• Title/Summary/Keyword: a priori

Search Result 767, Processing Time 0.029 seconds

Restoration of the Stream Runoff by the Physical Deterministic Modeling and Formulation of Water Balance for the Catchment of Byungchun River in Chungcheong Province in Korea (물리 결정 모델링에 의한 충청도 병천천 유역의 하천 유출량 복원과 물 수지 수립)

  • KIM, Man-Kyu
    • Journal of The Geomorphological Association of Korea
    • /
    • v.15 no.2
    • /
    • pp.37-53
    • /
    • 2008
  • This study has developed a water balance model for the catchment of Byungchun river using a BROOK90 4.4e physical deterministic water balance model with the long-term meterological data and stream run off data obtained from the basin of Byungchun river in Korea. It is intended that the validation model with calibrated model fitting parameter can build a long-term water balance plan for a period when meterological data are available but stream runoff data are not. Results of this study have satisfied the first expectation as an experiment for water balance modeling since measured stream runoff data have turned out to be very similar to simulated stream runoff data. Through the confirmation of model fitting parameters and validated simulation, water balance for the period of 1998 to 2006 has been restored. Unless the conditions of geomophology, vegetation, soil and land use change, meterological data alone can produce various hydrometeorological data related to stream runoff amount, soil water amount, and evapotranspiration. This study opens up a new horizon in restoring water balance in the past as well planning water balance in the present. The obtained results from this study are expected to be used in predicting future water balance in the wake of the changes in climate and vegetation in Korea.

On the Source Identification by Using the Sound Intensity Technique in the Radiated Acoustic Field from Complicated Vibro-acoustic Sources (음향 인텐시티 기법을 이용한 복잡한 진동-음향계의 방사 음장에 대한 음원 탐색에 관하여)

  • 강승천;이정권
    • The Journal of the Acoustical Society of Korea
    • /
    • v.21 no.8
    • /
    • pp.708-718
    • /
    • 2002
  • In this paper, the problems in identifying the noise sources by using the sound intensity technique are dealt with for the general radiated near-field from vibro-acoustic sources. For this purpose, a three-dimensional model structure resembling the engine room of a car or heavy equipment is considered. Similar to the practical situations, the model contains many mutually coherent and incoherent noise sources distributed on the complicated surfaces. The sources are located on the narrow, connected, reflecting planes constructed with rigid boxes, of which a small clearance exists between the whole box structure and the reflecting bottom. The acoustic boundary element method is employed to calculate the acoustic intensity at the near-field surfaces and interior spaces. The effects of relative source phases, frequencies, and locations are investigated, from which the results are illustrated by the contour map, vector plot, and energy streamlines. It is clearly observed that the application of sound intensity technique to the reactive or reverberant field, e.g., scanning over the upper engine room as is usually practiced, can yield the detection of fake sources. For the precise result for such a field, the field reactivity should be checked a priori and the proper effort should be directed to reduce or improve the reactivity of sound field.

Effects of Trade and Industrial Policies in the Presence of Strategic Technology Competition (전략적(戰略的) 기술경쟁(技術競爭)과 산업(産業)·무역정책(貿易政策))

  • Lee, Hong-gue
    • KDI Journal of Economic Policy
    • /
    • v.14 no.3
    • /
    • pp.3-21
    • /
    • 1992
  • By localizing the production of core parts and intermediate goods previously imported from Japan, Korean firms have been striving to increase their market share and profit in the final goods market in which Japanese firms are dominating. Korean producers' efforts, however, have often been thwarted by Japanese suppliers' "strategic" behavior. This competitive strategy involves Japanese exporters supplying parts and intermediate goods at very high prices until Korean firms must locally develop them, and then setting the prices far below the previous level so that the profitability of localization is dramatically reduced, or even means a loss for the Korean manufacturer. This paper intends to explain the strategic behavior of Japanese firms through the concepts of strategic interactions and joint economies. Strategic interactions can be aggressive or accommodating depending on whether competitors are dealing with strategic substitutes or complements. Joint economies exist in multi-stage competition when competition in the previous state favorably influences "profits" of the ensuing stage. Competiton between Korean and Japanese firms (a two-stage game involving production and technology rivalries) can be characterized by joint economies and strategic substitutes: joint economies since technological improvement results in more profits in the production stage; and strategic substitutes since an increase in marginal profits of one firm brings about a decrease in marginal profits of the other in a duopolitic production stage. This implies that the flood of "low price" Japense substitutes is an almost "natural" phenomenon in the context of the duopolistic market described in this paper. In the technology competition stage, on the other hand, technology development and technology transfer can be either strategic complements or substitutes. This implies that, in typical comparative static analyses, the effect of changes in exogenous variables cannot be expected a priori. Thus it becomes very difficult to determine the desirability of applying various policy measures such as countervailing duties, R&D subsidies, and creating demand for localized products. For these reasons, it is indeed likely that the measures suggested as means of circumventing the strategic behavior of Japanese firms (and enhancing technological development of Korean firms) may not work.

  • PDF

Review on the Three-Dimensional Inversion of Magnetotelluric Date (MT 자료의 3차원 역산 개관)

  • Kim Hee Joon;Nam Myung Jin;Han Nuree;Choi Jihyang;Lee Tae Jong;Song Yoonho;Suh Jung Hee
    • Geophysics and Geophysical Exploration
    • /
    • v.7 no.3
    • /
    • pp.207-212
    • /
    • 2004
  • This article reviews recent developments in three-dimensional (3-D) magntotelluric (MT) imaging. The inversion of MT data is fundamentally ill-posed, and therefore the resultant solution is non-unique. A regularizing scheme must be involved to reduce the non-uniqueness while retaining certain a priori information in the solution. The standard approach to nonlinear inversion in geophysis has been the Gauss-Newton method, which solves a sequence of linearized inverse problems. When running to convergence, the algorithm minimizes an objective function over the space of models and in the sense produces an optimal solution of the inverse problem. The general usefulness of iterative, linearized inversion algorithms, however is greatly limited in 3-D MT applications by the requirement of computing the Jacobian(partial derivative, sensitivity) matrix of the forward problem. The difficulty may be relaxed using conjugate gradients(CG) methods. A linear CG technique is used to solve each step of Gauss-Newton iterations incompletely, while the method of nonlinear CG is applied directly to the minimization of the objective function. These CG techniques replace computation of jacobian matrix and solution of a large linear system with computations equivalent to only three forward problems per inversion iteration. Consequently, the algorithms are efficient in computational speed and memory requirement, making 3-D inversion feasible.

A Polynomial Time Algorithm for Vertex Coloring Problem (정점 색칠 문제의 다항시간 알고리즘)

  • Lee, Sang-Un;Choi, Myeong-Bok
    • Journal of the Korea Society of Computer and Information
    • /
    • v.16 no.7
    • /
    • pp.85-93
    • /
    • 2011
  • The Vertex Coloring Problem hasn't been solved in polynomial time, so this problem has been known as NP-complete. This paper suggests linear time algorithm for Vertex Coloring Problem (VCP). The proposed algorithm is based on assumption that we can't know a priori the minimum chromatic number ${\chi}(G)$=k for graph G=(V,E) This algorithm divides Vertices V of graph into two parts as independent sets $\overline{C}$ and cover set C, then assigns the color to $\overline{C}$. The element of independent sets $\overline{C}$ is a vertex ${\upsilon}$ that has minimum degree ${\delta}(G)$ and the elements of cover set C are the vertices ${\upsilon}$ that is adjacent to ${\upsilon}$. The reduced graph is divided into independent sets $\overline{C}$ and cover set C again until no edge is in a cover set C. As a result of experiments, this algorithm finds the ${\chi}(G)$=k perfectly for 26 Graphs that shows the number of selecting ${\upsilon}$ is less than the number of vertices n.

A Case Study on The Data Processing and Interpretation of Aeromagnetic Survey Conducted in The Low Latitude Area: Stung Treng, Cambodia (저위도 캄보디아 스퉁트렝 지역의 항공자력탐사 자료처리 및 해석)

  • Shin, Eun-Ju;Ko, Kwang-Beom;You, Young-June;Jung, Yeon-Ho
    • Geophysics and Geophysical Exploration
    • /
    • v.15 no.3
    • /
    • pp.136-143
    • /
    • 2012
  • In this case study, we present the various and consistent processing techniques for the reasonable interpretation of aeromagnetic data. In the processing stage, we especially focused on the three major respects. First, in the low latitude area, severe artifacts are occurred as a result of reduction to the pole technique. To overcome this problem, variable alternative methods were investigated. From the comparison of each technique, we concluded that energy balancing method gives more fruitful result. Second, because of limited a priori information, it is nearly impossible to employ detailed geological survey due to wide and thick spreading of soils in the survey area. So we especially investigated the new techniques such as extracting slope, curvature and aspect information mainly used in GIS field as well as conventional methods. Finally, by using the Euler deconvolution, we extracted the depth information on the magnetic anomalous body. From the synthetic analysis between depth information and previous discussed results, the detailed future survey area was proposed. We think that a series of processing techniques discussed in this study may perform an important role in the domestic and abroad resource development project as a useful guideline.

A Comparative Study of Sartre's imagination theory and Dufrenne's aesthetic theory on a Concept of 'analogon' (사르트르의 상상력 이론과 뒤프렌의 미학 이론의 접점 - 아날로공 개념을 중심으로)

  • Ji, Young-Rae
    • Korean Association for Visual Culture
    • /
    • v.35
    • /
    • pp.5-33
    • /
    • 2019
  • This paper examines the problems of the concept of 'analogon' which occupies an important place in Jean-Paul Sartre's theory of imagination and his 'aesthetic of the unreal', focusing on Michel Dufrenne's objection to the concept. In the Imaginary (1940), Sartre offers a phenomenological account of the imaginative experience and his theory of imagination provides the basis for his account of experience of art. Sartre distinguishes the imagining consciousness from the realizing consciousness of perception. The work of art, for Sartre, is transformed into an irreal thing ("The work of art is irreality."), i.e. it appears only as aesthetic object, and only under the condition that the spectator's consciousness changes into an imagining consciousness. Some claim that Sartre underemphasizes the function of materiality in artworks. Mikel Dufrenne, in his The Phenomenology of Aesthetic Experience (1953), criticizes Sartre's thesis of irreality. Dufrenne argues that the aesthetic object is the work of art accomplished by aesthetic perception, the meaning of the aesthetic object is given as a whole in the sensuous and does not refer to something that lies outside the object as with imagination or irreality. An affective a priori is the condition of possibility for the occurrence of aesthetic experience.

Suggesting "Activity Inherent Value" for Earth Science Education: Estimating the Size of the Earth by Eratosthenes (지구과학교육을 위한 "활동적 고유한 가치" 제안 : Eratosthenes 지구 크기 측정을 중심으로)

  • Jun-Young Oh;Yu-Mi Lee
    • Journal of the Korean Society of Earth Science Education
    • /
    • v.17 no.2
    • /
    • pp.102-122
    • /
    • 2024
  • The aim of the study is to explore how to approach the inherent value of nature, which is the main object of earth science education, beyond its instrumental value, which is its external usefulness. Above all, it is said to be an activity-based inherent value in the entire transfer process of the experiment, which includes psychological elements. At the core of environmental ethics is value and the utilitarian question of what is worth continuing. It is a matter of more than simply continuation. The answer is the sustainable value of the natural environment, an education that must preserve its beauty as an inherent value, that is, as a heritage value as a lover of life. Furthermore, the area of valuation must be upgraded from synchronic to diachronic ethical values, with sustainable values instead of intrinsic values. In environmental ethics, the intrinsic value that shows the beauty of knowledge itself is called bequest value. The study distinguished between a priori intrinsic value that ignores existing experience and intrinsic value that is experience-oriented and activity-oriented. In addition, the intrinsic value principle centered on activities was explored through scientific experiments in earth science education and Eratosthenes's earth size measurement experiment. The value principle according to the scientific worldview serves as the basis for value judgment. Above all, intrinsic value was being revealed through the active value experience of the experiment, in which aesthetic values were involved in the process of inferring the experiment results. As an educational implication, it should be value-education that helps us internally transfer intrinsic values rather than instrumental values, which are the basis for creating a sustainable society and nature.

Analysis of fMRI Signal Using Independent Component Analysis (Independent Component Analysis를 이용한 fMRI신호 분석)

  • 문찬홍;나동규;박현욱;유재욱;이은정;변홍식
    • Investigative Magnetic Resonance Imaging
    • /
    • v.3 no.2
    • /
    • pp.188-195
    • /
    • 1999
  • The fMRI signals are composed of many various signals. It is very difficult to find the accurate parameter for the model of fMRI signal containing only neural activity, though we may estimating the signal patterns by the modeling of several signal components. Besides the nose by the physiologic motion, the motion of object and noise of MR instruments make it more difficult to analyze signals of fMRI. Therefore, it is not easy to select an accurate reference data that can accurately reflect neural activity, and the method of an analysis of various signal patterns containing the information of neural activity is an issue of the post-processing methods for fMRI. In the present study, fMRI data was analyzed with the Independent Component Analysis(ICA) method that doesn't need a priori-knowledge or reference data. ICA can be more effective over the analytic method using cross-correlation analysis and can separate the signal patterns of the signals with delayed response or motion related components. The Principal component Analysis (PCA) threshold, wavelet spatial filtering and analysis of a part of whole images can be used for the reduction of the freedom of data before ICA analysis, and these preceding analyses may be useful for a more effective analysis. As a result, ICA method will be effective for the degree of freedom of the data.

  • PDF

Blind Adaptive Equalization of Partial Response Channels (부분 응답 채널에서의 블라인드 적응 등화 기술에 관한 연구)

  • 이상경;이재천
    • The Journal of Korean Institute of Communications and Information Sciences
    • /
    • v.26 no.11A
    • /
    • pp.1827-1840
    • /
    • 2001
  • In digital data transmission/storage systems, the compensation for channel distortion is conducted normally using a training sequence that is known a priori to both the sender and receiver. The use of the training sequences results in inefficient utilization of channel bandwidth. Sometimes, it is also impossible to send training sequences such as in the burst-mode communication. As such, a great deal of attention has been given to the approach requiring no training sequences, which has been called the blind equalization technique. On the other hand, to utilize the limited bandwidth effectively, the concept of partial response (PR) signaling has widely been adopted in both the high-speed transmission and high-density recording/playback systems such as digital microwave, digital subscriber loops, hard disk drives, digital VCRs and digital versatile recordable disks and so on. This paper is concerned with blind adaptive equalization of partial response channels whose transfer function zeros are located on the unit circle, thereby causing some problems in performance. Specifically we study how the problems of blind channel equalization associated with the PR channels can be improved. In doing so, we first discuss the existing methods and then propose new structures for blind PR channel equalization. Our structures have been extensively tested by computer simulation and found out to be encouraging in performance. The results seem very promising as well in terms of the implementation complexity compared to the previous approach reported in literature.

  • PDF