• Composites Research
• /
• v.14 no.3
• /
• pp.10-17
• /
• 2001

A reseach was peformed to develop composite pressure vessels in conjunction with design, fabrication, and test. Fiber pattern and angels were decided by CADFIL software and they were [$liner/15^{\circ}/15^{\circ}/90^{\circ}/18^{\circ}/90^{\circ}/21^{\circ}/21^{\circ}/90^{\circ}$]. Fabrication of bottles were done by 5-axis filament winding machine. During fabrication fiber optic sensors were embedded to measure the strain at points when internal pressure was applied by water pump. Conventional strain gage instrumentation showed the stable test results. The test results were compared to finite element analysis results and they were close each other in strain values. One can see the successful design and fabrication of single boss composite vessels.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.33 no.5
• /
• pp.459-464
• /
• 2013

Structures can be evaluated their health status by allowable loading criteria. These criteria can be determined by the maximum strain. Therefore, in order to detect this maximum strain of structures, fiber optic Bragg grating(FBG) sensor probes are newly designed and fabricated to perform the memorizing detection even if the sensor system is on-and-off. The probe is constructed with an FBG optical fiber embedded in silver epoxy. When the load is applied and removed on the structure, the residual strain remains in the silver epoxy to memorize the maximum strain effect. In this study, a commercial Al-foil bonded FBG sensor probe was tested to investigate the detection feasibility at first. FBG sensor probes with silver epoxy were fabricated as three different sizes. The detection feasibility of maximum strain was studied by doing the tensile tests of CFRP specimens bonded with these FBG sensor probes. It was investigated the sensitivity coefficient defined as the maximum strain divided by the residual strain. The highest sensitivity was 0.078 of the thin probe having the thickness of 2 mm.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.12
• /
• pp.287-291
• /
• 2013

The low- frequency hydrophone sensor, using the recently developed FBG has an excellent merits which the existing fiber-optic sensor has and also it has an excellent signal sensing effect in the environment of low-frequency(30Hz-300Hz), not to be detected by the PZT sensor. we have the detection of frequency 19KHz right signals when was using more Hopper lenz WDM than $1{\times}3$ optical coupler. furthermore, we can expect the uitilization of low-frequency signal detection to be used for the military purpose and also it can be developed as the high-sensibility multiplexing through the sensor array system.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2009.04a
• /
• pp.320-325
• /
• 2009

In this study, a method to estimate the suspension bridge deflection is developed using mode decomposition technique. In order to examine the suspension bridge stability against these dynamic loadings, the prediction of displacement response is very important to evaluate bridge stability. However, it is recognized that any measurement of movement for suspension bridges may be difficult for the absence of proper methods to measure the displacement response on site. This study aims at suggesting a method to estimate the displacement response from the measured strain signals in an indirect way to predict the displacement response, not a direct way to measure the displacement response. Additionally, by applying the FBG sensors with multi-point measurements not influenced by electric noise, it can be expected that the technique would be applicable to infrastructures.

• Proceedings of the KIEE Conference
• /
• 2007.04a
• /
• pp.319-321
• /
• 2007

This paper introduces a general overview of the 6000m class deep-sea ROV. Hemire and Henuvy. and then describes its motion control system. It is developed by Korea Ocean Research & Development Institute(KORDI) for 6 years since 2001. sponsored by the Ministry of Maritime Affairs and, Fisheries (MOMAF). Hemire is remotely operated by a fiber optic telemetry. where 6 thrusters are controlled by operator in manual mode and by auto depth control and auto heading control in auto mode. In this paper. operational mechanism of manual and automatic mode with some convenient functions for operator is desc.ribed. Finally, results of sea trial conducted at the Philippine sea where a depth is 5.770m are shown.

• Journal of Dental Anesthesia and Pain Medicine
• /
• v.19 no.5
• /
• pp.307-312
• /
• 2019

Klippel-Feil syndrome is characterized by congenital fusion of two or more cervical vertebrae, a low hair line at the back of the head, restricted neck mobility, and other congenital anomalies. We report a 16-year-old young man with Klippel-Feil syndrome, Sprengel deformity of the right scapula, thoracic kyphoscoliosis, and mandibular prognathism with an anterior open bite. He was treated with orthodontic treatment and maxillofacial surgery. An anticipated difficult airway due to a short neck with restricted neck movements and extrinsic restrictive lung disease due to severe thoracic kyphoscoliosis increased his anesthesia risk. Due to his deviated nasal septum and contralateral inferior turbinate hypertrophy, we chose awake fiber optic orotracheal intubation followed by submental intubation. Considering the cervical vertebral fusion, he was carefully positioned during surgery to avoid potential spinal injury. He recovered well and his postoperative course was uneventful.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2006.05a
• /
• pp.1002-1006
• /
• 2006

Temperature monitoring techniques per depth have been recognized as important information in the reservoir environmental issues. However, old measurement method by single temperature sensor and cable type has demerits not only for its limited measuring location but for its inconvenience of users. In this study, multi-channel temperature monitoring system was introduced and executed experiment for actual application feasibility evaluation. Both type of new techniques such as multi-channel addressable built-in temperature sensor and fiber optic multi sensor were tested in Daechung and Imha reservoir. As a result, it was proved that these kinds of temperature monitoring skills had very good performance and availability for a output of spatial, simultaneous thermal distribution focused on the user's convenience. And these measuring method and thermal data will be useful for providing basic information in a water resources investigation like reservoir stratification and environmental problems.

• Structural Monitoring and Maintenance
• /
• v.1 no.4
• /
• pp.411-425
• /
• 2014

A relatively low frequency Lamb wave-based damage identification method called damage imaging method for rectangular composite plate is presented. A damage index (DI) is generated from the delay matrix of the Lamb wave response signals, and it is used to indicate the location and approximate area of the damage. The viability of this method is demonstrated by analyzing the numerical and experimental Lamb wave response signals from rectangular composite plates. The technique only requires the response signals from the plate after damage, and it is capable of performing near real time damage identification. This study sheds some light on the application of Lamb wave-based damage detection algorithm for plate-type structures by using the relatively low frequency (e.g., in the neighborhood of 100 kHz, more suitable for the best capability of the existing fiber optic sensor interrogator system with the sampling frequency of 500 kHz) Lamb wave response and a reference-free damage detection technique.

• Korean Journal of Optics and Photonics
• /
• v.12 no.1
• /
• pp.10-16
• /
• 2001

A new digital serrodyne (DS) signal processor for the close-loop fiber optic gyroscope was designed and implemented. It is based on a new algorithm that can solve the remaining problems of the existing digital serrodyne processing by utilizing a new modulation wavefonn. The algorithm was implemented in an FPGA and tested. Theoretical limit and experimental value of the random walk were measured to be 2.6 and 3.3 deg/hr/$\sqrt{Hz}$, respectively. And drift of the processor is smaller than that by Shupe's effect.effect.

• Journal of the Optical Society of Korea
• /
• v.11 no.1
• /
• pp.1-5
• /
• 2007

We investigate the efficiency of an optical intensity modulator based on an electrically tunable $LiNbO_3$ reflection grating. Assuming a grating coupling coefficient and the waveguide propagation loss, waveguide length is varied to find its effect on the modulator slope efficiency and the device capacitance. With the low propagation loss of the $LiNbO_3$ waveguide, a very efficient optical intensity modulator can be achieved for a low frequency (${\sim}1GHz$) as long as the requirement for the grating coupling coefficient is satisfied.