• Progress in Superconductivity and Cryogenics
• /
• v.8 no.3
• /
• pp.27-31
• /
• 2006

We propose a replication method to solve the problem of large percent failure in texturing processes of coated conductors. This problem is due to the individual texturing process for each coated conductor that is very long tape having no single defect spot. We tested two different methods of replication process that are based on a well-textured Ni template. First method has structure of Ni/BaO/STO/$CeO_2$/SmBCO/Ag. So BaO layer is dissolved in water that we can separate STO/$CeO_2$/SmBCO/Ag layers. In this processing, the property of STO is conserved but the superconductivity of SmBCO is deteriorated. So we can consider another method. Second method has structure of template(STO)/BaO/STO/Pt/STO. After dissolving BaO then we deposited YBCO. The result of these experiments showed the feasibility of replication.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2005.07a
• /
• pp.558-561
• /
• 2005

In-situ photopolymerization of alkyl acrylate monomers in the presence of a nematic fluid provides a cellular matrix of liquid crystalline droplets in which the chemical structure of the encapsulating polymer exerts control over the alignment (anchoring) of the liquid crystalline molecules. Control is obtained by variation of the alkyl side chains and through copolymerization of two dissimilar monofunctional acrylates. Two monofunctional acrylates with opposing tendencies on copolymerization provide control over the tunability of anchoring over a wide temperature range. Using various acrylates we show that a uniform vertical alignment can be achieved over a large area. Utilizing this technique and a nematic with negative dielectric anisotropy, we have fabricated highly flexible liquid crytal based devices, with high contrast and fast response time, without using any alignment layer.

• The KIPS Transactions:PartC
• /
• v.8C no.1
• /
• pp.97-104
• /
• 2001

In this paper, we present a new hierarchical model for performance analysis of channel allocation and packet service protocol in wireless n network. The proposed hierarchical model consists of two parts : upper and lower layer models. The upper layer model is the structure state model representing the state of the channel allocation and call service. The lower layer model, which captures the performance of the system within a given structure state, is the wireless packet retransmission protocol model. These models are developed using SRN which is an modeling tool. SRN, an extension of stochastic Petri net, provides compact modeling facilities for system analysis. To get the performance index, appropriate reward rates are assigned to its SRN. Fixed point iteration is used to determine the model parameters that are not available directly as input. That is, the call service time of the upper model can be obtained by packet delay in the lower model, and the packet generation rates of the lower model come from call generation rates of the upper model.

• Molecules and Cells
• /
• v.21 no.1
• /
• pp.129-134
• /
• 2006

Lon, also known as protease La, belongs to a class of ATP-dependent serine protease. It plays an essential role in degradation of abnormal proteins and of certain short-lived regulatory proteins, and is thought to possess a Ser-Lys catalytic dyad. To examine the structural organization of Lon, we performed an electron microscope analysis. The averaged images of Lon with end-on orientation revealed a six-membered, ring-shaped structure with a central cavity. The side-on view showed a two-layered structure with an equal distribution of mass across the equatorial plane of the complex. Since a Lon subunit possesses two large regions containing nucleotide binding and proteolytic domains, each layer of the Lon hexamer appears to consist of the side projections of one of the major domains arranged in a ring. Lon showed a strong tendency to form hexamers in the presence of $Mg^{2+}$, but dissociated into monomers and/or dimers in its absence. Moreover, $Mg^{2+}$-dependent hexamer formation was independent of ATP. These results indicate that Lon has a hexameric ring-shaped structure with a central cavity, and that the establishment of this configuration requires $Mg^{2+}$, but not ATP.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2006.05a
• /
• pp.295-299
• /
• 2006

The inner-structure bonded(ISB) sheet metal is defined as a composite sheet metal which has middle layer of truss-structure between two skin sheets. The characteristics such as ultra-light weight, high rigidity, high strength, etc are required especially for automobile parts. The characteristic of ISB sheet metal depends on inner-structure pattern or method of bonding. Pyramid type of crimped expanded metal is used for inner-structure and both of resistance welding and adhesive bonding are applied to make a specimen. As a result of compression test, it is appeared that forming limit is 10% reduction in thickness under a load of 8kgf per unit element(one inner-structure). In case of uniaxial tensile test the non-uniform surface integrity rather than the buckling of inner-structure happened at a load of 450kgf, which indicates elongation of 7.2% and thickness reduction of 13%. The eye-inspection method was applied to examine the defects occurring on the specimen during stretch forming. In case of biaxial stretch forming only the non-uniform deformation on the surface of a skin sheet could be observed. The forming limit in stretching of ISB sheet metal with the hemi-spherical punch of 150mm in diameter was 3mm in forming depth and 5% reduction in thickness.

• Korean Journal of Ichthyology
• /
• v.17 no.3
• /
• pp.167-172
• /
• 2005

The flat-headed goby, Luciogobius guttatus, inhabits tidepools and river mouths, and stays under stones on the dried bottom for the duration of the low tide. To know the relationship of its respiration and habit in this fish, the epidermis of five appendages was observed. The epidermis has three layers: the outermost layer, middle layer and stratum germinativum. The outermost layer is composed of polygonal cells or rather flattened cells, and mucous cells. The unicellular mucous cells showing acid mucopolysaccharides are 11.1 to $16.1{\mu}m$ in mean height and in one or two rows. The middle layer consists mainly of large epidermal cells that are swollen by adjacent epidermal cells and arranged in a web-shaped structure. The swollen cells are 12.3 to $15.2{\mu}m$ in mean height and arranged in one to 11 layers. Since the swollen cells occupy the entire height of the epidermis, the epidermis is thick. A large number of blood capillaries are present just below the stratum germinativum. Taste buds are distributed at intervals on the surface of the epidermis. Based on these epidermal strucures, it is likely that L. guttatus utilizes cutaneous respiration in a dual respiratory systems.

• 유체기계공업학회:학술대회논문집
• /
• 2006.08a
• /
• pp.401-402
• /
• 2006

The turbulent flow around a sphere was investigated using two experimental techniques: smoke-wire flow visualization in wind tunnel at Re=5300, 11000 and PIV measurements in a circulating water channel. The smoke-wire visualization shows flow separation points near an azimuthal angle of $90^{\circ}$, recirculating flow, transition from laminar to turbulent shear layer, evolving vortex roll-up and fully turbulent eddies in the sphere wake. The mean velocity field measured using a PIV technique in x-y center plane demonstrates the detailed near-wake structure such as nearly symmetric recirculation region, two toroidal vortices, laminar separation, transition and turbulent eddies. The PIV measurements of turbulent wake in y-z planes show that a recirculating vortex pair dominates the near-wake region.

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.35D no.4
• /
• pp.84-92
• /
• 1998

A program was developed to analyze the electrical characteristics and harmonic distrotion in a two-dimensional silicon BJT. The finite difference equations of the small signal and its second and thired harmonics for basic semiconductor equations are formulated treating the nonlinearity and time dependence with Volterra series and Taylor series. The soluations for three sets of simultaneous equations were obtained sequantially by a decoupled iteration method and each set was solved by a modified Stone's algorithm. Distortion magins and ac parameters such as input impedance and current gains are calculated with frequency and load resistance as parameters. The distortion margin vs. load resistancecurves show cancellation minima when the pahse of output voltage shifts. It is shown that the distortionof small signal characteristics can be reduced by reducing the base width, increasing the emitter stripe length and reducing the collector epitaxial layer doping concentration in the silicon BJT structure. The simulation program called TRADAP can be used for the design and optimization of transistors and circuits as well as for the calculation of small signal and distortion solutions.

• Korean Journal of Materials Research
• /
• v.29 no.6
• /
• pp.392-397
• /
• 2019

A cold roll-bonding process is applied to fabricate an AA6061/AA5052/AA6061 three-layer clad sheet. Two AA6061 and one AA5052 sheets of 2 mm thickness, 40 mm width, and 300 mm length are stacked, with the AA5052 sheet located in the center. After surface treatment such as degreasing and wire brushing, sample is reduced to a thickness of 1.5 mm by multi-pass cold rolling. The rolling is performed at ambient temperature without lubricant using a 2-high mill with a roll diameter of 400 mm at rolling speed of 6.0 m/sec. The roll bonded AA6061/AA5052/AA6061 complex sheet is then hardened by natural aging(T4) and artificial aging(T6) treatments. The microstructures of the as-roll bonded and age-hardened Al complex sheets are revealed by optical microscopy; the mechanical properties are investigated by tensile testing and hardness testing. After rolling, the roll-bonded AA6061/AA5052/AA6061 sheets show a typical deformation structure in which grains are elongated in the rolling direction. However, after T4 and T6 aging treatment, there is a recrystallization structure consisting of coarse equiaxed grains in both AA5052 and AA6061 sheets. The as roll-bonded specimen shows a sandwich structure in which an AA5052 sheet is inserted into two AA6061 sheets with higher hardness. However, after T4 and T6 aging treatment, there is a different sandwich structure in which the hardness of the upper and lower layers of the AA6061 sheets is higher than that of the center of the AA5052 sheet. The strength values of the T4 and T6 age-treated specimens are found to increase by 1.3 and 1.4 times, respectively, compared to that value of the starting material.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.15 no.4
• /
• pp.81-95
• /
• 2012

This study was intended for Fagus engleriana stand in Is. Ulleung where the disturbance of vegetation has been caused by the exploitation and the increase of tourists. For the effective conservation and management on this issue, this study was conducted provide basic data. The sixteen study sites ($20{\times}20m$) were installed in the dominant Fagus engleriana stand and the base environment and vegetation were investigated. The Fagus engleriana stand was classified into two groups, The Fagus engleriana stand was classified into two groups, community A is Fagus engleriana-Sorbus amurensis and community B is Fagus engleriana-Acer pictum subsp. Mono by cluster analysis and community A were nothing signigicant by indicator species analysis. Community B were Eight species (Tsuga sieboldii, Camellia japonica, Dystaenia takesimana ect.) significant by indicator species analysis. The diameter class of 16cm to 25cm was 53.7% in population structure of Fagus engleriana, which was the highest and showed inverse J-distribution. Species diversity index (H') of investigated woody layer group ranged from 0.99 to 2.05 and that of under layer group ranged from 1.75~2.59. According to Non-metric Multidimensional Scaling (NMS) analysis, the woody layer was divided into community A developed in the region having relatively high sand content at high altitudes and community B formed at the place having relatively high clay content at low altitudes. Then this classification was significant through Multi-Response Permutation Procedures (MRPP) analysis. The distribution of understory vegetation through Detrended Correspondence Analysis (DCA) was induced by the silt content and cover degree of vegetation layer.