• 한국전기전자재료학회논문지
• /
• 제20권9호
• /
• pp.749-755
• /
• 2007

Recently, novel MEMS probe cards can support reliable wafer level chip test with high density probing capacity. However, manufacturing cost and process complexity are crucial weak points for low cost mass production. To overcome these limitations, we have developed micro spring structured MEMS probe card. For fabrication of micro spring module, a wire bonder and electrolytic polished gold wires are used. In this case, stringent tension force control is essential to guarantee the low level contact resistance of micro spring for reliable probing performance. For this, relation between tension force of fabricated probe card and contact resistance is characterized. Compare to conventional probe cards, developed MEMS probe card requires fewer fabrication steps and it can be manufactured with lower cost than other MEMS probe cards. Also, due to the small contact scratch patterns, we expect that it can be applied to bumping types chip test which require higher probing density.

• 한국소프트웨어감정평가학회 논문지
• /
• 제15권1호
• /
• pp.109-114
• /
• 2019

본 논문은 프로브 핀에 대한 S-파라미터 시뮬레이션과 특성 임피던스 시뮬레이션을 수행하였고 이를 통해 프로브 핀의 고주파 성능을 분석하였다. 프로브 핀은 중앙의 한 개의 신호 핀과 상하좌우의 네 개의 접지 핀으로 배치하였다. 프로브 핀 사이의 간격을 0.35 mm, 0.40 mm, 0.50 mm으로 증가시키면서 프로브 핀의 삽입손실과 반사손실을 계산하였다. 반사손실의 주기적인 공진 현상으로 인해 프로브 핀은 서로 다른 삽입손실 특성을 가진다. 또한 프로브 핀의 배치와 피치 변화에 따른 특성 임피던스 분석을 수행하였다. 동일한 피치에서 특성 임피던스가 50 Ω에 근접하는 접지 핀 개수가 있음을 확인하였다.

• 한국인터넷방송통신학회논문지
• /
• 제19권1호
• /
• pp.203-209
• /
• 2019

본 연구에서는 WENNER 4전극법 기반에 GMD(신규 대지 고유 저항 측정 장치)와 측정용 Probe(접지동봉)가 PLC(전력선 통신)로 연결된다. 측정용 Probe는 2개(P1,P2)가 1조로 모두 5조 10개의 Probe가 직렬로 각각 1m, 2m, 4m, 8m, 16m 간격으로 대지(토양)에 설치되어 있다. GMD에서 보낸 PLC 신호를 측정용 Probe 1조(P1)의 수신기가 감지하면 Probe에 부착된 PSD(전력 공급 장치)에서 측정용 미세 전압과 전류가 대지로 흐르게 되고 P1과 P2 사이의 토양을 거쳐 Probe 1조(P2)에 유입 된다. 이때 대지 저항으로 인해 전압 강하가 발생되는 원리로 저항값을 측정하게 된다. 이렇게 1~5조까지 T초 간격으로 대지 저항을 측정하고 측정된 데이터는 메인 장비에 탑재된 Arduino Server에 저장 한다. 저장된 측정 데이터는 옴의 법칙(Ohm's Law)에 의한 수식 R=E/I와 고유저항 ${\rho}=6.28aR$ (여기서, R: 측정저항, E: 측정전압, I: 측정전류, a:Probe 간격, ${\rho}$: 고유저항 )를 통해 고유저항을 얻을 수 있다. 실시간으로 얻어진 데이터를 Main PC에 설치된 CDGES 프로그램과 연동되어 데이터 분석이 가능하게 되고 대지(토양)의 접지 환경을 실시간 모니터링 할 수 있게 된다. 또한, 대지(토양)의 온도, 습도 등 계절의 특성을 파악하여 3D 그래프 지원으로 입체적인 Display가 가능하다. 연구의 한계점은 실험적으로 개발 운용한 모델로 상업적인 접근을 위해 Test Bed의 구체적인 적용 방안이 필요할 것이다.

• 한국수정란이식학회지
• /
• 제12권2호
• /
• pp.203-209
• /
• 1997

This study was carried out to compare the actual size(length and height) of ovaries, follicles and corpora lutea of Korean native cow with those on sonograms. We used 3 different probes(3.5 MHz abdominal probe, 6.5 MHz transvaginal probe and 5.0 MHz transrectal probe) and a calipher for measurements of ovaries, follicles and corpora lutea on sonograms and actual size. Under water immersion, 157 ovaries were scanned with 3 probes and measured in actual size and compared each other. The average height and width of ovaries of Korean native cows were 17.40$\pm$3.99 and 34.23$\pm$6.02mm, respectively. In comparison of height, length of ovaries and preovulation follicles, we found that image with a transvaginal probe was nearly the same as the actual size(p<0.01), but with an abdominal probe the image was appeared larger than the actual size. In measurement(diameter) of preovulation follicles the transvaginal probe was proven to be more accurate to the actual size than other probes and in corpus luteum measurement all probes were accurate. In the comparison of number of follicles by different size ranges, there was no statistical difference in the count of follicles over 10 mm in diameter between the transvaginal probe and naked eyes.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2011년도 제37회 추계학술대회논문집
• /
• pp.172-177
• /
• 2011

In order to investigate spray characteristics of gas-centered swirl coaxial injectors, a phase detection optical probe is employed to obtain the spatial evolution of the drop size and velocity. From the study on the optical probe responses under various impact angles, it is demonstrated that the drop size and velocity can be measured with an uncertainty less than 15% when the probe axis remains within about ${\pm}15^{\circ}$ of the drop velocity direction. This typical uncertainty is in good agreement with a previous study. It is also shown that the drop sizes measured by the optical probe are in accord with those evaluated by image processing techniques. Finally, the experiments with the optical probe are performed in dense sprays, as it were, in the near field of gas-centered swirl coaxial injectors. Some experimental results are presented and discussed to be of help to understanding of spray characteristics of the injectors.

• 한국압력기기공학회 논문집
• /
• 제7권4호
• /
• pp.19-25
• /
• 2011

Steam Generator(SG) tube is an important component of Nuclear Power Plant(NPP), which is the pressure boundary between the primary and secondary systems. The integrity of SG tube has been confirmed by the eddy current test every outage. The eddy current technique adopting bobbin probe is currently the primary technique for the steam generator tubing integrity assesment. The bobbin probe is one of the essential components which consist of the whole ECT examination system and provides us a decisive data for the evaluation of tube integrity. Until now, all of the ECT bobbin probes in Korea which is necessary to carry out inspection are imported from overseas. However, KHNP has recently developed the bobbin probe design technology and transferred it to domestic manufacturers to fabricate the probes. This study has been conducted to establish technical requirements applicable to the steam generator tube inspection using the bobbin probes fabricated by the domestic manufactures. The results have been compared with the results obtained by using foreign probe to identify the availability to the steam generator tube inspection. As a result, it is confirmed that the domestic bobbin probe is generally applicable to SG tube inspection in the NPPs.

• 열처리공학회지
• /
• 제16권4호
• /
• pp.216-223
• /
• 2003

In the production of internal combustion engines, there have been trends to develop the high performance engines with improved fuel efficiency, lighter weights and smaller sizes. This trends help to answer problems related to thermal load and abnormal combustion, etc. in these engines. In order to investigate these problems, a thin film-type probe and its manufacturing method for instantaneously measuring surface-temperatures have been proposed in this study, Instantaneous surface temperature of a constant volume combustion chamber was measured by this probe and heat flux was obtained by Fourier analysis. In order to thoroughly understand the characteristics of combustion, the authors measured the wall temperature of the combustion chamber and computed heat flux through a cylinder wall while varying the protrusion height of the probe have been measured. To achieve the above goals, a instantaneous temperature probe was developed, thereby making possible the analysis of the instantaneous temperature of wall surface and the detection of unsteady heat flux in the constant volume combustion chamber.

• 한국염색가공학회지
• /
• 제32권4호
• /
• pp.185-192
• /
• 2020

A novel binding site for metal ion made by designing molecule with tetrazolo quinoline with hydrazine carboxamide (TQC) and the designed molecule successfully synthesized. The probe works by selectively detecting Al3+ ion via both fluorimetric and colorimetric approach. The probe's effectiveness towards aluminium ion detection is highly sensitive and selective with no substantial interference with other competing ions. The added Al3+ ion to TQC fetched a rapid change of visual color to yellow from colorless, also the response of fluorescence turn-on. The fluorescence turn-on and color change visibly by the probe TQC with Al3+ ion credited to the ICT phenomenon (intramolecular charge-transfer transition). The likely interaction of the probe with aluminium ion has also been there predicted from ESI-MS spectral analysis results. The usefulness of the probe confirmed by practical utility by making a test kit to monitor Al3+ ion in water which showed a naked eye detection by notable color change.

• 한국정밀공학회지
• /
• 제22권11호
• /
• pp.173-181
• /
• 2005

We report on the design and fabrication of an electrostatic 2-axis MEMS stage possessing a platform with a size of $5{times}5mm^2$. The stage, as a key component, would be used in developing probe-based storage devices in the future. It was fabricated by forming numerous $5{\times}5{\mu}m^2$ etching holes in the central platform, as a result, reducing the total number of masks to 1, thereby simplifying the whole fabrication process. Experimental results show that the driving range of the stage was $32{\mu}m$ at the supplied voltage of 20V and the natural frequency was approximately 300Hz. The mechanical coupling between x- and y-motion was also measured and verified to be $25\%$.

• 대한의용생체공학회:학술대회논문집
• /
• 대한의용생체공학회 1998년도 추계학술대회
• /
• pp.76-77
• /
• 1998

In this paper, the authors have implemented a blood flow simulator and a blood flowmeter probe using self-mixing effect of the laser diode. The purpose of the blood simulator is to simulate microvascular blood flow in tissue. It consists of melinex film (thickness = $125{\mu}m$) which has similar optical characteristics to epidermis and porous polyethylene filter (Vyon, porosity 35%, mean pore size $50{\mu}m$, thickness=1 mm) which has similar optical characteristics to dermis. The blood flowmeter probe consists of laser diode(5 mW, 780 nm wavelength), CD lens(focal lenght 12 mm), current-to-voltage converter, highpass filter, and preamplifier. It doesn't need optical fiber, therefore, implementation of the probe is simpler than conventional probe using optical fiber.