• 한국항공우주학회지
• /
• 제49권3호
• /
• pp.243-249
• /
• 2021

별추적기는 우주공간에서 미세한 별 빛을 감지한 후 저장된 별 목록과 비교하여 관성좌표계상에서 위성의 자세 정보를 제공한다. 별 이외에 태양이나 지구와 같은 다른 빛이 광학계(OH : Optical Head)로 들어가게 될 경우 별을 인식할 수 없음으로 별추적기를 운영할 수 없다. 특히, 태양과 같은 강한 빛이 들어올 경우 별추적기 운영뿐 아니라 성능에도 영향을 미친다. 별추적기의 태양 차폐각(SEA : Sun Exclusion Angle)은 별추적기의 성능을 결정하는 중요한 요소 중 하나이다. 본 논문에서는 별추적기의 태양 차폐각에 대한 검증을 수행하였다. 태양 차폐각 검증을 위해서 별추적기의 태양 차폐 시간을 예측하였으며 실제 천리안 2A호 별 추적기에서 발생한 태양 차폐 시간과 비교하였다. 또한, 광학계에 태양에 의한 차폐가 발생할 경우 별추적기가 정상적으로 동작하는지에 대한 분석을 수행하였다. 분석 결과 별추적기는 성능 요구사항인 26° 이내에서 태양 차폐가 발생하였으며 태양 차폐가 발생할 경우에도 정상 동작함을 확인하였다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2009년도 하계학술대회 논문집
• /
• pp.220-220
• /
• 2009

In case of favourable irradiation conditions, the ratio of irradiation to the total irradiation went up and then the irradiation increased in the area with high angle of inclination. The study showed that on a clear day with the irradiation of more than $800[W/m^2]$, the pattern of alternating current power change in the fixed system was similar with that in the single-axis tracker. On the contrary, in case of unfavourable irradiation conditions, the ratio of diffuse irradiation to the total irradiation went up and then the horizontal irradiation increased. In the demo system, the fixed system, the single-axis tracker and the dual-axis tracker all had low generation power and similar generation pattern with each other. The study showed the generation power varied with the irradiation in the fixed system, while in the single-axis tracker and the dual-axis tracker, the amount of the generation power variation was much more than the irradiation variation. The demo system was operated from 11:00 AM to 2:00 PM for generating power, during which time, 46[%] to 56[%] of the total generation power was produced. In this study. the generation power was increased by 147[%] in the fixed system, by 136[%] in the single-axis tracker, and by 164[%] in the dual-axis tracker, and the pattern of generation power was similar with the generation power variation in the situation where the irradiation increased by 140[%] in the spring with plenty of insolation. The alternating current power was more sensitive to variation of the irradiation than to that of the surface temperature of a module. The variation of the irradiation had a more positive effect on the generation power than the type of array.

• 조명전기설비학회논문지
• /
• 제27권12호
• /
• pp.1-9
• /
• 2013

A standalone LED lighting system in using solar energy has been used usually less than 70W of lighting power because of a troublesome installation and maintenance. In this system, as more and more LED lighting power increases, the capacity of photovoltaic panel does proportionally, and to improve the charging efficiency of solar energy, MPPT(Maximum Power Point Tracking) techniques is used frequently, but the solar tracker is not. In this paper, a solar tracker which traces the light of the sun in varying hour to hour is studied to apply to the standalone LED lighting system. This solar tracker consists of twin axis for tracing the azimuth and altitude respectively, and it has a robust structure with safe mode to stand a strong wind. As a result of analysis, generating efficiency of the traced type has improved on the fixed one 28.84% on average.

• 한국측량학회:학술대회논문집
• /
• 한국측량학회 2010년 춘계학술발표회 논문집
• /
• pp.77-80
• /
• 2010

The demand for human security significantly promotes the development of surveillance applications using a multi-sensor integrated UAV system. For more sophisticated operations, the system should provide a sequence of images rectified in a ground coordinate system in realtime. This rectification requires accurate position and attitude of the camera at the time of exposure of each image, which can be estimated through an Aerial Triangulation process using the GPS/INS data and tie points between adjacent images. In this work, the KLT tracker is utilized to obtain the tie points. To satisfy the realtime requirements, we present an approach to speed up the tracker by supplying the initial guessed positions of tie points based on the exterior orientation. The experimental results show that, when the guessed positions are supplied, the KLT tracker consumed less computational time than the ordinary KLT which is more suitable to be incorporated into the realtime image georeferencing process.

• 한국생산제조학회지
• /
• 제22권2호
• /
• pp.216-222
• /
• 2013

A solar power generator is usually installed outdoors and it is exposed to extreme environments such as heavy fall of snow and high speed wind. Therefore, the solar tracker structure should be designed to have sufficient static and dynamic stiffness against such environmental conditions. In this paper, eigenvalue analysis of the solar tracker is carried out by varying the pose of the solar panel and unsteady flow analysis around a single tracker or multi-trackers arranged in a line is performed by varying the parameters such as wind directions, wind speeds and the pose of the solar panel to evaluate whether there exists an instability of resonance due to vortex shedding. Finite element eigenvalue analysis shows that natural frequencies and modes are almost not influenced by the pose of the solar panel and the finite element flow analysis shows that there does not exist periodic vortex shedding due to the flow around single tracker or multiple solar trackers in a line.

• 제어로봇시스템학회논문지
• /
• 제22권8호
• /
• pp.579-584
• /
• 2016

When surgical instruments are tracked in an image-guided surgical navigation system, a stereo vision system with high accuracy is generally used, which is called optical tracker. However, this optical tracker has the disadvantage that a line-of-sight between the tracker and surgical instrument must be maintained. Therefore, to complement the disadvantage of optical tracking systems, an internal vision sensor is attached to a surgical instrument in this paper. Monitoring the target marker pattern attached on patient with this vision sensor, this surgical instrument is possible to be tracked even when the line-of-sight of the optical tracker is occluded. To verify the system's effectiveness, a series of basic experiments is carried out. Lastly, an integration experiment is conducted. The experimental results show that rotational error is bounded to max $1.32^{\circ}$ and mean $0.35^{\circ}$, and translation error is in max 1.72mm and mean 0.58mm. Finally, it is confirmed that the proposed tool tracking method using an internal vision sensor is useful and effective to overcome the occlusion problem of the optical tracker.

• 한국기계가공학회지
• /
• 제9권1호
• /
• pp.67-73
• /
• 2010

Finding sufficient supplies of clean energy for future is one of the society's most important challenges according to technologies. Alternative renewable energy source such as sun energy can be substituted for exceeding human energy need. The main factor affect to solar performance is a collective intensity. To enhance intensity, suitable equipment is a solar tracker. This paper presents design and evaluation of 1 layer polar motion control system for solar tracker suitable for building integrated system. To evaluation of tracking accuracy and adaptability, solar tracker with 64 links is implemented. In experimental results, the accuracy of tracking has under ${\pm}0.0287^{\circ}$ and the thickness has under 140mm.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제34권1호
• /
• pp.41-52
• /
• 2012

Purpose: Triangulation is the process of determining the location of a point by measuring angles to it from known points at either end of a fixed baseline. This point can be fixed as the third point of a triangle with one known side and two known angles. The aim of this study was to find a clinically adaptable method for applying an optical tracking navigation system to orthognathic surgery and to estimate its accuracy of measuring the bone displacement by use of triangulation methods. Methods: In orthognathic surgery, the head position is not fixed as in neurosurgery, so that a head tracker is needed to establish the reference point on the head surface byusing an optical tracking system. However, the operation field is interfered by its bulkiness that makes its clinical use difficult. To solve this problem, we designed a method using an Aquaplast splinting material and a mini-screw in applying a head tracker on a patient's forehead. After that, we estimated the accuracy of measuring displacements of the ball marker by an optical tracking system with a conventional head tracker (Group A) and with a newly designed head tracker (Group B). Measured values of ball markers' displacements by each optical tracking system were compared with values obtained from fusion CT images for an estimation of accuracy. Results: The accuracy of the optical tracking system with a conventional head tracker (Group A) is not suitable for clinical usage. Measured and predictable errors are larger than 10 mm. The optical tracking system with a newly designed head tracker (Group B) shows 1.59 mm, 6.34 mm, and 9.52 mm errorsin threeclinical cases. Conclusion: Most errors were brought on mainly from a lack of reproducibility of the head tracker position. The accuracy of the optical tracking system with a newly designed head tracker can be a useful method in further orthognathic navigation surgery even though the average error is higher than 2.0 mm.

• 한국ITS학회 논문지
• /
• 제21권5호
• /
• pp.274-286
• /
• 2022

이동객체 추적은 컴퓨터 비전 분야에서 오랜 시간 동안 연구가 진행되어 온 분야로 자율주행이나 운전 보조 시스템 등의 시스템에서 아주 중요한 역할을 수행하고 있다. 이동객체 추적 기술은 일반적으로 객체를 검출하는 검출기와 검출된 객체를 추적하는 추적기의 결합으로 이루어져 있다. 검출기는 다양한 데이터셋이 공개되어 사용되고 있기 때문에 쉽게 좋은 모델을 학습할 수 있지만, 추적기의 경우 상대적으로 공개된 데이터셋도 적고 직접 데이터셋을 구성하는 것도 검출기 데이터셋에 비해 굉장히 오랜 시간을 소요한다. 이에 검출기를 따로 개발하고, 별도의 추적기를 학습 기반이 아닌 방식을 활용하여 개발하는 경우가 많은데 이런 경우 두 개의 시스템이 차례로 작동하게 되어 전체 시스템의 속도를 느리게 하고 앞단의 검출기의 성능이 변할 때마다 별도로 추적기 또한 조정해줘야 한다는 단점이 있다. 이에 본 연구는 검출용 데이터셋만을 사용하여 검출과 추적을 동시에 수행하는 모델을 구성하는 방법을 제안한다. 데이터 증강 기술과 샴 네트워크를 사용하여 단일 이미지에서 객체를 검출 및 추적하는 방법을 연구하였다. 공개 데이터셋에 실험을 진행하여 학습 결과 높은 속도로 작동하는 이동객체 검출 및 추적기를 학습할 수 있음을 검증하였다.

• 한국정보과학회:학술대회논문집
• /
• 한국정보과학회 2010년도 한국컴퓨터종합학술대회논문집 Vol.37 No.1(A)
• /
• pp.317-318
• /
• 2010

클라우드 컴퓨팅 서비스를 제공하기 위해서는 클라우드 컴퓨팅에 적합한 데이터 분산 저장 및 병렬 처리가 가능한 IT 인프라 구축이 필수적이다. 이를 위해서 분산 파일 시스템 중 하나인 HDFS(Hadoop File System)와 병렬 데이터 처리를 지원하기 위한 MapReduce 프레임워크 관련 연구가 각광 받고 있다. 하지만 MapReduce 프레임워크를 구성하는 JobTracker 노드는 SPoF(Single Point of Failure)이기 때문에, 작업 도중 JobTracker 노드의 결함이 발생하게 되면 전체 작업이 실패하게 된다. 위와 같은 문제를 해결하기 위해서 본 논문에서는 MapReduce 프레임워크의 JobTracker 노드 결함 발생에 대처할 수 있는 결함허용 메커니즘을 제안하였다.