• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.44 no.1
• /
• pp.146-154
• /
• 2007

In this paper, we have presented a real-time transfer mechanism for the delay-sensitive data in WSNs (Wireless Sensor Networks). The existing methods for real-time data transfer select a path whose latency is shortest or the number of hops is least. Although the approaches of these methods are acceptable, they do not always work as efficiently as they can because they had no consideration for the link error rates. In the case of transmission failures on links, they can not guarantee the end-to-end real-time transfer due to retransmissions. Therefore, we have proposed an algorithm to select a real-time transfer path in consideration of the link error rates. Our mechanism estimates the 1-hop delay based on the link error rate between two neighboring nodes, which in turn enables the calculation of the expected end-to-end delay. A source node comes to choose a path with the shortest end-to-end delay as a real-time route, and sends data along the path chosen. We performed various experiments changing the link error rates and discovered that this proposed mechanism improves the speed of event-to-sink data transfer and reduces delay jitter. We also found that this mechanism prevents additional energy consumption and prolongs network lifetime, resulting from the elative reduction of transmission failures and retransmissions.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.7 no.3
• /
• pp.1-14
• /
• 2008

Mass transit information should contribute many benefits to users. Especially transportation information technology is developing highly with information technology in Korea recently. Hereafter it is expected to provide customized transportation information to users individually with the advent of ubiquitous age in earnest. This public transportation information service can be realized by path finding algorithms in public transportation networks including travel and transfer attributes. In this research, multi objectives such as travel time, transfer time, and number of transfer and so on are constructed with the primary facts influencing users. Moreover, the method reducing user's path finding alternatives arbitrarily is proposed by selecting the best alternative which provides maximum utility to users among non dominated paths. Therefore, the ultimate goal of this study proposes a multi objective shortest paths finding algorithm which can take into account multiple user classes in a transit network with multiple travel modes. The proposed algorithm is demonstrated based on the two case studies - a small toy network and the large-scaled Seoul Metropolitan subway network.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.11
• /
• pp.740-745
• /
• 2016

Cables are installed for tens of thousands of connections between various pieces of equipment to operate and control a commercial ship. The correct shortest-route data is necessary since these are complicated cable installations. Therefore, an overfill interval commonly exists in the shortest paths for cables as estimated by Dijkstra's algorithm, even if this algorithm is generally used. It is difficult for an electrical engineer to find the overfill interval in 3D cable models because the occupancy rate data exist in a data sheet unlinked to three-dimensional (3D) computer-aided design (CAD). The purpose of this study is to suggest a visualization method that displays the cable path and overfill interval in 3D CAD. This method also provides various color visualizations for different overfill ranges to easily determine the overfill interval. This method can reduce cable-installation man-hours from 7,000 to 5,600 thanks to a decreased re-installation rate, because the cable length calculation's accuracy is raised through fast and accurate reviews based on 3D cable visualization. As a result, material costs can also be reduced.

• Journal of Korean Society of Transportation
• /
• v.21 no.1
• /
• pp.91-102
• /
• 2003

There are two goals in this paper. The one is development of existing CA(Cellular Automata) model to explain more realistic deceleration process to stop. The other is the application of the updated CA model to forecasting simulation to predict short term link travel time that takes a key rule in finding the shortest path of route guidance system of ITS. Car following theory of CA models don't makes not response to leading vehicle's velocity but gap or distance between leading vehicles and following vehicles. So a following vehicle running at free flow speed must meet steeply sudden deceleration to avoid back collision within unrealistic braking distance. To tackle above unrealistic deceleration rule, “Slow-to-stop” rule is integrated into NaSch model. For application to interrupted traffic flow, this paper applies “Slow-to-stop” rule to both normal traffic light and random traffic light. And vehicle packet method is used to simulate a large-scale network on the desktop. Generally, time series data analysis methods such as neural network, ARIMA, and Kalman filtering are used for short term link travel time prediction that is crucial to find an optimal dynamic shortest path. But those methods have time-lag problems and are hard to capture traffic flow mechanism such as spill over and spill back etc. To address above problems. the CA model built in this study is used for forecasting simulation to predict short term link travel time in Kangnam district network And it's turned out that short term prediction simulation method generates novel results, taking a crack of time lag problems and considering interrupted traffic flow mechanism.

• Journal of the Korean Regional Science Association
• /
• v.33 no.1
• /
• pp.29-41
• /
• 2017

This study proposes an integrated accessibility measurement algorithm, which is applied to the Seoul Metropolitan public transportation system consisting of bus and subway networks, and analyzes the result. We construct a public transportation network graph linking bus-subway networks and take the time distance as the link weight in the graph. We develop a time-distance algorithm to measure the time distance between each pair of transit stations based on the T-card transaction database. The average travel time between nodes has been computed via the shortest-path algorithm applied to the time-distance matrix, which is obtained from the average speed of each transit route in the T-card transaction database. Here the walking time between nodes is also taken into account if walking is involved. The integrated time-distance accessibility of each node in the Seoul Metropolitan public transportation system has been computed from the T-card data of 2013. We make a comparison between the results and those of the bus system and of the subway system, and analyze the spatial patterns. This study is the first attempt to measure the integrated time-distance accessibility for the Seoul Metropolitan public transportation system consisting of 16,277 nodes with 600 bus routes and 16 subway lines.

• Journal of KIISE:Information Networking
• /
• v.30 no.1
• /
• pp.126-133
• /
• 2003

The existing active routing Protocols assume that the active network topology is static or pre-configured. However a dynamic mechanism to route an active Packet according to the network condition is required due to the dynamic characteristic of the active network. As active routing protocols, SLRP and TCOM500 PLAN project have been proposed, but since both of them are based on the assumption of the static topology we can not say that they are dynamic routing protocols in their entirety. Therefore, in this paper, we propose a new active network routing protocol, called AOSPF (Active Open Shortest Path First), which is compatible with the existing IP routing protocol. AOSPF is an extension of OSPF by adding a new LSA (Link State Advertisement) to allow the active network routing. The newly introduced LSA is used to specify whether the corresponding router is an active router or not. and one bit in the OPTION field of an LSA packet is used as the active router indication bit. This way of extending OSPF is similar to the scheme used in the extension of OSPF for multicast, i.e., MOSPF. In this paper, we will present the operation of AOSPF and the way how an active packet is forwarded based on the active network topology information constructed by AOSPF.

• Journal of Korean Society of Transportation
• /
• v.22 no.2 s.73
• /
• pp.131-143
• /
• 2004

Given a path represented by a sequence of link numbers in a graph, the vine is differentiated from the loop in a sense that any link number can be visited in the path no more than once, while more than once in the loop. The vine provides a proper idea on complicated travel patterns such as U-turn and P-turn witnessed near intersections in urban transportation networks. Application of the link label method(LLM) to the shortest Path algorithms(SPA) enables to take into account these vine travel features. This study aims at expanding the LLM to a K-th path search algorithm (KPSA), which adopts the node-based-label correcting method to find a group of K number of paths. The paths including the vine type of travels are conceptualized as drivers reasonable route choice behaviors(RRCB) based on non-repetition of the same link in the paths, and the link-label-based MPSA is proposed on the basis of the RRCB. The small-scaled network test shows that the algorithm sequence works correctly producing multiple paths satisfying the RRCB. The large-scaled network study detects the solution degeneration (SD) problem in case the number of paths (K) is not sufficient enough, and the (K-1) dimension algorithm is developed to prevent the SD from the 1st path of each link, so that it may be applied as reasonable alternative route information tool, an important requirement of which is if it can generate small number of distinct alternative paths.

• Journal of KIISE:Information Networking
• /
• v.32 no.1
• /
• pp.100-109
• /
• 2005

A Mobile Ad-Hoc Network (MANET) supports a multi-hop wireless network without any prepared base station (BS). The MANET is capable of building a mobile network automatically without any help from DHCP servers for address allocation or routers to forward or route messages. Many routing protocols have been proposed for the MANET, but these specify the most optimized or shortest path from a source to a destination, and they assume that nodes are pre-configured before communication. To make up for this, address allocation algorithms, such as MANETConf [1] and prophet address allocation algorithm [2], have been proposed. Especially, MANETConf proposes address allocation algorithm with duplication address check. In this paper, we present a dynamic node configuration protocol based on 2-tierd hierarchical network architecture for mobile ad-hoc network, modified from [1]. Especially, it reduces the number of broadcast message exchange between nodes when a new node somes into a network, which lessens network overhead, remarkably. This protocol is based on two-tired structure, and it ensures address allocation with simple duplication address defection mechanism.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.11 no.3
• /
• pp.49-56
• /
• 2011

This paper deals with a methodology for searching optimal route of hazard material (hazmat) vehicles. When we make a decision of hazmat optimal paths, there is a conflict between the public aspect which wants to minimize risk and the private aspect which has a goal of minimizing travel time. This paper presents Efficient Vector Labeling algorithm as a methodology for searching optimal path of hazmat transportation, which is intrinsically one of the multi-criteria decision making problems. The output of the presented algorithm is a set of Pareto optimal paths considering both risk and travel time at a time. Also, the proposed algorithm is able to identify non-dominated paths which are significantly different from each other in terms of links used. The proposed Efficient Vector Labeling algorithm are applied to test bed network and compared with the existing k-shortest path algorithm. Analysis of result shows that the proposed algorithm is more efficient and advantageous in searching reasonable alternative routes than the existing one.

• The KIPS Transactions:PartD
• /
• v.12D no.2 s.98
• /
• pp.259-266
• /
• 2005

Recently data centric routing or application dependent routing protocols are emerged in mobile ad hoc networks. In this paper, we propose a routing method for query processing in MANET(Mobile Ad hoc NETwork) environment, called road-based query routing, with consideration on real time traffic information of large number of vehicles. In particular, we focus on the method that process arrival time dependent shortest path query in MANET without a central server on the road networks. The main idea of our approach lies in a routing message that includes query predicates based on the road connectivity and on data gathering method in real time from vehicles on the road by ad-hoc network. We unify route discovery phase and data delivery(query processing) phase in our mechanism and reduce unnecessary flooding messages by pruning mobile nodes which are not on the same or neighboring road segments. In order to evaluate the performances of the proposed method, we established a model of road networks and mobile nodes which travel along the roads. The measurement factor is the number of nodes to whom route request is propagated according to each pruning strategy. Simulation result shows that road information is a dominant factor to reduce the number of messages.