximation of a two demensional continuous function is shown.