• Journal of the Korean Mathematical Society
• /
• v.49 no.1
• /
• pp.187-200
• /
• 2012

In this paper, we introduced a new extended extragradient iteration algorithm for finding a common element of the set of fixed points of a nonexpansive mapping and the set of solutions of equilibrium problems for a monotone and Lipschitz-type continuous mapping. And we show that the iterative sequences generated by this algorithm converge strongly to the common element in a real Hilbert space.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.49 no.6
• /
• pp.521-528
• /
• 2021

In order to allocate an appropriate interceptor weapon to an air track for which the threat assessment has been completed, it is necessary to evaluate the suitability of engagement in consideration of the expected point of engagement. In this thesis, a method of calculating the kill probability is proposed according to the position in the engagement space using Bayesian theorem with multivariate attribute information such as relative distance, approach azimuth angle, and altitude of the air track when passing through the engagement space. As a result of the calculation, it was confirmed that the distribution form of the kill probability value for each point in the engagement space follows a multivariate normal distribution based on the optimal predicted intercepting point. It is expected to be applicable to the engagement suitability evaluation of the engagement space.

• Journal of Broadcast Engineering
• /
• v.8 no.1
• /
• pp.45-53
• /
• 2003

Traffic specification plays a crucial role in the resource reservation for video services over the packet-switching networks. The current development of QoS-guaranteed service still leaves a wide space for the selection of traffic specification. We propose a new method to estimate the traffic specification of variable-bit-rate (VBR) video for deterministic service. The method is based on the concept of empirical envelope and the delay bound. The solution shows to be simple yet it provides excellent network utilization.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.50 no.5
• /
• pp.3-15
• /
• 2008

This study aims to simulate the 3 dimensional (3D) model of Keum-man connection canal using geographic information system (GIS) as well as considering design in viewpoint of engineering. The canal connects from Keumkang to Mangyungkang in order to supply fresh water into Saemankeum lake. This study used 3 dimensional spatial planning model (3DSPLAM) process to generate the 3D model, which has not only several planning layers in actual process, but also their corresponding layers in modeling process to simulate 3D space of rural villages. The discharge of the canal is $20m^3/s$ on slope of 1/28,400 in the canal length of 14.2km, which consists of pipe line and open channel. This study surveyed the route of the canal and its surrounding environment for facilities to make images in the 3D graphic model. Besides, the present study developed data set in GIS for geogrphical surface modeling as well as parameters in hydraulic analysis for water surface profile on the canal using HEC-RAS model. From the data set constructed, this study performed analysis of water surface profile with HEC-RAS, generation of digital elevation model (DEM) and 3D objects, design of the canal section and route on DEM in AutoCAD, and 3D canal model and its surrounding 3D space in 3DMAX with virtual reality. The study result showed that the process making 3D canal model tried in this study is very useful to generate computer graphic model with the designed canal on the surface of DEM. The generated 3D canal can be used to assist decision support for the canal policy.

• Proceedings of the IEEK Conference
• /
• 2001.06c
• /
• pp.229-232
• /
• 2001

Wireless Internet based in WAP(Wireless Application Protocol) has been a very useful and attractive means picking up information through service irrelavant to time and space. And more the request of user has been diverse. In this paper, we implemented a Diet Menu System using expert knowledge-based rules on the WAP environment. This enables the moving man interested in diet to get information through wireless mobil hand phone. There are only connection-oriented system for this type of service till now. This paper has designed basic expert knowledge rules for result display, verified and implemented for WAP environment.

• Journal of Institute of Control, Robotics and Systems
• /
• v.19 no.10
• /
• pp.921-927
• /
• 2013

This paper presents a user interface for vision based indirect teaching of a robotic manipulator with Kinect and IMU (Inertial Measurement Unit) sensors. The user interface system is designed to control the manipulator more easily in joint space, Cartesian space and tool frame. We use the skeleton data of the user from Kinect and Wrist-mounted IMU sensors to calculate the user's joint angles and wrist movement for robot control. The interface system proposed in this paper allows the user to teach the manipulator without a pre-programming process. This will improve the teaching time of the robot and eventually enable increased productivity. Simulation and experimental results are presented to verify the performance of the robot control and interface system.

• Nuclear Engineering and Technology
• /
• v.39 no.1
• /
• pp.63-74
• /
• 2007

In this paper, a reconfigurable controller consisting of a normal controller and a standby controller is designed to control the thermoelectric (TE) power in the SP-100 space reactor. The normal controller uses a model predictive control (MPC) method where the future TE power is predicted by using support vector regression. A genetic algorithm that can effectively accomplish multiple objectives is used to optimize the normal controller. The performance of the normal controller depends on the capability of predicting the future TE power. Therefore, if the prediction performance is degraded, the proportional-integral (PI) controller of the standby controller begins to work instead of the normal controller. Performance deterioration is detected by a sequential probability ratio test (SPRT). A lumped parameter simulation model of the SP-100 nuclear space reactor is used to verify the proposed reconfigurable controller. The results of numerical simulations to assess the performance of the proposed controller show that the TE generator power level controlled by the proposed reconfigurable controller could track the target power level effectively, satisfying all control constraints. Furthermore, the normal controller is automatically switched to the standby controller when the performance of the normal controller degrades.

• Journal of Chest Surgery
• /
• v.23 no.6
• /
• pp.1275-1279
• /
• 1990

Esophagopleural fistula is a rare complication that should be suspected in all patients with recurrent empyema following pneumonectomy and in whom a bronchopleural fistula can be excluded. In late postpneumonectomy esophagopleural fistula, diagnosis is difficult due to its rarity and no specific symptom and sign, but we have experienced a man who had suffered dysphagia and odynophagia. In surgical treatment of late postpneumonectomy esophageal fistula, closure of empyema space is of prime importance. We have adopted a type of latissimus dorsi muscle and serratus anterior muscle flap transposition We present here this technique and result obtained in patient with late postpneumonectomy esophagopleural fistula.

• Korean Institute of Interior Design Journal
• /
• v.22 no.5
• /
• pp.11-21
• /
• 2013

The development of modern industry and the production of new materials of architecture have recognized as an important aspect. This study intended to discuss about the meaning of main elements of the architecture materials, its implications for properties, and, highlighted meaning of the properties of modern interior design. The purpose of this study is to analyze the case studies of Place and Physical materials of synaesthesia of modern architecture as well as modern architecture is not only concentrated in the visual aspect but also the larger ramifications of sensory. Synesthesia in architectural space can be called experiential existence that built in the space of human perception and based on the human emotion that targeted by physical architectural space. Accordingly, these case studies are to consider about how the materials being passed by any effect in a modern interior space presented, In order to find the essential meaning in modern interior space, this studies focused on Swiss architect Peter Zumthor's cases. Following analyze of Peter Zumthor's place of architectural space and materials, this study structured by the six kinds of synesthesia characters. First, time and remember to infer changes, Second, traditional and regional ingredients involve the substitution of one empirical space, Third, non-materiality through the neutralization, Fourth, auditory memory through the embodiment of everydayness, Fifth, trail through the sense of smell for the presence, Sixth, the relationship of natural and industrial products. Peter Zumthor's characteristics of these works are result of factors on the synesthetic relationship with the human response to architecture, the five senses, memories, experiences, and temperature. Also it is a synesthetic result of all human emotion to clarify of the architecture materials and non-material mediums by which light by a compound.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.18 no.4
• /
• pp.87-92
• /
• 2019

In this paper, a closed hydroponics device was designed and fabricated to grow and harvest plants in a small space for safe consumption, which enables horticultural activities that are difficult to perform due to space constraints from urbanization. This device also aimed to minimize the air pollution of crops. To obtain data for the optimal growth conditions for crops in this intelligent plant-growing system, sensors were used to measure and control the growth conditions. To investigate the optimal growth conditions, blue lettuce and crown daisy were selected as representative crops. The growth rates were comparatively analyzed through four experiments for each plant. This hydroponics device was used to collect data on growth rates that are altered depending on cultivation conditions, which can then be used to study methods to control the growth rate of crops.