• Journal of Power Electronics
• /
• 제18권5호
• /
• pp.1398-1408
• /
• 2018

In order to further improve the steady-state control performance of model predictive torque control (MPTC), a double-vector-based model predictive torque control without a weighting factor is proposed in this paper. The extended voltage vectors synthesized by two basic voltage vectors are used to increase the number of feasible voltage vectors. Therefore, the control precision of the torque and the stator flux along with the steady-state performance can be improved. To avoid testing all of the feasible voltage vectors, the solution of deadbeat torque control is calculated to predict the reference voltage vector. Thus, the candidate voltage vectors, which need to be evaluated by a cost function, can be reduced based on the sector position of the predicted reference voltage vector. Furthermore, a cost function, which only includes a reference voltage tracking error, is designed to eliminate the weighting factor. Moreover, two voltage vectors are applied during one control period, and their durations are calculated based on the principle of reference voltage tracking error minimization. Finally, the proposed method is tested by simulations and experiments.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1994년도 Proceedings of the Korea Automatic Control Conference, 9th (KACC) ; Taejeon, Korea; 17-20 Oct. 1994
• /
• pp.548-552
• /
• 1994

The robust compensation controller, which has been proposed by one of the authors and is based on the fundamental principle of making the plant follow the reference model, consists of the reference model and the robust compensator. The reference model is constructed by using the nominal model of the plant and determines the input-output properties of the resultant system. The robust compensator is obtained as a solution of the mixed sensitivity problem in H infinity control theory. Therefore the resultant system is of low sensitivity and robust stability. In the case where uncertainty does not occur in the plant, the plant follows perfectly the reference model. Therefore, in the case where uncertainty occurs in the plant, we propose the system configuration which improves the following accuracy without replacing the 개bust compensator but by identifying, the plant and reconstructing the reference model.

• 한국정보통신학회논문지
• /
• 제16권12호
• /
• pp.2708-2715
• /
• 2012

본 논문은 모델기준적응제어 및 직접토크제어 방식을 이용한 새로운 유도전동기의 센서리스 속도제어 방법을 제안한다. 모델기준적응제어는 기준모델과 조정모델을 설정하고 이들의 출력을 비교하여 조정모델 및 제어를 위한 속도 추정값을 얻는 제어법이다. 그리고 직접토크제어는 토크와 자속을 독립적으로 제어하는 방법으로 토크, 자속 지령치와 전동기 고정자 전압, 전류 값을 이용해 추정한 토크, 자속을 비교하여 히스테리시스 밴드를 거쳐 그 오차를 가장 최소화하기 위한 전압벡터를 선정하여 출력하는 방법이다. 본 논문에서는 제안한 방식의 이론적인 배경 및 타당성에 대해 기술하였으며 모의실험을 통해 제안된 방식의 우수성을 검증하였다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1995년도 추계학술대회 논문집
• /
• pp.864-867
• /
• 1995

Presented in the paper is a structured approach to modeling automated manufacturing system (AMS) in the form of an event graph. The proposed two-phase procedure for formal modeling is 1) reference modeling by schematic supervisory control modeling and 2) event graph transformation from supervisory control model. Also described is a formal model for a small-sized FMS in the form of an event graph.

• 한국정밀공학회지
• /
• 제20권4호
• /
• pp.84-91
• /
• 2003

The paper presents a power control algorithm for a full pitch-controlled wind power system. The design of a pitch controller, in general, is performed by linearizing the torque in the vicinity of a operating point assuming the tip speed ratio is constant. For power control, however, the tip speed ratio is no longer a constant. In this study, a reference pitch model is derived in terms of a wind speed, angular velocity, and pitch angle. The reference pitch model is used to design a controller without linearizing the non-linear torque model of the blade. The validity of the algorithm is demonstrated with the results produced through sets of simulation.

• Journal of Power Electronics
• /
• 제14권3호
• /
• pp.549-563
• /
• 2014

In this paper, the speed regulation problem of permanent synchronous motor (PMSM) systems under the vector control framework is studied. A model reference adaptive controller (MRAC) based on the Lyapunov stability theory is first designed. Since the standard MRAC method provides poor disturbance rejection performance in the case of strong disturbances, a composite control method which combines the MRAC method and the disturbance estimation method, called the MRAC+ESO method, is proposed. An extended state observer (ESO) is introduced to estimate the lumped disturbances. The obtained estimated value acts as a feedforward compensation term to the MRAC controller. A stability analysis of the composite control method is given. Simulation and experimental results are presented and compared to show the effectiveness of the proposed control method.

• 대한전자공학회논문지
• /
• 제25권12호
• /
• pp.1618-1624
• /
• 1988

In this paper, a robust discrete model reference adaptive controller is proposed using a generalized model reference adaptive algorithm for single-input single-output discrete systems. A signal dependent time-varying dead-zone is employed in a generalized adaptive control structure. This adaptive controller is shown to assure the boundedness of the signals of the system even in the presence of bounded external disturbance.

• International Journal of Control, Automation, and Systems
• /
• 제6권3호
• /
• pp.327-338
• /
• 2008

A fault tolerant control system design technique has been proposed and analyzed for managing performance degradation in the presence of multiple faults in actuators. The method is based on a control structure with a model reference reconfigurable control design in an inner loop and command input adjustment in an outer loop. The reduced dynamic performance requirements in the presence of different actuator faults are accounted for through different performance reduced (degraded) reference models. The degraded steady-state performances are governed by the reduced levels of command input. The reconfigurable controller is designed on-line automatically in an explicit model reference control framework so that the dynamics of the closed-loop system follow that of the performance reduced reference model under each fault condition. The reduced command input level is determined to prevent potential actuator saturation. The proposed method has been evaluated and analyzed using an aircraft example against actuator faults subject to constraints on the magnitude and slew-rate of actuators.

• 대한기계학회논문집B
• /
• 제40권8호
• /
• pp.535-542
• /
• 2016

본 연구에서는 차량용 슈퍼차져의 원심압축기 출구 공기 유량을 제어하기 위한 모델 기반 적응 제어기를 설계하였다. 원심압축기 모델은 운전 동특성을 확인할 수 있는 해석적 기반으로 개발하였으며, 개발된 모델은 실험과의 검증을 통해 타당성을 확인하였다. 모델 기반 적응제어는 압축기 모델과 적응 제어기로 구성되었다. 피드백 제어는 시스템 파라미터의 변화에 견실 제어가 가능하지 않지만, 적용된 적응 제어는 시스템 파라미터의 변화에 견실 제어가 가능하다. 결론적으로, 모델 기반 제어는 제어 요구 유량에 제어가 이루어지며, 또한 시스템 파라미터가 변화해도 피드백 제어에 비해 견실한 제어가 이루어지는 것을 확인할 수 있다.

• International Journal of Automotive Technology
• /
• 제8권4호
• /
• pp.477-481
• /
• 2007

In this article we present a new, reference model based, unified strategy for engine control. Three main modes are considered: first is the driver control mode where the driver controls the engine via the pedal position; second is the dashpot mode, that is, when the driver takes his foot off the pedal; and, lastly is the idle speed control mode. These modes are unified so that seamless transitions between modes now becomes possible. The unification is achieved due to the introduction of a reference model for the engine speed whereby only the desired engine speed is different for different modes while the structure of the control system remains the same for all the modes. The scheme includes an observer that estimates unknown engine load torque. A proof of robustness with respect to unknown load disturbances both within the operating modes and during intermode transitions is given.