• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.13 no.7
• /
• pp.625-632
• /
• 2002

In this paper, a wide band modified inverted-F type antenna printed on a high dielectric ceramic material is designed and fabricated. This antenna is designed to have optimum antenna characteristics analyzing the effects of design parameters such as printed antenna pattern, ceramic dielectric material dimension and dielectric constant on antenna characteristics using the commercial simulation tool HFSS. The fabricated antenna's width, length and height are 8 mm, 8 mm and 3 mm, respectively. Measurement results show that it has -10 dB bandwidth of 270 MHz which satisfies the IMT-2000 bandwidth required for handset and that its maximum radiation gain is 2 dBi.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2005.09a
• /
• pp.193-197
• /
• 2005

This paper presents a method by which multiple holes of ultra small size can be punched simultaneously. Silicon wafers were used to fabricate punching die. Workpiece used in the present investigation were the rolled pure copper of $3{\mu}m$ in thickness and CP titanium of $1.5{\mu}m$ in thickness. The metal foils were punched with the dies and arrays of circular and rectangular holes were made. The diameter of holes ranges from $2-10{\mu}m$. The process set-up is similar to that of the flexible rubber pad forming or Guerin process. Arrays of holes were punched successfully in one step forming. The punched holes were examined in terms of their dimensions, surface qualities, and potential defect. The effects of the die hole dimension on ultra small size hole formation of the thin foil were discussed. The optimum process condition such as proper die shape and diameter-thickness ratio (d/t) were also discussed. The results in this paper show that the present method can be successfully applied to the fabrication of ultra small size hole array in a one step operation.

• Journal of the Korean Solar Energy Society
• /
• v.21 no.4
• /
• pp.29-35
• /
• 2001

The chemical heat storage as the one way of utilization for high temperature solar energy was considered. The stram reforming reaction of methane was chosen for endothermic reaction. The reactor was made of stainless steel tube and it's dimension was 0.635 cm I.D. and 30 cm long, coiled tube because of the geometry requirement of solar receiver The effects of space velocity and reactants mole ratio on the methane conversion and CO selectivity were examined. From the experimental results, the optimum steam/methane mole ratio was determined.

• Journal of Advanced Marine Engineering and Technology
• /
• v.34 no.2
• /
• pp.289-295
• /
• 2010

Injection molding process is one of the most important methods to produce plastic parts with high efficiency and low cost. Today, injection molded parts have been increased dramatically the demand for high strength and quality applications. In this study, In-line skates are made of Al alloy and plastic materials to replace the frame for the optimization process is all about. I interpreted through mold design, Injection molding process that minimizes the runner and the gate dimension will determine the size and shape. Runner and gate dimensions of change based on availability of the product, I'll discuss the injection molding. This report investigates that the optimum injection molding condition for minimum of shrinkage. The FEM Simulation CAE tool, Moldflow, is used for the analysis of injection molding process.

• Journal of the Korean Solar Energy Society
• /
• v.25 no.4
• /
• pp.13-19
• /
• 2005

The reaction of steam reforming of methane with commercial catalysts was conducted for thermochemical heat storage. The reaction conditions were investigated for temperature range of 700 to $900\;^{\circ}C$ and steam to carbon mole ratios between 3.0 and 5.0. The reactor was made of stainless steel and it's dimension was 12 cm inside diameter and 6cm long. The effects of space velocity and reactants mole ratio and temperature on the methane conversion and CO selectivity were examined. Optimum reaction condition was determined. There was not a significant difference of methane conversion and CO selectivity compared to conventional reactor.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.27 no.8A
• /
• pp.829-835
• /
• 2002

When finite length image signal is decomposed into M-band synthesized using M-band orthogonal wavelet transform, the boundary signal of image are not reconstructed perfectly. for boundary signals to be reconstructed perfectly, different type filter bank or technique is applied to them when the dimension of analysed is proposed. It can be designed using the singular value decomposition of boundary perfect reconstruction matrix which is obtained from paraunitary matrix which is obtained from paraunitary matrix. And it is also discussed to design the boundary filter bank for improving the coding performance when it is applied to subband coder. The proposed boundary filter bank shows 7% gains in PSNR compared with reflected method.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.33 no.3
• /
• pp.159-165
• /
• 1997

This paper presents the optimum dimension of 89 ton class stow-net vessel with stern-fishing. The model of basic design is developed by using the optimization techniques referring to objective function and numerous constraints as follows; speed, fishing quantity, fishing days, catch per unit effort(CPUE), and weight/ratio of main dimensions, etc. Thus, the basic design of stow-net fishing vessel is built up by using the optimization of the design variables called the economic optimization criteria, and the objective function represents the criterion which is cost benefit ratio(CBR). The main conclusions are as follows. 1. S/W for decision of optimum hull size is developed in 89 ton class stow-net fishing vessel which is constructed with optimization of the design variables called the economic optimization criteria. 2. For optimum ship dimensions in 89 ton class stow-net fishing vessel, the hull dimensions can be obtained in the range of L= 27.3m, B = 6.6m, D = 2.80m, Cb = 0.695, T/D = 0.80, $\Delta$(displacement)=281.7ton with 10 knots.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.7
• /
• pp.4057-4064
• /
• 2014

In this paper, attempts were made to design a preform for a final punch inexpensively using the proposed approximate optimization method or metamodel-based simulation optimization. The design objective of this work is to achieve a uniform distribution of effective strains, the angle dimension of the preformed punch is chosen as a design variable, and maximum underfill ratio is used as a constraint. For this optimization, a computer simulation of a practical punch forging process is run using DEFORM software, in which a preformed punch(workpiece), a master punch(upper die), and a bottom die are dealt with. A validation method is introduced to determine if the simulation results match the actual forging process. In addition, this work presents the detailed design optimization procedure consisting of (i) generation of an initial metamodel, (ii) metamodel optimization, (iii) validation of metamodel-predicted optimum, and (iv) metamodel improvement.

• Journal of the Korean Graphic Arts Communication Society
• /
• v.31 no.1
• /
• pp.39-49
• /
• 2013

Nowadays the printing market has shift from 2D(two dimension) industry to 3D(three dimension) industry, along with IT. With rapidly changing market, it's true that the effort to develop the printing materials and upgrade the printing qualities is produced actively in the country. Particularly, the differences in printing materials can often determine the quality of printings in the printability. In the case of the printability of offset, 9 items(paper, ink, order of printing, ink supply, blowing-up halftone, grey balance, key color(base color), overlap efficiency, quality at the halftone dot reproduction etc.) are usually considered as the important factors and used to estimate the printability at abroad. However, in domestic, ink-jet paper is not used for the printing/publishing by ink-jet printing for digital, but done mainly for offset printing. Because the paper of gloss coated type, which is the ink-jet paper, has high price, it's too hard to manufacture massively printing/publishing. Also, in the case of the paper of uncoated type, in spite of its reasonable price rather than the former, the type of uncoated one also has demerit that the ink-jet paper has a clear difference between the front and the back. Therefore, it's tough reality that Ink Jet paper is hardly taken advantage of as the printing/publishing. Thus, what is done in the first to print and/or publish on ink-jet paper is that the front and the back must be printed evenly, and appropriate to the printability of ink-jet. Although there're some kinds of ink-jet paper in the country, it has not been produced in true domestic production yet. In addition, thanks to the brightness of fluorescence brightening agent, the foreign product can offer the good-qualified one-time printing. But when it comes to the printing/publishing, there're difficulties that it may cause the Ocular Fatigue because of long-term exposure of the eyes to text. This research tries to find out the optimum ink-jet paper in domestic for the printing/publishing by studying on the printability of ink-jet on digital web-printing. And it also tries to look for the paper's brightness which can be reduce the possibility to cause the consumers' Ocular Fatigue.

• Journal of IKEEE
• /
• v.13 no.2
• /
• pp.194-199
• /
• 2009

In this study, ultra high-voltage (170kV AC), reliable 80pF mica capacitors for partial discharge system application were investigated. For capacitors design, Program was developed to sampling of series and parallel parameters. Mica was used as the dielectric of the capacitors. Using the conservative design rule, over 3 individual 50$\mu$m thick mica sheets with a size of 30mm$\times$35mm were used with lead foils to form a parallel capacitor element and 20 mica sheets were interleaved with lead foils to form a series stack of parallel capacitor element to meet the requirements of the capacitors. The dimension of the fabricated 80pF capacitor for 17kV AC were 90mm$\times$90mm. The high-frequency characteristics of the capacitance (C) and dissipation factor (D) of the developed capacitors were measured using a capacitance meter. The developed capacitor exhibited C of 79.5pF, had D of 0.001% over the frequency ranges of 150kHz to 50MHz, had a self-resonant frequency of 65MHz.