• 한국컴퓨터정보학회논문지
• /
• 제23권1호
• /
• pp.111-116
• /
• 2018

Recently, IoT and Big Data dealing with voluminous and complex sensitive information is one of the key issues in the era of the 4th industrial revolution. There have been a lot of studies to store the collected and processed sensitive information safely in storage data. Especially biometric information, if it is leaked and becomes identity theft, is hard to be corrected and results in serious event. To fix the problem, methods such as FIDO or KFTC have been proposed. In this paper, we propose a modified method of TTAK.KO-12.0098 according to the environment of this paper and propose a method of safely storing the generated disposable template in a block chain. We show that our method is better by comparing the existing method and the security analysis.

• 한국자동차공학회논문집
• /
• 제3권5호
• /
• pp.64-73
• /
• 1995

A numerical simulation of heat and fluid flow for predicting the effect of passage arrangement in automotive heat battery has been performed. The system is assumed to be a two-dimensional laminar flow and isothermal boundary is applied to the surface of the latent heat storage vessel. In the case of ideal heat battery the flow rate into each flow passage is evenly distributed. The various models are considered in the view of pressure drop and bulk temperature. The effects on the efficiency of the heat battery are examined by varying geometrical factors such as flow passage clearance, length of a inlet and outlet tank and the length of a latent heat storage vessel. The flow clearance is a very important -factor on the efficiency of a heat battery. As the flow passage clearance becomes narrow, the flow distribution becomes uniform and the bulk temperature increases, however the pressure drop is large. Therefore, optimal flow passage clearance has to be chosen. The present work can be used in optimizing heat battery efficiency.

• Journal of Power Electronics
• /
• 제9권6호
• /
• pp.919-928
• /
• 2009

Microgrids (MGs) are typically comprised of distributed generators (DGs) including renewable energy sources (RESs), storage devices and controllable loads, which can operate in either interconnected or isolated mode from the main distribution grid. This paper introduces a novel dynamic programming (DP) approach to MG optimization which takes into consideration the coordination of energy supply in terms of heat and electricity. The DP method has been applied successfully to several cases in power system operations. In this paper, a special emphasis is placed on the uncontrollability of RESs, the constraints of DGs, and the application of demand response (DR) programs such as directed load control (DLC), interruptible/curtaillable (I/C) service, and/or demand-side bidding (DSB) in the deregulated market. Finally, in order to illustrate the optimization results, this approach is applied to a couple of examples of MGs in a certain configuration. The results also show the maximum profit that can be achieved.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2002년도 하계종합학술대회 논문집(3)
• /
• pp.177-180
• /
• 2002

This paper introduces a new distributed QoS (Quality of Service) control system for clusters of web servers. The proposed system can employ not only network bandwidth but also other metrics such as processor load, memory usage, and storage access load that affect the overall system performance. Moreover, it controls over clustered\ulcorner workstations in of-der to utilize idle resources among workstations. This architecture maximizes overall usage of cluster of web servers while it provides predictable and differentiated performance for each contents volume. We implemented a prototype of introduced system, and the test results showed the proposed method can control QoS in a cluster server system.

• Journal of Power Electronics
• /
• 제11권3호
• /
• pp.350-359
• /
• 2011

This paper describes the operational analysis results of a DC micro-grid using a detailed model of distributed generation. A detailed model of wind power generation, photo-voltaic generation and fuel cell generation was implemented with an userdefined model created with PSCAD/EMTDC software and coded in C-language. The operational analysis was carried out using PSCAD/EMTDC software, in which the power circuit is implemented by a built-in model and the controller is modeled by an user-defined model that is also coded in C-language. Various simulation results confirm that a DC micro-grid can operate without any problems in both the grid-tied mode and in the islanded mode. The operational analysis results confirm that the DC micro-grid makes it feasible to provide power to the load stably. It can also be utilized to develop an actual system design.

• Progress in Superconductivity
• /
• 제14권1호
• /
• pp.66-70
• /
• 2012

Superconductor flywheel energy storage system (SFESs) is an electro-mechanical battery with high energy storage density, long life, and good environmental affinity. SFESs have been developed for application to a regenerative power of train, the storage of distributed power sources such as solar and wind power, and a power quality improvement. As superconductor bearing is completely passive, it is not necessary to control a system elaborately but accurate analysis in mechanical properties of the HTS bearing is very important for application to SFESs. Stiffness and damping properties are the main index for evaluation the capacity of HTS bearings and make it possible to adjust rotordynamic properties while operating the rotor-bearing system. The superconductor bearing consists of a stator containing single grain YBCO bulks, a ring-type permanent magnet rotor with a strong magnetic field that can reach the bulk surface, and a bearing support for assembly to SFESs frame. In this study, we investigated the stiffness and damping properties of superconductor bearings in 35 kWh SFESs. Finally, we found that 35 kWh superconductor bearing has uniform stiffness properties depend on the various orientations of rotor vibration. We discovered total damping coefficient of superconductor bearing is affected by not only magnetic damping in superconductor bulk but also external damping in bearing support. From the results, it is confirmed that the conducted evaluation can considerably improve energy storage efficiency of the SFESs, and these results can be used for the optimal capacity of superconductor bearings of the SFESs.

• Journal of Power Electronics
• /
• 제18권4호
• /
• pp.1111-1126
• /
• 2018

In modern power systems, distributed generators (DGs) result in high stress on system frequency stability. Apart from the intermittent nature of DGs, most DGs do not contribute inertia or damping to systems. As a result, a new control method referred to as a virtual synchronous machine (VSM) has been proposed, which brought new characteristics to inverters such as synchronous machines (SM). DGs employing an energy storage system (ESS) provide inertia and damping through VSM control. Meanwhile, energy storage presents some physical constraints in the VSM implementation level. In this paper, a VSM mathematical model is built and analyzed. The dynamic responses of the output active power are presented when a step change in the frequency occurs. The influences of the inertia constant, damping factor and operating point on the ESS volume margins are investigated. In addition, physical constraints are proposed based on these analyses. The proposed physical constraints are simulated using PSCAD/EMTDC software and tested through RTDS experiment. Both simulation and RTDS test results verify the analysis.

• 한국도서관정보학회지
• /
• 제44권2호
• /
• pp.267-291
• /
• 2013

디지털시대의 인쇄물 관리는 지난 10여 년간 국내외 도서관의 주요 현안으로 인식되어 왔으며 이에 대한 장기적이고 체계적인 방안을 모색하려는 노력이 이루어 진 바 있다. 특히 인쇄본저널의 경우 디지털저널의 등장이후 지속적인 이용률 감소와 도서관의 공간 부족 문제로 이어지면서 인쇄본저널의 새로운 보존 및 영구적인 아카이빙 구축에 대한 필요성이 대두되었다. 본 연구에서는 디지털시대의 인쇄본저널 아카이빙 관리 전략에 대한 선행연구 및 북미를 중심으로 진행된 웨스트 공동보존협약(WEST, Western Regional Storage) 프로젝트 사례를 고찰하고 분석함으로써 인쇄본저널의 보존에 대한 새로운 관리방안 및 향후 전망을 제시하고자 하였다.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 제26회 KOSCO SYMPOSIUM 논문집
• /
• pp.75-83
• /
• 2003

Diode laser absorption system is advantageous of their non-invasive nature, fast response time, high sensitivity and real-time measurement capability. Furthermore, recent advances in room-temperature, near-IR and visible diode laser sources for telecommunication, optical data storage applications are enabling combustion diagnostics system based on diode laser absorption spectroscopy. So, combined with fiber-optics and high sensitive detection strategies, compact and portable sensor system are now appearing for a variety of applications. The objective of this research is to take advantage of distributed feed-back diode laser and develope new gas sensing system. It experimentally found out that the wavelength, power characteristics as a function of injection current and temperature. In addition to direct absorption and wavelength modulation spectroscopy have been demonstrated in these experiments and have a bright prospect to this diode laser system.

• Journal of international Conference on Electrical Machines and Systems
• /
• 제1권4호
• /
• pp.425-433
• /
• 2012

As the demand for electric power increases rapidly and the amount of fossil fuels decreases year by year, making use of renewable resources seem very necessary. However, due to the discontinuous nature of renewable resources and the hierarchical topology of existing grids, power quality and grid stability will deteriorate as more and more distributed generations (DGs) are connected to the grids. It is a good idea to combine local utilization, local consumption, energy storage and DGs to form a grid-friendly micro grid, these micro grids can then assembled into an intelligent power system - the smart Grid. It can optimize power flow and integrate power generation and consumption effectively. Most importantly, the power quality and grid stability can be improved greatly. This paper depicts how the smart grid addresses the current issues of a power system. It also figures out the key technologies and expectations of the smart grid.