• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.31A no.10
• /
• pp.21-30
• /
• 1994

We discussed the Distributed Control System's design on preface and analyzed time of the real-time communication by using designed system. The DCS proposed in this thesis was implemented to network file system having recovery advantage and shared memory method to access file system of a Remote Station with ease. Also, this system minimized the network delay-time by using the real-time VME147 board. In implemented DCS, the performance analysis of real-time process of a Remote Station was done to get the total time for reak-tune communication from a Remote Station to the Central Station after terminating of process. For the analysis of system performance, we experiented by three steps. Firstly, we measuredthe processing the of LOOP function that real-time CPU convertes to-2,500~10.000 values from the input data of the Analog Interface Card. Secondly, we measured the processing time of the LOGIC function and the LOOP function. Lastly, we measured total processing time for communication from a Remote Station to the Centrol Station.

• Journal of the Optical Society of Korea
• /
• v.12 no.3
• /
• pp.166-169
• /
• 2008

The submersion monitoring system based on a reflective side-polished optical fiber submersion sensor with an optical fiber mirror was shown to be an effective alarm system with remote monitoringwhen the drainage capacity of a common utility duct is exceeded due to heavy rainfall. The proposed sensor was connected to an existing installed optical fiber network at a height of 250mm in a common utility duct, and then tested under sample materials(distilled water, river water, sea water, foul water, muddy water, petroleum, edible oil) at a distance of 1km from the sensor for remote sensing. In experiments, the proposed real-time sensor system reduced maintenance cost and improved monitoring efficiency by using a reflection-type side-polished optical fiber submersion sensor efficient for remote monitoring of a common utility duct.

• Journal of Mechanical Science and Technology
• /
• v.19 no.5
• /
• pp.1095-1106
• /
• 2005

Recently, the conventional controller of machine-tool has been increasingly replaced by the PC-based open architecture controller, which is independent of the CNC vendor and on which it is possible to implement user-defined application programs. This paper proposes CNC­implemented fault diagnosis and web-based remote services for machine-tool with open architecture CNC. The faults of CNC machine-tool are defined as the operational faults occupied by over $70{\%}$ of all faults. The operational faults are unpredictable as they occur without any warning. Two diagnostic models, the switching function and the step switching function, were proposed in order to diagnose faults efficiently. The faults were automatically diagnosed through the fault diagnosis system using the two diagnostic models. A suitable interface environment between CNC and developed application modules was constructed for the internal function of CNC. In addition, a suitable web environment was constructed for remote services. The web service functions, such as remote monitoring and remote control, were implemented, and their operability was tested through the web. The results obtained through this research could be a model of fault diagnosis and remote servicing for machine-tool with open architecture CNC.

• Korean Journal of Remote Sensing
• /
• v.20 no.3
• /
• pp.153-162
• /
• 2004

In the summer of 1998-2001, a huge flood occurred in the Yangtze River in the eastern China. Low salinity water less than 28 psu from the river was detected around the southwestern part of the Jeju Island, which is located in the southern part of the Korean Peninsula. We studied how to detect low salinity water from the Yangtze River, that cause a terrible damage to the Korean fisheries. We established a relationships between low salinity at surface, turbid water from the Yangtze River and digital ocean color remotely sensed data of SeaWiFS sensor in the northern East China Sea, in the summer of 1998, 1999, 2000 and 2001. The salinity charts of the northern East China Sea were created by regeneration of the satellite ocean color data using the empirical formula from the relationships between in situ low salinity, in situ measured turbid water with transparency and SeaWiFS ocean color data (normalized water leaving radiance of 490 nm/555 nm).

• International Journal of Internet, Broadcasting and Communication
• /
• v.12 no.4
• /
• pp.109-121
• /
• 2020

As a decrease in labor became a serious issue in the manufacturing industry, smart factory technology, which combines IT and the manufacturing business, began to attract attention as a solution. In this study, we have designed and implemented a real-time remote management system for smart factories, which is connected to an IoT sensor and gateway, for plastic manufacturing plants. By implementing the REST API in which an IoT sensor and smart gateway can communicate, the system enabled the data measured from the IoT sensor and equipment status data to the real-time monitoring system through the gateway. Also, a web-based management dashboard enabled remote monitoring and control of the equipment and raw material processing status. A comparative analysis experiment was conducted on the suggested system for the difference in processing speed based on equipment and measurement data number change. The experiment confirmed that saving equipment measurement data using cache mechanisim offered faster processing speed. Through the result our works can provide the basic framework to factory which need implement remote management system.

• Journal of Environmental Impact Assessment
• /
• v.13 no.5
• /
• pp.263-276
• /
• 2004

This research is primarily intended to propose a new concept for aggregate control of impervious coverage using remote sensing and GIS. An empirical study for a case study site was conducted to demonstrate how a standard remote sensing and GIS technology can be used to assist in implementing the aggregate control for impervious coverage as intermediary between decision makers and scientists. Guidelines for a replicable methodology are presented to provide a strong theoretical basis for the standardization of factors involved in the aggregate control; the meaningful definition of land mosaic in terms of pervious areas, classification of pervious intensity, change detection for pervious areas. Detailed visual maps (e.g. estimation of impervious surface allowable) can be generated over large areas quickly and easily to increase the scientific and objective decision-making for the aggregate control. It is anticipated that this research output could be used as a valuable reference to confirm the potential of remote sensing and GIS in the aggregate control for impervious coverage.

• Proceedings of the KIEE Conference
• /
• 1999.07g
• /
• pp.3206-3208
• /
• 1999

This paper describes the remote fault monitoring system for tower parking facilities. This system consists of central station, remote monitoring equipments and communication equipments. The central station is developed under client-server architecture which composed a DB server, a fault detection client, a status collection client and a A/S client. And the remote monitoring systems are connected to central station by LAN using RAS(Remote Access Service) which is constructed PSTN(Public Switched Telephone Network). This system offers real-time fault detection and status data acquisition of tower parking system.

• Archives of Plastic Surgery
• /
• v.44 no.5
• /
• pp.384-389
• /
• 2017

Background The aim of this study was to investigate the effects of remote ischemic conditioning on ischemia-reperfusion injury in rat muscle flaps histopathologically and biochemically. Methods Thirty albino rats were divided into 5 groups. No procedure was performed in the rats in group 1, and only blood samples were taken. A gracilis muscle flap was elevated in all the other groups. Microclamps were applied to the vascular pedicle for 4 hours in order to achieve tissue ischemia. In group 2, no additional procedure was performed. In groups 3, 4, and 5, the right hind limb was used and 3 cycles of ischemia-reperfusion for 5 minutes each (total, 30 minutes) was applied with a latex tourniquet (remote ischemic conditioning). In group 3, this procedure was performed before flap elevation (remote ischemic preconditoning). In group 4, the procedure was performed 4 hours after flap ischemia (remote ischemic postconditioning). In group 5, the procedure was performed after the flap was elevated, during the muscle flap ischemia episode (remote ischemic perconditioning). Results The histopathological damage score in all remote conditioning ischemia groups was lower than in the ischemic-reperfusion group. The lowest histopathological damage score was observed in group 5 (remote ischemic perconditioning). Conclusions The nitric oxide levels were higher in the blood samples obtained from the remote ischemic perconditioning group. This study showed the effectiveness of remote ischemic conditioning procedures and compared their usefulness for preventing ischemiareperfusion injury in muscle flaps.

• Proceedings of the KSRS Conference
• /
• 2002.10a
• /
• pp.448-453
• /
• 2002

Remote sensing technology is one of the most powerful tools for human to know the nature and their living environment. However, before microwave remote sensing was developed and applied, remote sensing application was limited strongly by weather and time. Microwave remote sensing technology solves the problem. It makes us to have the capability to acquire information at all time of the day and under all weather condition, and make remote sensing technology be used in more wider area. Microwave remote sensing system include mainly Synthetic Aperture Radar (SAR), Microwave Radiometer, Microwave Scatterometer, and Altimeter (ALT). As SAR can acquire image whose spatial resolution is similar with visible and infrared image, it is paying much attention to and playing a more and more important role in earth observation. In recent year, the development of new SAR technology (multi-band and multi-polarization technology, InSAR technology, D-InSAR technology, and so on) makes SAR remote sensing go to an new stage, and its application area become more and more widely. The first Synthetic Aperture Radar (SAR) in the world appeared in 1960. After that, SAR and its application all developed very fast. Some radar satellites launched and run (include Seasat-A in 1978, ERS-1 in 1991, JERS-1 in 1992, Radarsat in 1995, and so on) promote SAR research and application in world greatly. China began to develop its SAR sensor and research SAR application in 1970s. After more than 30 years' research, it get some important development in sensor development data processing method, and application. Some operational systems have been used and play an important role. This paper will introduce the development of SAR technology and its application in China.

• Smart Media Journal
• /
• v.10 no.4
• /
• pp.9-14
• /
• 2021

In the case of the existing remote collaboration, the remote support service-oriented system is not suitable for the use of the field-oriented multi-person remote collaboration system. This paper is a remote collaboration system development for various industrial sites. We develop remote support and work management that faces the various needs of industrial sites, real-time video remote support between workers, and real-time voice work sharing between workers. In addition, The goal of the development aims to increase the usability by strengthening the security function through encryption in the video and to develop a more efficient system. Finally, the development contents are the remote management and the support software development, Android app development for worker, WebRTC-based remote collaboration system construction and development, and prototype development. These products are expected to increase demand and increase sales by installing and operating at industrial sites, and can promote manpower training, understanding trending technologies, and improving capabilities.