• Journal of the Korea institute for structural maintenance and inspection
• /
• v.15 no.2
• /
• pp.61-69
• /
• 2011

Fiber Reinforced Plastic (FRP) sheets have been widely used to retrofit and rehabilitate RC structures, while in case of retrofitting steel structures, there are no codes and researches. It stems from configuration of member and characteristics of bonding behavior. This study focused on the static behavior of steel beams reinforcement by AFRP sheets. The main objective of the experimental programme was the evaluation of the force transfer mechanism, the increment of the beam load carrying capacity and the bending stiffness. A bending test was conducted on a H-shaped steel beam, with aramid FRP sheets bonded to its flanges. The mid-span deflection and the strain from three points along AFRP sheets were recorded Test results exhibit that the increment of the load-carrying capacity with reference to a mid-span deflection level of 15 mm(1/125mm of the clear span) was equal to 9.4% and for the two layers case, an elastic stiffness increment is slightly higher than one layer case.

• Korean Journal of Environment and Ecology
• /
• v.30 no.5
• /
• pp.896-907
• /
• 2016

The habitat characteristics of Aconitum austrokoreense Koidz. were investigated to provide basic data for conservation and restoration. The altitude ranged from 260m to 728m with inclinations of $4-39^{\circ}$. As a result of vegetation survey within natural populations, a total of 147 taxa were identified inside 20 quadrates in 7 natural habitats. The importance value of Aconitum austrokoreense was 23.0% based on the coverage and frequency of the herbaceous layer and sat is more dominant. Species diversity was 1.23, and dominace and evenness were found to be 0.22 and 0.77, respectively. The soil type were silty loam (four sites), sandy loam (two sites) and loam (one site). The average field organic matter was 7.83% and the total nitrogen and pH were 0.35, and 5.69. Correlation analysis between environmental factors and population characteristic showed the correlations between chlorophyll content and slope, flowering rate and soil humidity. Conservation on habitats conditions is important for stable maintenance the flora and the surrounding area including habitats has to be designated a protection area for habitats conservation.

• Journal of Korean Society of Forest Science
• /
• v.90 no.6
• /
• pp.673-682
• /
• 2001

The objective of this study was to monitor vegetation development process after timber harvesting at (Mt.) Baekwoonsan Seoul National University Forests, Korea. Two monitoring plots were established in 1994 and woody plant were monitored from 1994 to 1999. Vegetation development pattern during last six years(1994-1999) after timber harvesting were as follows; Styrax obassia, Styrax japonica and Lindera erythrocarpa as of the existing tree were competitive species in the first year after clearcut, and Styrax japonica and Lindera erythrocarpa as of sprout tree) and Aralia elata as of seedling were dominant species in the sixth years after clearcut. Species diversity indices of harvested forest interior was decreased at the southwestern slope and increased at the northeastern slope. According to DBH distribution pattern, No. of individuals of Lindera erythrocarpa and Aralia elata showed vigorous growth in the sub-canopy layer and then Styrax japonica, Quercus serrata, Maackia amurensis, Lespedeza maximowixzii, Lindera obtusiloba, Staphylea bumalda, Clero-dendrum trichotomum, Weigela subsessilis, in order showed good growth in the sixth year after clearcut. Lindera erythrocarpa with a reversed J-shaped curve pattern by DBH class will be increased while Aralia elata with a J-shaped curve pattern will be decreased.

• Korean Journal of Environment and Ecology
• /
• v.23 no.5
• /
• pp.431-438
• /
• 2009

The main purpose of this research is to prepare and provide basic materials for the propagational strategy of eelgrass by investigating on the morphological adaptation of Korean Zostera marina to ocean currents. An eelgrass plant mainly consists of rhizome, leaf sheath, leaves and roots. The rhizome is the horizontal stem of the plant that serves as the backbone from which the leaves and roots emerge. The leaf sheath is the bundle at the base of the leaves that holds the leaves together, protecting the meristem, the primary growth point of the shoot. Leaves originate from a meristem which is protected by a sheath at the actively growing end of the rhizome. As the shoot grows, the rhizome elongates, moving across or within the sediment, forming roots as it progresses. The aggregated leaves from the leaf sheath are found to have two cell layers on one side and multiple layers of airy tissues called aerenchyma on the other. The aerenchyma tissues are developed in multi-layered cell structures surrounding the veins which are formed in the leaf sheath. Generative shoots are made of rhizomes, which are circular or ovoidal, stem, and spathe and spadix. The transverse section of rhizome and the stem and central floral axis is found to be circular, ovoid and in the shape of convex respectively, and the vascular bundle, which is a part of transport system, has one large tube in the center and two small tubes on both sides. The layers of collenchyma cells numbered from 12 to 15 in the stem, and from 7 to 12 in the rhizome. The seed coat is composed of sclereids, small bundles of sclerenchyma tissues, which prevent the influx of sea water from the outside and help endure the environmental stress. In conclusion, alternative multi-layer structure in circular, convex type aggregated leaf base are interpreted to morphological adaption as doing tolerable elastic structure through movement of seawater. The generative shoots develop long slim stem and branches in circular or ovoidal shapes to minimize the adverse impacts of sea current, which can be interpreted as the plant's morphological adaptation to its environment.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.5 no.3
• /
• pp.245-254
• /
• 2000

This study was conducted to investigate the community structure and distributional pattern of meiobenthos in the deep sea bottoms of northeastern Pacific during July 1998. The faunal samples were collected using the multiple corer at ten stations; eight stations along the transects from 5$^{\circ}$N to 12$^{\circ}$N, and two stations in the Preservation Zone and Impact Zone of the KODOS (Korea Deep Ocean Study) area. The organic carbon content in sediments ranged from 0.79 to 1.76 mg cm$^{-3}$, and higher concentration appeared at stations in lower latitudes than 8$^{\circ}$N. The most abundant meiobenthos was nematodes and followed by foraminiferans; these two taxa comprised more than 70% of the total abundance at all stations. The most abundant meiobenthos occurred with mesh size of 0.063 nm. The maximum density of meiobenthos was 442 ind./10 cm$^2$ at station N5, and the density gradually decreased toward station N8 where the minimum density of 92 md./10 cm$^2$ was found. More than 60% of meiobenthos were distributed at surface sediment layer within 1.0 cm, and the peak abundance was found at 0-0.25 cm layer. The latitudinal distribution pattern of meiobenthos in the study area seemed to be related with the primary productivity of the surface water that is also connected to the water circulation pattern of the Pacific Ocean near the Equator, diverging at latitude of 8$^{\circ}$N and conversing at 5$^{\circ}$N.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.5 no.4
• /
• pp.295-304
• /
• 2000

Vertical measurement of CTDT at about 30 min intervals and spatial surface temperature, salinity, and concentration of suspended particulate matters were conducted to elucidate the character of water column and the dispersal pattern in a floating ice-dominated fjord, Marian Cove, West Antarctica. Marian Cove showed two distinct water layers in terms of turbidity; 1) cold, fresh, and turbid surface plume in the upper 2 m,2) warm, saline, and relatively clean Maxwell Bay inflow between 15-45 m in water depth. Thermal melting of Maxwell Bay inflow and tidewater glacier/floating ices developed the surface mixed layer and the activity of floating ices cause Maxwell Bay inflow to be unstable. Due to the unstable water column, the development of Maxwell Bay inflow and subsequent surface plume are not influenced by tidal frequency. Coastal current generated by strong northwesterly wind may extend warm, saline, and turbid surface plume into the central part of the cove along the northern coast via the western coast of Weaver Peninsula. Terrigenous sediments of meltwaters from the glaciated ice cliffs near the corner of tidewater glacier and some coasts enter into the cove and their dispersion depends upon the hydrographic regimes (tide, wind, wave etc.). At the period of spring tide, the strong wind stress with the northwesterly wind direction reserve suspended sediment-fed surface plume and so allow the possibility of deposition of terrigenous sediments within the basin of cove.

• Korean Journal of Veterinary Research
• /
• v.16 no.1
• /
• pp.11-25
• /
• 1976

Studies on pathogenicities and developmental stages of Nosema apis (Zander, 1909) were carried out through artificial infection to Nosema free honey bees with various levels of spores isolated from local honey bee colony. The results obtained were summarized as follows: 1. The clinical symptoms were observed as dysentery, enteritis of mid-gut (enlargement and decoloration), crawling posture and shortening of the longevity of worker bees in the rearing honey bee colony inoculated with the spores. 2. Number of spores harvested from laboratory rearing honey bees were progresively increased to 4 weeks after inoculation. The regression equations and coefficients of correlations to various spore levels were as follows in each treatment colony. Colony 1. ($$1,000{\times}10^4spores/ml$$) $$y_{c1}=471{\times}10^{4}x+454{\times}10^4(r=0.65^*$$) Colony 2. ($$500{\times}10^4spores/ml$$) $$y_{c2}=340{\times}10^{4}x+207.8{\times}10^4(r=0.99^{**}$$) Colony 3. ($$100{\times}10^4spores/ml$$) $$y_{c3}=150{\times}10^{4}x+84.2{\times}10^4(r=0.99^{**}$$) Colony 4. ($$10{\times}10^4spores/ml$$) $$y_{c4}=13.8{\times}10^{4}x+13{\times}10^4(r=0.98^{**}$$) 3. Average longevity of worker bees artificially infected with Nosema apis was shortened as 21.7~43.8% compare to the control. (p<.05, p<.01) 4. The spores which were isolated from honey bee colony infected with Nosema disease were ovoid or spherical form, and measured, as a rule, from $4.7{\mu}m$ to $6.1{\mu}m$ (mean $5.3{\mu}m$) in length and from $2.4{\mu}m$ to $3.2{\mu}m$ (mean $2.9{\mu}m$) in width. 5. In the mid-gut of honey bees, the spore was progresively germinated and became trophozoite stage. The trophozoites were grown to meronts and their binary fission were begun. The divided two sporoblasts were developed to the spores which had elastic membrane. The new spores were shed in excreta of honey bees 10~15 day after inoculation at $25{\pm}2$ centigrade. 6. The ultrastructure of spore membrane consisted of three layers, such as, outer, middle and inner layer. The sporoplasm consisting lamellar structure occupied only anterior part of the spore and was often extended to posterior direction where definite vacuoles and a polar filament was able to detect.

• Land and Housing Review
• /
• v.2 no.3
• /
• pp.287-297
• /
• 2011

This paper presents the results of performance verification tests of the isolated flat plate apartment building with the laminated rubber bearings. The shaking table test is carried out in CABR(China Academy of Building Research) with two 1/10 scale isolation and non-isolation models under 4 excitation waves. The shaking table test is proceeding from x axis, y axis and x+y axis with different amplitude of acceleration values. The results show that, to non-isolated model, the natural vibration period is remarkably decreased and entered non-linear condition after moderate earthquake. Its accelerations become lager with increasing storey number and completely collapsed under large earthquake. The inter-storey shifts largely exceed the limit values of regulated displacement angles. But to isolated model, the natural vibration period of isolated modal is almost the same in all conditions and still in its elastic condition. The earthquake loading is greatly reduced and the accelerations of superstructure are greatly reduced. The inter-storey drifts are very small and can be neglected. The isolated model is in translational state and can be seen as a rigid whole. The displacements of isolation layer are in the allowable range. This experiment demonstrates that the seismic isolation is very effective to mitigate the influence of earthquake on structures and it is possible to increase the serviceability due to decrease the floor acceleration. facilities from their good states that is superior to non-isolated structure.

• Journal of the Microelectronics and Packaging Society
• /
• v.23 no.3
• /
• pp.63-67
• /
• 2016

In this paper, we present an indirect method of elastic modulus measurement for various lamination layers formed on polymer-based compliant substrates. Although the elastic modulus of every component is crucial for mechanically reliable microelectronic devices, it is difficult to accurately measure the film properties because the lamination layers are hardly detached from the substrate. In order to resolve the problem, 3-point bending test is conducted with a film-substrate specimen and area transformation rule is applied to the cross-sectional area of the film region. With known substrate modulus, a modulus ratio between the film and the substrate is calculated using bending stiffness of the multilayered specimen obtained from the 3-point bending test. This method is verified using electroplated copper specimens with two types of film-substrate structure; double-sided film and single sided film. Also, common dielectric layers, prepreg (PPG) and dry film solder resist (DF SR), are measured with the double-sided specimen type. The results of copper (110.3 GPa), PPG (22.3 GPa), DF SR (5.0 GPa) were measured with high precision.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.1
• /
• pp.179-183
• /
• 2019

The system stability must be ensured from the switching noise due to the power conversion efficiency and power conversion system miniaturization. Therefore, countermeasures to reduce switching noise during power conversion are essential. Thus, in the previous paper, we constructed the DC / DC Buck Converter circuit using MPQ4432 driver of MPS, and simulated the switching noise characteristics which occurs when the components are arranged differently in the 4 - layer PCB circuit structure with reference plane. In this paper, two different simulated circuits are fabricated and the characteristics of the conducted emission and the radiated emission are analyzed in the same way as the simulation. As a result, it was confirmed that the Conducted Emission characteristic was reduced by 2 ~ 9dB in the low frequency band and 6 ~ 7dB in the high frequency band depending on the configuration of the current return path. And the radiated emission characteristic is reduced by 9 dB. Conducted emission simulation results show that 6 ~ 7dB in the low frequency range and 2 ~ 9dB in the measurement result are somewhat different. In the high frequency band, it is confirmed that the experimental and simulation results are about 7dB. And Radiated Emission confirmed 12dB decrease in simulation, but confirmed decrease of 9dB in measurement result. It is confirmed that there is a slight difference in the amount of reduction, but the design of the power conversion circuit improves the noise characteristics according to the configuration of the current return path.