• Archives of Plastic Surgery
• /
• 제33권1호
• /
• pp.80-86
• /
• 2006

The challenge of accurately predicting eyelid height after blepharoptosis surgery is well-known problem even in complete hands. From May 1988 to December 2004, authors reviewed 182 cases(240 eyes) of blepharoptosis corrected by frontalis muscle transfer or levator resection and had experienced 10 cases(15 eyelids) of early reoperation around the first week. The period from initial operation to reoperation are between six to eight days and mean period is seven days. Initial operative procedures were frontalis muscle transfer in 3 cases(4 eyelids) and levator resection in 7 cases(11 eyelids). Follow up period ranged from 6 months to 16 years. Early adjusting surgery was performed in accordance with the preoperative and postoperative degree of ptosis of patient and by previous operative technique. The results are evaluated according to the criteria of an ideal correction by Souther and Jordan. Seven patients have good or satisfactory results(less than 1 mm asymmetry, good in 5 cases and satisfactory in 2 cases). Three patients(5 eyelids) recorded as poor results(more than 2 mm asymmetry). Even if early or late reoperation can be effective in correcting unsatisfactory results after correction of blepharoptosis, early reoperation may lead to better results than late reoperation because early reoperation can offer a reduction in time to final result, the ease with which it is performed and potential cost savings. The experience of surgeon is also important factor for the treat ment of recurred blepharoptosis.

• 한국항공우주학회지
• /
• 제35권3호
• /
• pp.177-182
• /
• 2007

경계요소법을 사용하여 세 가지 유형의 전두부 형상과 비 평면 지면이 FAST 동체의 공력 특성에 미치는 영향을 연구하였다. 본 수치해석 기법을 검증하고 벽면의 영향이 마찰항력에 미치는 영향을 파악하기 위하여 풍동시험을 수행하였다. 채널은 동체의 양력을 증가시키는 효과가 있었다. 최적의 전두부 형상은 동체와 측면 벽 사이의 간격, 동체의 높이와 같은 FAST 및 안내로 설계 조건에 의존하였다. 계산한 유도항력계수 값과 측정한 전항력 값을 비교한 결과 형상 항력은 동체의 고도에 무관하였다. 지면효과를 받지 않는 동체의 형상항력 값을 알고 있다면, 본 수치기법은 고속 지상 운행체의 개념설계에 사용할 수 있다.

• 대한지역사회영양학회지
• /
• 제11권6호
• /
• pp.683-694
• /
• 2006

The purpose of this study was to determine the body weight control, food habits and nutrient intakes according to the obese index in male middle school students. This study was carried out through questionnaires and measurement by body fat analyzer (Inbody 4.0). The subjects were 275 male middle school students in Iksan. Chonbuk province. The average age, height, weight, and BMI of the subjects were 14.4 years old, 167.8 cm, 60.2 kg and $21.3kg/m^2$, respectively. Seventeen point one percent of the subjects were the underweight group, 47.6% were the normalweight group, and 35.3% were the overweight group by the classification of the Korean Pediatrics Society standard. Body fat of underweight, normalweight, and overweight were 16.1%, 19.0%, and 26.6%, respectively. Thirty one point nine percent of underweight, 39.7% of normalweight. and 31.9% of overweight had misperceptions of their weight (p<0.001). Sixty two point two percent of the males were dissatisfied with their body weight, and 55.3% of the whole tried to reduce their body weights. Even though they were normalweight, half of them dissatisfied with their weight. The source of weight control method was friends and family, TV radio, Internet, and school nutrition education, in order. The subjects exercised 3.4 days per week, 70.2 minutes per day, but it was not different significantly by the obese index. Forty percent of the subjects had meals fast, 58.5% of them have biased food habits even if they didn't differ by the obese index. Activity rate was different by the obese index significantly (p < 0.05), the number of severe activity was most in underweight. In conclusion, nutrition education programs should contain the necessity of normalweight, and regularity of lift habits and activities for energy expenditure in overweight students. It made them to recognize their weight correctly, establish healthy body images, and raise the ability to promote health and improve nutritional status.

• International Journal of Automotive Technology
• /
• 제6권3호
• /
• pp.221-227
• /
• 2005

Aim of this study is to investigate an aerodynamic effect of a drag-reducing device on a heavy-duty truck. The vehicle experiences two different kinds of aerodynamic forces such as drag and uplifting force (or downward force) as it is traveling straight forward at constant speed. The drag force on a vehicle may cause an increase of the rate of fuel consumption and driving instability. The rolling resistance of the vehicle may be increased as result of the negative uplifting or downward force on the vehicle. A device named roof-fairing system has been applied to examine the reduction of aerodynamic drag force on a heavy-duty truck. As for a engineering design information, the drag-reducing system should be studied theoretically and experimentally for the best efficiency of the device. Four different types of roof-fairing model were considered in this study to investigate the aerodynamic effect on a model truck. The drag and downward force generated by vehicle has been obtained from numerical calculation conducted in this study. The forces produced on four fairing models considered in this study has been compared each other to evaluate the best fairing model in terms of aerodynamic performance. The result shows that the roof-fairing mounted truck has bigger negative uplifting or downward force than that of non-mounted truck in all speed ranges, and drag force on roof-fairing mounted truck has smaller than that of non-mounted truck. The drag coefficient $(C_D)$ of the roof-fairing mounted truck (Model-3) is reduced up to $41.3\%$ than that of non-mounted trucks (Model-1). A downward force generated by a roof-fairing mounted on a truck is linearly proportional to the rolling resistance force. Therefore, the negative lifting force on a heavy-duty truck is another important factor in aerodynamic design parameter and should be considered in the design of a drag-reducing device of a tractor-trailer. According to the numerical result obtained from present study, the drag force produced by the model-3 has the smallest of all in all speed ranges and has reasonable downward force. The smaller drag force on model-3 with 2/3h in height may results of smallest thickness of boundary layer generated on the topside of the container and the lowest intensity of turbulent kinetic energy occurs at the rear side of the container.

• 국제학술발표논문집
• /
• The 9th International Conference on Construction Engineering and Project Management
• /
• pp.1249-1249
• /
• 2022

The facade, an exterior material of a building, is one of the crucial factors that determine its morphological identity and its functional levels, such as energy performance, earthquake and fire resistance. However, regardless of the type of exterior materials, huge property and human casualties are continuing due to frequent exterior materials dropout accidents. The quality of the building envelope depends on the detailed design and is closely related to the back frames that support the exterior material. Detailed design means the creation of a shop drawing, which is the stage of developing the basic design to a level where construction is possible by specifying the exact necessary details. However, due to chronic problems in the construction industry, such as reducing working hours and the lack of design personnel, detailed design is not being appropriately implemented. Considering these characteristics, it is necessary to develop the detailed design process of exterior materials and works based on the domain-expert knowledge of the construction industry using artificial intelligence (AI). Therefore, this study aims to establish a detailed design automation algorithm for AI-based condition-responsive exterior wall panels and their back frames. The scope of the study is limited to "detailed design" performed based on the working drawings during the exterior work process and "stone panels" among exterior materials. First, working-level data on stone works is collected to analyze the existing detailed design process. After that, design parameters are derived by analyzing factors that affect the design of the building's exterior wall and back frames, such as structure, floor height, wind load, lift limit, and transportation elements. The relational expression between the derived parameters is derived, and it is algorithmized to implement a rule-based AI design. These algorithms can be applied to detailed designs based on 3D BIM to automatically calculate quantity and unit price. The next goal is to derive the iterative elements that occur in the process and implement a robotic process automation (RPA)-based system to link the entire "Detailed design-Quality calculation-Order process." This study is significant because it expands the design automation research, which has been rather limited to basic and implemented design, to the detailed design area at the beginning of the construction execution and increases the productivity by using AI. In addition, it can help fundamentally improve the working environment of the construction industry through the development of direct and applicable technologies to practice.

• 한국건설관리학회논문집
• /
• 제18권2호
• /
• pp.58-70
• /
• 2017

초고층 건축공사에서 리프트카를 이용한 자재 양중 관리는 핵심적인 관리분야 중 하나이다. 기존 연구들은 양중계획의 기본 단위인 양중 사이클타임이나 리프트카의 운행효율은 기존 사례를 참고하여 적용하거나 관리목표로 설정하고 개략적으로 산정하는 한계가 있었다. 따라서 본 연구에서는 양중 사이클타임을 단축하고 가동율을 향상시키기 위하여 자재 양중작업 프로세스를 최적화하는 방법론 제안을 목표로 하였다. CYCLONE 모델을 변형하여 작업시간과 작업위치를 반영할 수 있도록 개선하고, 세부 작업을 조정하여 프로세스를 최적화 하는 방법론을 제안하였다. 이 방법론에 따라 양중작업 프로세스를 개선하고 민감도 분석과 현장 적용성 평가를 실시하였으며 초고층 현장에 적용하였다. 기존 작업 프로세스와 개선된 작업 프로세스를 양중 높이별로 시뮬레이션하고 이를 현장 적용 결과 데이터와 비교하여 양중작업 시간 단축과 가동율 향상 정도를 비교 분석하여 최적화 방법론의 효용성을 검증하였다.

• 대한지역사회영양학회지
• /
• 제12권1호
• /
• pp.13-24
• /
• 2007

This study was to investigate dietary life and eating-out style related to breakfast frequency of male students in culinary college. This survey was conducted using questionnaires for 110 male students at college in Hongseung. Mean height and body weight of those we investigated was 174 cm and 70.5 kg. The one to two times per week breakfast eating group was 34.55%, which is exceedingly numerous; none per week breakfast eating group was 30%; three to tow times per week breakfast eating group was 15.45%; everyday breakfast eating group was only 9.09%. The breakfast frequency was very low, and the not-eating breakfast problem is serious to think of in male college students. Mean weight, body fat and body mass index(BMI) of the everyday breakfast eating group was lower than the other group even it was not significant. The self-boarding house or dormitory living condition group was not eating breakfast was significant. So a correct dietary lift and eating habit should be taught further for male college students. The smoking group was a significant low frequency of breakfast eating, as well as the lower frequency of breakfast, or worse recognition of self health condition. Higher frequency of breakfast showed more contentment of self body weight. Cooked rice was significantly the most preferable for breakfast. The lower breakfast frequency tended to eat breads or cereals. The lower frequency of breakfast, self recognition of eating rate as speedier was significant, and tended to have a higher frequency of eating-out because of being annoyed by cooking. The lower breakfast frequency ate out more. Twenty five percent of the everyday breakfast eating group ate out because of a special day, and thirty five percent of the not eating breakfast group did so because of being annoyed by cooking. Their mean dietary evaluation grade was under the normal grade, which means that culinary college male students' dietary lives were poor. The lower frequency of breakfast and lower grade of food life evaluation, indicates the importance of nutritional breakfasts education should be improved for male culinary college students also.

• 대한기계학회논문집B
• /
• 제35권3호
• /
• pp.309-319
• /
• 2011

질소 희석된 프로판 부상화염에서 열손실에 의한 자기진동을 기초로 화염안정화선도를 도출하기 위하여 노즐직경 0.3 mm, 1.0 mm에서 실험적 연구를 수행하였다. 예혼합화염에서 확산화염으로의 전도 열손실에 의한 자기진동 및 매연 복사에 의한 자기진동을 관찰하였다. 0.1 Hz보다 낮은 주파수 성향을 띄는 열손실에 의한 자기진동은 제안된 메커니즘에 의해 잘 묘사되었고 반면 매연복사에 의한 자기진동은 O(0.1 Hz)의 주파수 범위를 나타내었으며 제안된 메커니즘은 항온항습실 실험을 통해 입증하였다. 질소 희석된 프로판 부상화염에서 관찰된 열손실에 의한 자기진동의 특성화는 관련된 변수 및 스트라훌 수에 의해 잘 묘사되었다.

• 한국산학기술학회논문지
• /
• 제20권10호
• /
• pp.415-424
• /
• 2019

최근 고령인구의 증가로 인해 실내 외에서 고령자들이 편리하게 생활할 수 있는 다양한 재활복지기기에 대한 관심이 증가하고 있다. 본 논문에서는 거동이 불편한 노인 또는 장애인들 스스로가 좁은 실내에서 안전하고 편리하게 이동과 이승이 가능하도록 최소 회전반경과 문턱 극복을 포함하여 설계 제작하였다. 좌식문화가 발전한 실내 환경에서 골절질환, 노인질환 및 기타 무릎, 허리질환을 가진 사용자의 이승 편의성을 제공하고자 하였다. 먼저 실내에서 이 승강이 가능하도록 프레임에 기본적으로 링크, 시트, 암레스트, 커버, 모터, 감속기, 배터리, 충전기, 센서, 컨트롤러 기구물 등을 부착하였다. 사용자의 환경과 신체적 특징을 고려하여 제품 디자인과 구조물을 설계하였으며, 고령자 또는 장애인이 실내에서 일상생활을 지원할 수 있도록 IoT 기능을 추가하였다. 제작된 실내 이 승강 휠체어의 동작성능을 확인하기 위해 구동실험을 수행하였다. 연속 주행시간, 회전반경, 액추에이터 최대부하, 최대 승강 높이, 음압레벨, 운행 보조센서 센싱 최소거리, 서버 및 앱 프로그램 상호 연동과 기기호환성, 듀티 사이클 오차율 시험성능 테스트를 수행하였다. 시험결과, 제작된 휠체어는 각 항목의 성능시험 목표 값을 달성하였으며, 성공적으로 작동하는 것으로 나타났다.

• 한국농업기계학회:학술대회논문집
• /
• 한국농업기계학회 2000년도 THE THIRD INTERNATIONAL CONFERENCE ON AGRICULTURAL MACHINERY ENGINEERING. V.II
• /
• pp.489-497
• /
• 2000

Since Chinese cabbages weigh 3 to 5kgf and are big in size at the time of harvest, handling operations such as harvesting, loading and unloading including transportation require the highest labor demand among all other cultivation processes. Recently, though several cabbage harvesters were developed in Japan and Europe, those harvesters were not suitable for Chinese cabbages cultivated in Korea because of the size and shape. The cabbage harvester is almost meaningless without any proper cabbage piling and pallet unloading mechanism. Most harvesters developed so far adopted a sort of slide and free falling way in collecting cabbages into the pallet. Three or four labors are usually required for cleaning incoming cabbages and loading those in the pallet. Because of the required time for piling cabbages without severe damage and the required space capacity to carry empty and loaded pallets, harvesting speed should be adjusted in accordance with time required for consecutive operations. Up to now, any automatic or semi-automatic collecting device has not been developed in the world to pile cabbages on the layer one by one into the pallet in the ordered way with little damage and to unload pallet from the harvester continuously during the harvest process. To compromise system expenses and function, Semi-automatic cabbage piling and pallet unloading mechanism was devised and it required one labor. The foldable mesh pallet with a size of 1050mm x 1050mm x 1000mm and holding capacity of around 70 cabbages was utilized. The prototype for piling and unloading mechanism was composed of three parts such as feeding device, automatic piling device with retractable bellows, and pallet unloading device. Prior to developing the prototype, the geometric properties and the amount of the damage of the cabbage caused during the piling operation were investigated. Considering the height of the pallet, a series of cabbage carrying plates were mounted to the bracket chain to lift and to carry cabbages to the loading device. Indoor laboratory experiments showed that the cabbage carrying chain conveyor worked successfully. Considering the conveying speed 0.46m/sec of the pull up belt from the cabbages on the ground, the speed of cabbage carrying chain conveyor worked property in the range of 0.26m/sec to 0.36m/sec. The system allowed the operator to modify the position of cabbage slightly. Overall system worked successfully resulting into almost same capacity without severe damage to the cabbage as human did.